Vislumbres da celebração do Dia da Mulher na Atul, Gujarat.
Mulheres talentosas, trabalhadoras e felizes em nossos escritórios estão tornando a equipe Atul mais poderosa.
Março de 2020: Celebração do Dia da Mulher na Atul
Posted in Global Updates
Dezembro de 2019: Equipe Floras na SIAL
Recentemente, a empresa Floras da Atul Ltd participou da edição de 2019 da SIAL Oriente Médio, realizada no Abu Dhabi National Exhibition Center. Foi adorável conhecer todos!
A Global Food Marketplace (francês: Salon International de l’alimentation, ou SIAL) é uma feira comercial realizada a cada dois anos, focada na indústria de processamento de alimentos.
Posted in Global Updates
Novembro de 2019: Equipe Atul na CPhI India
Membros da equipe Atul na CPhI Índia – o trabalho em equipe faz o sonho virar realidade!
Posted in Global Updates
Outubro de 2019: Expansão das instalações da DPD Ltd no valor de 2.5 milhões de libras
Posted in Global Updates
Setembro de 2019 Programa de lançamento do 5S
A Empresa crê que o 5S é essencial para alcançar o seu objetivo de desenvolvimento sustentável. Tínhamos iniciado o movimento 5S há poucos anos e temos estado a implementar a iniciativa nas nossas fábricas ao nível básico. Agora, é importante passarmos ao próximo nível de implementação do 5S. Foi anunciado um relançar do movimento numa reunião de abertura organizada a 2019 de agosto de 2019, na Sala Multiusos da Atul Vidyalaya.
A equipa comprometeu-se a desenvolver o movimento 5S, para fazer dele um sucesso. O nome e logótipo do movimento – Swayan, foi revelado. Os vencedores do concurso de atribuição de nome e questionário foram felicitados pelo nosso Diretor Geral. O Sr. Sunil Lalbhai no seu discurso pediu à equipa para assumir e ser parte da mudança para fortalecer as nossas raízes melhorando os sistemas.
Posted in Global Updates
Lapox APR-103 | Alhyl phenol formaldehyde resin; p-tert butyl phenol; polychloroprene rubber; Longer tack time; Footwear; Carpet; leather; Furniture; automotive;
Appearance : Dark violet lumps | Colour (Gardner) : > 18 | Methylol content (%) : 12 – 16 | Softening point (oC): 85 – 105
Posted in PO PM Industry
Lapox APR-102 | Alhyl phenol formaldehyde resin; p-tert butyl phenol; polychloroprene rubber; Longer tack time; Footwear; Carpet; leather; Furniture; automotive;
Appearance : Pale yellow lumps | Colour (Gardner) : Max 6 | Methylol content (%) : 14 – 17 | Softening point (oC) : 90 – 100
Posted in PO PM Industry
Lapox APR-101 | Alhyl phenol formaldehyde resin; p-tert butyl phenol; polychloroprene rubber; Longer tack time; Footwear; Carpet; leather; Furniture; automotive;
Appearance : Pale yellow lumps | Colour (Gardner) : Max 4 | Methylol content (%) : 8 – 12 | Melting point, capillary (oC) : 63 – 75 | Softening point (oC) : 65 – 80
Posted in PO PM Industry
Agosto de 2019: Yuvaan
Yuvaan, um programa de entretenimento cheio de diversão e empenhamento para mostrar o talento dos membros da nossa equipa foi organizado na Atul na semana passada. O evento motivou grande participação e união, com uma grande variedade de programas como canto, dança, teatro e comédia stand-up.
Posted in Global Updates
Julho de 2019: 42nd Reunião Geral Anual da Atul Ltd
A 42ª Reunião Anual da Administração dos Membros da Atul Ltd realizou-se a 31 de julho de 2019 na Associação de Gestão de Ahmedabad, em Ahmedabad.
Posted in Global Updates
Junho de 2019: Prêmio Green Gujarat 2019
O Green Gujarat Awards 2019 foi concedido à Atul Ltd, Ankleshwar no Dia Mundial do Meio Ambiente, 05 de junho de 2019. O prêmio foi recebido por Shri Ganpatbhai Vasava, o Excelentíssimo Ministro do Meio Ambiente e Florestas, Governo de Gujarat. O Excelentíssimo Ministro da Energia, Shri Suaravbhai Patel foi o Convidado Principal do evento. Um certificado de agradecimento foi apresentado à equipe Aromatics pela contribuição na reciclagem e reutilização de águas residuais. O evento foi promovido pelo Departamento de Mudanças Climáticas, Governo de Gujarat e foi organizado pela News 18.
Posted in Global Updates
Junho de 2019: Prêmio Kaizen de Excelência 5S
A equipe RE participou da competição Kaizen – 5S para Transformação Cultural em Casa, Local de Trabalho e Nova Índia, realizada em 21 e 22 de maio de 2019 em Surat. Eles compartilharam as melhores práticas na implementação do 5S nas respectivas unidades da Atul e também receberam o Prêmio de Excelência Kaizen 5S.
Posted in Global Updates
Allyl caproate | CAS No. 123-68-2 | Allyl hexanoate; Hexanoic acid , 2-propenyl ester; aldehyde C19; Allyl ncaproate;2-Propenyl n – hexanoate; hexanoic acid, 2-propen-1- yl ester ; prop-2-en -1-yl hexanoate; prop-2-enylhexanoate; 2- propenyl hexanoate
An aroma ingredient to enhance pineapple, fruity, sweet and juicy odour, widely used by cosmetics and flavour industry.
Posted in Aromatics
Allyl heptanoate | CAS No. 142-19-8 | 2-Propenyl n – hexanoate
An aroma chemical with fruity, wine and banana like odour, used to make flavours and fragrances for personal care industry.
Posted in Aromatics
2-Methylcyclohexyl acetate (o-MCHA) | CAS No. 5726-19-2 | ortho Methyl cyclo hexyl acetate
A value added down-stream of ortho Cresol, which plays a key role in the manufacturing of hydrogen peroxide (H2O2). Atul Ltd is the only manufacturer of 2-Methylcyclohexyl acetate, with a captive source of ortho Cresol.
Posted in Aromatics
2 nitro para cresol | CAS No. 119-33-5 | 4-Methyl-2-nitrophenol
A dye intermediate in organic synthesis.
Posted in Aromatics
Maio de 2019: Encontro de analistas, Mumbai
A Atul organizou seu encontro anual de analistas na semana passada em Mumbai para compartilhar o desempenho da empresa.
Posted in Global Updates
Abril de 2019: um novo mundo @ na ponta dos seus dedos
Como um pequeno passo à frente em nosso esforço para oferecer educação de qualidade às crianças das aldeias do interior, recentemente, a Fundação Atul doou cinco tablets para uma escola de uma vila em Maan Taluka de Satara, Maharashtra, que foi atingida pela seca.
Até agora, isso permitiu que 120 alunos assistissem a vídeos educacionais e ampliassem sua base de conhecimento.
Posted in Global Updates
Março de 2019: Comemoração da 48ª Semana Nacional de Segurança
A 48ª Semana Nacional de Segurança foi comemorada de 04 a 11 de março de 2019. Várias atividades foram organizadas para criar conscientização quanto à segurança industrial entre os membros da família Atul.
Posted in Global Updates
Março de 2019: CAC, Xangai
Nossa equipe de proteção de culturas participou da Exposição Internacional de Agroquímicos e de Proteção de Culturas da China, em Xangai. As empresas aproveitaram esta oportunidade para conhecerem os clientes e parceiros de negócios para discutirem produtos, serviços e muito mais.
Posted in Global Updates
Janeiro de 2019: Atul na Cúpula Global Vibrant Gujarat
A Atul participou da Cúpula Global Vibrant Gujarat, 2019. A Cúpula foi inaugurada pelo Excelentíssimo Primeiro Ministro da Índia, Shri Narendra Modi.
Posted in Global Updates
Janeiro de 2019: Atul na ICERP
A empresa de materiais de desempenho de polímeros participou da ICERP 2019, realizada no Centro de Exposições de Bombaim, em Mumbai. As empresas aproveitaram a oportunidade para compartilharem ideias e conhecimento técnico com nossos clientes.
Posted in Global Updates
Dezembro de 2018: Visita de Nouryon a Atul Vidyamandir
A Nouryon fechou parceria com a Fundação Atul para fornecer comprimidos de ácido fólico de ferro aos estudantes dos três institutos gerenciados pela Fundação. O objetivo dessa iniciativa é o de melhorar os níveis de hemoglobina dos estudantes (principalmente os das crianças tribais). Depois de realizar os exames de sangue, os estudantes com deficiências de ferro foram identificados e receberam comprimidos.
Foram realizadas várias sessões de conscientização para alunos e pais quanto à importância de uma dieta equilibrada e atividades físicas como parte dessa iniciativa.
Posted in Global Updates
Novembro de 2018: O Poligrip® HVAC é usado para isolar os dutos CA de alta da Estátua da Unidade
É com satisfação que compartilhamos que um dos produtos da Atul, o Polygrip HVAC, foi usado para isolar os dutos CA de alta qualidade durante a construção da Estátua da Unidade, que foi revelada hoje por Narendra Modi, Primeiro-Ministro da Índia.
Posted in Global Updates
Novembro de 2018: O Poligrip® HVAC é usado para isolar os dutos CA de alta qualidade da Estátua da Unidade
É com satisfação que compartilhamos que um dos produtos da Atul, o Polygrip HVAC, foi usado para isolar os dutos CA de alta qualidade durante a construção da Estátua da Unidade, que foi revelada hoje por Narendra Modi, Primeiro-Ministro da Índia.
Posted in PO Retail Updates
Lapox ARTF-39 | aerospace; multifunctional resin; MDA; high performance; Composites
Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 150oC (mPa s) : 2,500 – 4,000
Posted in PO PM Industry
Lapox ARTF-32 | aerospace; multifunctional resin; specialty resin; MDA based; Methylenediamine
Colour (Gardner) : Max 18 | Epoxy value (Eq/kg) : 7.40 – 8.50 | Viscosity @ 150oC (mPa s) : 2,000 – 4,000
Posted in PO PM Industry
Lapox 37% Formaldehyde | Construction; Formaldehyde; thermoset resin; chemical synthesis; 37% formaldehyde; Coatings
Appearance : Clear colourless solution | Formaldehyde content: 37 ± 0.50 | Methanol content: Max 5 | Specific gravity
: 1.095 – 1.115 | pH : 2.80 – 5.00
Posted in PO PM Industry
Lapox ARL-13 | aerospace, bifunctional resin
Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,000
Posted in PO PM Industry
Outubro de 2018: Prêmio de Excelência do Instituto de Contadores da Índia
A Atul Ltd recebeu o 1º prêmio de Excelência em Gestão de Custos no 15º Prêmio Nacional apresentado pelo Institute of Cost Accountants of India, na categoria Privado – Manufatura – Grande (com faturamento entre Rs 2.500 cr a 5.000 cr). O prêmio foi entregue por Shri Piyush Goyal, Ministro das Ferrovias e Carvão da União.
Posted in Global Updates
Lapox 37% Formaldehyde | Construction; Formaldehyde; thermoset resin; chemical synthesis; 37% formaldehyde; Coatings
Appearance : Clear colourless solution | Formaldehyde content: 37 ± 0.50 | Methanol content: Max 5 | Specific gravity
: 1.095 – 1.115 | pH : 2.80 – 5.00
Posted in PO PM Product
Lapox ARN-16 | bifunctional; Naphthalene based; structural adhesive; high performance
Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 6.50 – 7.50 | Viscosity @ 50oC (mPa s) : 1,000 – 2,500 | HyCl (%) : Max 0.20
Posted in PO PM Product
Lapox ARTF-39 | aerospace; multifunctional resin; distilled unmodified resin; m-amino phenol based; high performance
Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 150oC (mPa s) : 2,500 – 4,000 | HyCl (%) : Max 0.10
Posted in PO PM Product
Lapox ARTF-32 | aerospace; multifunctional resin; specialty resin; MDA based; high performance
Colour (Gardner) : Max 18 | Epoxy value (Eq/kg) : 7.40 – 8.50 | Viscosity @ 150oC (mPa s) : 2,000 – 4,000 | HyCl (%) : Max 0.10
Posted in PO PM Product
Junho de 2018: Chemspec Europe
As empresas de produtos aromáticos, químicos e farmacêuticos a granel participaram da Chemspec Europe, realizada em Colônia, na Alemanha. As empresas aproveitaram esta oportunidade para conhecerem os clientes e parceiros de negócios para discutirem produtos, serviços e muito mais.
Posted in Global Updates
Junho de 2018: Dia Mundial do Meio Ambiente
A Atul está comprometida com a conservação do meio ambiente desde a sua criação. Como parte das comemorações do Dia Mundial do Meio Ambiente, foram organizadas várias atividades para divulgar o desenvolvimento sustentável, especialmente a proteção ao meio ambiente. A celebração de uma semana começou com a exibição de um documentário sobre “combater a poluição de plásticos”. Os membros da equipe e suas famílias se reuniram para plantar mudas perto da Escola Kalyani, a primeira escola criada pela Atul. Isso foi seguido por uma limpeza conduzida realizada na colina de Parnera e na praia de Tithal, Valsad.
Posted in Global Updates
Lapox AH-338 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 50 | Pot life @ 25oC : 600 min – 700 hr
Posted in PO PM Product
Lapox AH-337 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 50 | Pot life @ 25oC : 300 min – 380 hr
Posted in PO PM Product
Lapox AH-336 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 20 – 100 | Pot life @ 25oC : 80 min – 100 hr
Posted in PO PM Product
Lapox AH-335 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 20 – 100 | Pot life @ 25oC : 50 min – 60 hr
Posted in PO PM Product
Lapox AH-334 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 150 | Pot life @ 25oC : 25 min – 35 hr | Mixing ratio (Parts by weight) : 32
Posted in PO PM Product
Lapox AH-333 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 150-300 | Pot life @ 25oC : 14 min – 20 hr
Posted in PO PM Product
Lapox AH-332 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32
Posted in PO PM Product
Lapox AH-311 | aliphatic amine; curing agent; composite; adhesive; coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32
Posted in PO PM Product
Maio de 2018: Encontro de analistas.
A Atul Ltd organizou seu Encontro Anual de Analistas no dia 04 de maio em Vivanta, no hotel Taj-President, para compartilhar detalhes de desempenho e futuros planos da empresa com gestores de fundos, empresas de gestão de ativos, corretoras, fundos mútuos, analistas e outras partes interessadas.
Cerca de 200 pessoas participaram do evento.
Para visualizar a apresentação realizada no Encontro de Analistas, clique aqui.
Posted in Global Updates
Abril de 2018: urmi dukan – um passo à frente na jornada Urmi
A Urmi foi fundada em 1953 pela Atul Ltd com o objetivo de capacitar as mulheres. Ao longo dos anos, as especiarias secas ao sol, trituradas e preparadas de forma tradicional se tornaram a identidade da organização. Cada etapa do processo de produção é realizada por mulheres das aldeias vizinhas.
Compre agora na urmi dukan – a primeira loja de varejo criada pela Urmi.
próximo a Atul Club, Atul (Gujarat)
aperta 7 dias da semana
das 9h – 20h
Para obter mais informações, ligue (+91) 81403 80444 ou escreva para urmi@atul.co.in
Posted in Global Updates
Lacare® AM 70
Lacare® AM 70 is a multi-purpose maintenance spray especially designed to meet the requirements of preventive and corrective maintenance for industrial use, automobiles and common household applications.
Lacare® AM 70 is available in the pack size of 45 g, 85 g and 400 ml.
Posted in Polymer Retail
Lacare® Channel Spray
Lacare® Channel Spray is a superior polymer-based spray used for improving the sliding movement of glass used in car windows. It is especially made to lubricate the rubber beading, plastic and other assemblies used in the sliding windows of automobiles.
Lacare® Channel Spray is available in the pack size of 60 g.
Posted in Polymer Retail
Lacare® Chain Lube
Lacare® Chain Lube is a superior oil based chain lubricant for open chain of bike driven at very high speeds where the chain is exposed to moisture and dusty environments.
It is ideal for chains that are standard as well as with O-ring, X-ring and Z-ring.
Lacare® Chain Lube is available in the pack size of 70 g.
Posted in Polymer Retail
LAPOX® TILEGRIP: uma adição recente à nossa marca Lapox®
LAPOX® TILEGRIP: a high performance, cementitious tile fixing adhesive
APPLICATIONS
– Fixing floor and wall tiles (internal and external)
– Fixing thin bed tiles and medium format tiles
– Cladding of vitrified tiles, ceramic tiles, porcelain, mosaic, granite and marble
BENEFITS
– Non-skid, self-curing and highly durable
– Flexible and impact resistant
– Excellent adhesion and low shrinkage
– Does not require hacking or mechanical key to bond tiles
PACKAGING
20 kg
Posted in PO Retail Updates
LACARE® CHANNEL SPRAY: uma adição recente à nossa marca®
Lacare® is a recently introduced range of maintenance products for automobile, industrial and household applications.
Channel spray:
– Can be applied on rubber channels of glass windows used in cars
– Ensures the smooth movement of manual and power window glass
– Does not stain
– Guards rubber channels from hardening
– Easily penetrates into rubber channels
PACKAGING
60 g
Posted in PO Retail Updates
LACARE® CHAIN LUBE: a recent addition to our Lacare® brand
Lacare® is a recently introduced range of maintenance products for automobile, industrial and household applications.
Chain Lube:
– Can be applied on open chains of bikes driven at high speeds + standard chains, O-ring chains, X-ring chains and Z-ring chains
– Increases chain life
– Resists water and rust
– Reduces friction
– Retains stickiness for a long duration
PACKAGING
70 g
Posted in PO Retail Updates
Fevereiro de 2018: Urmi – Oportunidade de negócios
A Urmi foi fundada pela Atul Ltd em 1953 com o objetivo de capacitar as mulheres, envolvendo-as em atividades objetivas. Ao longo dos anos, especiarias frescas, preparadas de forma tradicional e artesanalmente por mulheres das aldeias vizinhas, tornaram-se a identidade da organização. Essas mulheres gerenciam todo o processo de produção, desde a secagem ao sol, triturar a mistura a e embalagem.
Estamos felizes em recebê-lo para fazerem parte da nossa jornada de crescimento na Urmi. Para os interessados em distribuir especiarias, entrem em contato conosco.
| Quantidade (de especiarias) | 20-40 kg | 41-60 kg | 61-80 kg |
| Comissão (% do valor total da fatura) | 10% | 12% | 15% |
(+91) 81403 80444
urmi@atul.co.in
Posted in Global Updates
Fevereiro de 2018: SILVER SHIELD – Prêmio ICAI de Excelência
Temos o prazer de compartilhar que o Relatório Anual da Atul 2016-17 ganhou recentemente o Silver Shield através de um júri presidido por Shri M. Damodaran, ex-presidente do Conselho de Valores Mobiliários da Índia (SEBI), entre as inscrições recebidas na categoria Setor de Manufatura dos Prêmios ICAI de Excelência em Relatórios Financeiros para o ano de 2016-17.
Agradecemos à equipe envolvida por sua contribuição, apoio e trabalho duro. Para visualizar nosso Relatório Anual, clique aqui.
Posted in Global Updates
Março de 2018: Visite-nos na CAC, em Xangai
A equipe Atul o convida para visitar a CAC 2018. Esperamos compartilhar mais informações sobre nossos produtos e conhecimento técnico com nossos clientes e parceiros.
Será um prazer conhecê-lo.
Posted in Global Updates
Março de 2018: Visite-nos em JEC WORLD | PAINT INDIA
A empresa Polymers Performance Materials tem prazer em convidá-lo para o JEC WORLD | PAINTINDIA 2018.
Mostraremos a nossa variedade de produtos e consideraremos uma oportunidade para compartilhar ideias e conhecimento técnico com nossos clientes.
Esperamos que você consiga vir e estamos ansiosos para vê-lo!
Posted in Global Updates
19 de dezembro de 2017: Lembrar de Shri Kasturbhai Lalbhai em seu 123º aniversário de nascimento
Não foi apenas o mundo dos negócios que se beneficiou da visão de Kasturbhai. Ele enriqueceu o tecido educacional, social e cultural da nossa nação com igual distinção. Foi sua firme adesão aos valores que o fizeram verdadeiramente notável. Um visionário e pioneiro astuto, humanitário dedicado e líder de caráter destacado, Kasturbhai levou uma vida que continua a nos inspirar todos os dias.
Estamos comprometidos com sua visão e inclinamos a cabeça em reverência.
Posted in Global Updates
Lapox® Metalam-B
Lapox Metalam is a two-component modified epoxy system. The product is ideal for applications such as coating and laminating glass, metals, plastic, wood, paper stickers and natural stones. It is available in pack sizes of 1.5 kg and 7.5 kg.
Posted in Polymer Retail
Lapox® Metalam-A
Lapox Metalam is a two-component modified epoxy system. The product is ideal for applications such as coating and laminating glass, metals, plastic, wood, paper stickers and natural stones. It is available in pack sizes of 1.5 kg and 7.5 kg.
Posted in Polymer Retail
Lapox® Granito ASR-200_AS-400
Lapox Granito is a two-component modified epoxy based system. The product is ideal for applications such as casting of decorative parts and table top. It is available in pack sizes of 1.25 kg, 5 kg and 10 kg.
Posted in Polymer Retail
Novembro de 2017: Atul na CPhI India
Representantes de empresas aromáticas, químicos e farmacêuticos a granel participaram da CPhI India, Mumbai. Eles procuraram pelos clientes e parceiros para discutirem as soluções e produtos de alta qualidade para atenderem às suas necessidades exclusivas de fabricação.
Posted in Global Updates
Novembro de 2017: Urmi já tem sua licença FSSAI
Fundada pela Atul Ltd em 1953, a Urmi trabalha para empoderar as mulheres. Especiarias frescas e preparadas de forma tradicional são a identidade da organização. As mulheres das aldeias vizinhas estão envolvidas na secagem, esmagamento, mistura e embalagem dessas especiarias. Triturar dá um aroma distinto, aparência e sabor que diferencia os produtos daqueles normalmente disponíveis. Pimenta malagueta (suave, média e quente), coentro em pó, garam masala, masala em picles, chá masala e açafrão em pó são os principais produtos.
Com sua licença FSSAI, a Urmi se esforça para disponibilizar seus produtos a mais pessoas e expandir seu alcance.
Posted in Global Updates
Outubro de 2017: Inauguração da nova usina
No dia promissor de Laabh Panchami de 2017, a Atul inaugurou sua nova usina – o maior projeto da história da empresa.
As unidades de caldeiras, usinas de carvão, turbinas e manuseio cinzas da fábrica são operadas pela DCS e a instalação é gerenciada por uma equipe de cerca de 80 pessoas.
Com 106 m, a chaminé da RCC foi construída como parte desse projeto é a estrutura mais alta de Atul.
Posted in Global Updates
October 25, 2017: Colors Business inaugurated its new Analytical laboratory at Atul
On October 25, 2017 on the auspicious occasion of Laabh Pancham (Gyaan Panchami), our Colors Business inaugurated its new Analytical laboratory at Atul.
Well-equipped with the latest spectroscopic instruments, this state-of-the-art facility will enhance the quality assurance of dyes and high-performance pigments offered by Atul.
Posted in Colors Updates
25 de outubro de 2017: A Colors Business inaugurou seu novo laboratório analítico em Atul
Em 25 de outubro de 2017, na promissora ocasião de Laabh Pancham (Gyaan Panchami), nossa Colors Business inaugurou seu novo laboratório analítico em Atul.
Bem equipada com os mais recentes instrumentos espectroscópicos, esta instalação de última geração aumentará a garantia de qualidade de corantes e pigmentos de alto desempenho oferecidos pela Atul.
Posted in Global Updates
October 2017: Visit us at AgroChemEx Shanghai, 2017
Atul will be participating at AgroChemEx Shanghai, 2017.
AgroChemEx is an annual agrochemical symposium and exhibition organised by the China Crop Protection Industry Association.
It provides a valuable platform for the exchange of information and business development opportunities by attracting over 600 exhibitors, specialising in technical, formulation and adjuvants.
When
October 15-17, 2017
Where
Booth 2F45, Shanghai World Expo Exhibition and Convention Center, China
Posted in CP Brand Updates
September 2017: Efficax – a premium product launched by Crop Care
Efficax, launched by Atul, is a super spreader surfactant for agriculture use with high penetration. Key features of this product are outlined below.
- 100% pure trisiloxane
- increases efficacy of crop care chemicals used
- improves spraying efficiency
- safe to use with all types of pesticides and plant growth nutrients (as a tank mix)
Dosage: 25 ml per 100 lt of spray volume; 50 ml per acre
Sizes available: 50 ml, 100 ml, 250 ml, 500 ml
Posted in CP Brand Updates
Setembro de 2017: Encontro Aquático Nacional em Atul Vidyalaya
A 21ª Associação de Escolas para o Certificado de Escola Indiana (ASISC) – Encontro Aquático Nacional, foi realizada entre 30 de setembro e 01º de outubro de 2017. O evento foi realizado pela quarta vez por Atul Vidyalaya sob o patrocínio da Atul Ltd. Entusiastas de natação de diferentes escolas da ASISC do país e do exterior fizeram do evento de dois dias um sucesso. Foram organizadas provas de estilo livre, nado peito, nado de costas e nado borboleta. Maharashtra foi declarado o vencedor da série.
Posted in Global Updates
Lapox ARL-135 | AH-332 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Product
Lapox ARL-135 | AH-333 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Product
19 de setembro de 2017: Visita de Sadhguru Jaggi Vasudev a Atul – Manifestação pelos rios
Junto com sua equipe, Sadhguru está viajando de Kanyakumari para o Himalaia, como parte do Rali pelos Rios, uma iniciativa para divulgar o esgotamento dos rios e uma necessidade urgente de salvá-los. Atul, localizada às margens do Rio Par, foi uma parada nesta jornada. Os estudantes de Atul Vidyalaya deram a Sadhguru uma recepção calorosa cantando o Nadi Stuti. Ele também plantou uma tamareira no campus da escola.
Posted in Global Updates
Lapox L-552 | K-552
Mixing ratio (Parts by weight) : 100 : 38 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 110 – 160 | Glass transition temperature (Tg) (o) : 115 – 130
Posted in PO PM Industry
Lapox ARD-57 (XR-104) | aerospace, aromatic-difunctional, aniline based reactive diluent, high performance composite
Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 8.15 – 9.50 | Viscosity @ 25oC (mPa s) : 100 – 200
Posted in PO PM Industry
Lapox P-3 (ARP-11) | Bisphenol-A based solid resins. Type 1, protective coating, enamels
Epoxy value (Eq/kg) : 2.15 – 2.22 | Viscosity @ 25oC (mPa s) : 160 – 190 | Softening point (oC) : 65 – 75 |
Posted in PO PM Industry
Lapox ARCH-13 | AH-215
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 70 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F
Posted in PO PM Industry
Lapox ARC-16 | AH-118 | ADP-11 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Pre-filled, Hot cure Indoor
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 80 : 0 – 8 | Glass transition temperature (Tg) (oC) : 105 – 115 | Thermal class : F
Posted in PO PM Industry
Lapox ARL-135 LV | AH-334 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-618 (K-5200) | Aromatic amine; long pot life; Elevated temperature curing curing agent; high glass transition temperature; high Tg
Appearance : Yellow to brown liquid | Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 100 – 300 | Amine value (mg KOH/g) : 628 – 634 | Mixing ratio (Parts by weight) : 24
Posted in PO PM Product
Lapox AH-315 | adhesives; casting; coating; composite applications; protective coatings; unmodified polyamine curing agent
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 15 | Pot life @ 25oC (hours) : 7 – 9 | Mixing ratio (Parts by weight) : 32
Posted in PO PM Product
Launching BOND 70 Pan India retailer scheme
2017 marks the 70th anniversary of Atul Ltd. The history of the Company is closely linked to that of independent India: both started their journey in 1947 and endeavour to consistently improve over the years. In light of this, Polymers Retail has rolled out a pan India retailer scheme ‘Bond 70’ on select Lapox, Polygrip and Lacare products for the period of July – October 2017.
The objective of this initiative is to encourage and motivate retailers as they continue to enjoy the positive impact of GST implementation. We express our gratitude for their continued support and patronage to our brands. To avail the benefits of this scheme, please write to support_polymers@atul.co.in or call on (+91) 96193 73700.
Posted in PO Retail Updates
Launching ‘Lacare’
Polymers Retail is launching a new range of maintenance products under the brand Lacare for automobile, industrial and household applications.
The upcoming product portfolio for this maintenance range is as follows:
|
Generic name |
Application |
|
Multi-purpose maintenance spray |
|
|
Channel spray |
|
Posted in PO Retail Updates
Pilot launch of retail module at Valsad
Polymers Retail had a pilot launch of its retail module from April-June 2017 in Valsad, Pardi and Udwada. While it has been challenging for the Business to move from a no presence zone to a significant presence zone, the experience has been a great motivation.
A summary of the post launch outcomes is as follows:
- Increase in market share from 1% to 19%
- Increase in sales by 1,300% in Q1, 2018 over the same period of last year
- Increase in coverage of outlets from 27 to 94 numbers
- Increase in brand visibility
We are also launching this model in other towns | cities of the country during 2017-18.
Posted in PO Retail Updates
Stall at ICERP – 2017
Polymers Performance Materials participated in ICERP 2017 in Mumbai. The exhibition was held on 10 – 12 January 2017. It gave us an opportunity to personally meet and discuss with the various personnel and decision makers of composites industry.
Posted in POPM Updates
Flame Awards Asia, 2016
Atul Ltd received a certificate of merit for its greening the desert project by Flame Awards Asia, 2016
Posted in Floras Updates
Wholesome, fresh and delicious Barhee Dates now available at Atul
These fresh Barhee dates are from Atul’s farms in the beautiful Thar desert in Rajasthan and farmer fields in various parts of India, cultivated with Atul’s tissue culture raised date palms.
Posted in Floras Updates
International Cropscience Conference and Exhibition
International Cropscience Conference and Exhibition
Posted in CP Bulk Updates
AgriBusiness Global – Trade Summit, Las Vegas, USA
AgriBusiness Global – Trade Summit, Las Vegas, USA
Posted in CP Bulk Updates
Launch of mobile application
Colors Business launched an innovative mobile application for effective customer service and was conferred with the Customer Excellence award.
Posted in Colors Updates
New machinery at Technical Services laboratory, Atul
Dr GVG Rao, President, Colors Business, inaugurated new machinery at the Technical Services (TS) laboratory, Atul. The TS laboratory focuses on customer support activities, particularly textile dyeing and printing application techniques.
Posted in Colors Updates
Seminar in Ethiopia
A representative from Colors Business participated in and conducted a technical seminar on ‘Selection, Evaluation, Application and Disposal of Dyes and Chemicals’ in Ethiopia. The seminar was organised by the Ethiopian Textile Industry Development Institute in twinning partnership with the Institute of Chemical Technology, India on April 21-22, 2017.
Posted in Colors Updates
Chemspec Europe – 2017, 31 May – 1 June 2017
Chemspec Europe – 2017, 31 May – 1 June 2017
Posted in Aromatics Updates
Maio de 2017: Atul – AkzoNobel joint venture
A AkzoNobel e a Atul anunciaram sua intenção de investir juntas na produção de ácido monocloroacético (MCA) na Índia. Isso incluirá a instalação de uma fábrica MCA de classe mundial no primeiro local de manufatura da Atul, localizada em Valsad (Gujarat). Cada parceira terá uma participação de 50%.
Essa parceria se baseará no status que a Atul tem como principal fornecedor global de 2,4-D, um herbicida que usa o MCA como matéria-prima essencial e na posição global líder que a AkzoNobel tem no mercado de MCA, com fábricas nos mercados da Holanda, China, Japão e EUA. O MCA é um componente essencial da indústria química e é usado em uma grande variedade de produtos químicos.
A parceria usará cloro e hidrogênio fabricados pela Atul para produzir o MCA, aproveitando a infraestrutura existente que já Atul possui e a principal tecnologia de hidrogenação ecológica fornecida pela AkzoNobel. A fábrica produzirá MCA suficiente para atender aos requisitos cativos de Atul, e a AkzoNobel comercializará o restante, principalmente na Índia.
Posted in Global Updates
Abril de 2017: A Atul declarou um “município sem dinheiro”
Por ocasião do festival Ambedkar Jayanti, o Primeiro-ministro Narendra Modi, sob o comando de Digi Dhan Vyapar Yojana, de Niti Aayog, declarou que o Município de Atul Ltd, em Valsad, está entre os setenta e cinco ‘municípios sem dinheiro’ da Índia, pois mais de 75% dos pagamentos foram processados de digitalmente, em vez de por dinheiro. Os municípios selecionados para o lançamento foram submetidos a uma avaliação independente por parte da Price Waterhouse Coopers (PWC), e estão incluídos nessa lista apenas os municípios que relataram que mais de 80% do número total de transações foram realizadas através de pagamento digital durante o período de revisão.
Posted in Global Updates
Março de 2017: A Atul inaugurou seu novo escritório em Thane
Escritório de Atul na repartição de Thane.
Posted in Global Updates
As tâmaras frescas de Barhee estão disponíveis para venda em Atul
As tâmaras frescas de Barhee são das fazendas de Atul no belo deserto de Thar, no Rajastão, e das plantações de várias partes da Índia, cultivadas com as palmeiras de tâmaras de cultura de tecidos de Atul.
Posted in Global Updates
2016-17: A Fundação Atul organizou exames otorrinolaringológicos, beneficiando 3.000 pacientes
Em 2016-17, a Fundação Atul organizou exames oftalmológicos e otorrinolaringológicos, beneficiando 3.103 pacientes em 10 aldeias, sendo que 129 foram operados por catarata e 551 receberam óculos.
Posted in Global Updates
Biopearl – Seaweed extract | Biopearl; Seaweed extract
A bio-stimulant derived from seaweed extract (Ascophyllum nodusum). The product is used as a plant growth stimulant, enhancing plant vigour at critical stages and improving crop productivity.
Posted in Crop Protection Brands
Efficax – Silicone super spreader | Efficax; Silicone; Super spreader
A silicone based surfactant used as a tank mix with and herbicides, insecticides and fungicides to improve its bio-efficacy.
Posted in Crop Protection Brands
Xyris Gold – Pendimethalin 38.7% CS | Xyris gold; Pendimethalin
A selective pre-emergence herbicide used to control most grasses and some broad-leaved weeds in various crops.
Posted in Crop Protection Brands
Xyris – Pendimethalin 30% EC | Xyris; Pendimethalin
A selective pre-emergence herbicide used to control most grasses and some broad-leaved weeds in various crops.
Posted in Crop Protection Brands
Ulmin – Atrazine 50% WP | Ulmin; Atrazine
A selective pre and early post-emergence herbicide of the Triazine group used to control a wide range of grasses and broad-leaved weeds in maize and sugarcane.
Posted in Crop Protection Brands
Photix – Bispyribac sodium 10% SC | Oryzae; Tricyclazole
A broad spectrum systemic post-emergence herbicide used to control grassy weeds such as Echinochloa spp, sedges and broad-leaved weeds in paddy.
Posted in Crop Protection Brands
Irio – Butachlor 50% EW | Irio; Butachlor
A selective, pre-emergence herbicide used to control most grasses and some broad-leaved weeds in transplanted paddy.
Posted in Crop Protection Brands
Cydus – Paraquat dichloride 24% SL | Cudus; Paraquat
A non-selective, post-emergence contact herbicide used to control annual grasses and broad-leaved weeds in tea, row crops and non-crop areas.
Posted in Crop Protection Brands
Oryzae – Tricyclazole 75% WP | Oryzae; Tricyclazole
A systemic insecticide with protective and curative action used to control blast in paddy.
Posted in Crop Protection Brands
Villo Gold – Sulphur 90% WDG | Villo gold; Sulphur
A sulphur based fertiliser for soil application used to overcome sulphur deficiencies and nutrition stress in plants and the soil.
Posted in Crop Protection Brands
Villo – Sulphur 80% WP | Villo; Sulphur
An inorganic contact fungicide with protective action and acaricidal activity. The product is recommended for controlling powdery mildews in various crops.
Posted in Crop Protection Brands
Mintho – Carbendazim 50% WP | Mintho; Carbendazim
A broad spectrum systemic fungicide of the Benzimidazole group used to control a range of diseases in various crops, with its protective and curative action.
Posted in Crop Protection Brands
Cantho – Copper oxychloride 50% WP | Cantho; COC; Copper oxychloride
A broad spectrum contact and protective fungicide and bactericide used to control wide range of fungal diseases in various crops.
Posted in Crop Protection Brands
Lypus – Imidacloprid 40% + Fipronil 40% WG | Lypus; Imida + Fipro; Imidacloprid + Fipronil
A systemic insecticide of the Neonicotinoid and Phenylpyrazole group with contact and stomach action. The product is used to control chewing and sucking insect pests.
Posted in Crop Protection Brands
Orax – Profenofos 50% EC | Orax; Profeno; Profenofos
A broad spectrum insecticide and acaricide of the Organophosphorus group used to control a range of chewing and sucking insects in various crops.
Posted in Crop Protection Brands
Galastar – Bifenthrin 10% EC | Galastar; Bifenthrin
A broad spectrum insecticide | miticide of the Synthetic pyrethroids group with contact and stomach action. The product is effective against a broad range of lepidopteran pests, sucking pests, mites and termites in various crops.
Posted in Crop Protection Brands
Balio – Chlorpyrifos 50% + Cypermethrin 5% EC | Balio; Chloro + Cyper; Chlorpyrifos + Cypermethrin
A non-systemic insecticide of Organophosphorus and Synthetic pyrethroids group with contact and stomach action. The product is used to control chewing and sucking insect pests.
Posted in Crop Protection Brands
Lapox Ultraquick
One-component, solvent free, nearly instant setting adhesive. The product is ideal for applications such as bonding of marble, glass, metal, plastic, wood, sun board and flex and filling gaps in PVC doors. Lapox Ultraquick is available in the pack size of 20 g.
Posted in Polymer Retail
Hexaconazole 5% EC | CAS No. 79983-71-4 | HS Code. 3808 92 90
A systemic fungicide that is used to control scab in apple, tikka leaf spot in groundnut, powdery mildew in mango and blast and sheath blight in rice.
Posted in Crop Protection Bulk Actives
Propiconazole technical 88% min | CAS No. 60207-90-1 | HS Code. 3808 92 90
A systemic fungicide of the Triazole group used to control fungal diseases. The product finds an application in wood preservation.
Posted in Crop Protection Bulk Actives
Lapox XR-110 | XH-68 | cable joints; composite adhesive
Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 25 – 35
Posted in PO PM Product
Lapox A-16 | AH-800 | rapid cure; similar substrate; dissimilar substrate; composite adhesive
Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 3 – 7
Posted in PO PM Product
Lapox ARCH-11 | K-3 | K-13 | industrial; filament winding and pultrusion; hot cure system; out door application; UV resistance
Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 105 – 115
Posted in PO PM Product
Lapox A-83 | K-83 | gap filling; standard adhesive; composite adhesive
Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 35 – 45
Posted in PO PM Product
Lapox B-11 | K-48 | construction; Maintenance; repair; crack-filling; quick setting
Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25
Posted in PO PM Product
Lapox B-47 | K-48 | construction; Maintenance; grouting; quick setting. excellent adhesion; good strength
Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25
Posted in PO PM Product
Lapox B-11 | K-49 | construction; Maintenance; chemical resistant flooring; protection of metal structures; protection from corrosive chemicals; protection from alkali; protection from solvents
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110
Posted in PO PM Product
Lapox B-11 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; variable potlife system; excellent acid and alkali resistance
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300
Posted in PO PM Product
Lapox ARPN-54 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; high viscosity system; variable pot life system; chemical resistance; industrial flooring
Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330
Posted in PO PM Product
Lapox ARPN-42 | AH-105 | construction; Maintenance; chemical resistant flooring; coal tar modified system; coating of pipes; vehile chassis; concrete structure
Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40
Posted in PO PM Product
Lapox B-47 | AH-416 | Maintenance; self-leveling system; low viscosity system; excellent gloss; excellent hardness; moderate chemical resistance
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Product
Lapox B-11 | AH-428 | Maintenance; self-leveling system; moderate viscosity system; excellent gloos; good chemical resistance; construction
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40
Posted in PO PM Product
Lapox ARB-26 | AH-416 | Maintenance; self-leveling system; low viscosity system; high gloss finish
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Product
Lapox ARB-22 | AH-428 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction
Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35
Posted in PO PM Product
Lapox ARB-22 | AH-416 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction
Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60
Posted in PO PM Product
Lapox B-47 | K-41 | K-42 | Maintenance; mortar; screed; varying pot life; excellent chemical resistance; construction
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330
Posted in PO PM Product
Lapox ARPN-54 | AH-351 | Maintenance; mortar; screed; fast reactive system; excellent chemical resistance; construction
Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 25 – 35
Posted in PO PM Product
Lapox B-47 | AH-714 | Maintenance; primer; low viscosity primer system; general application; construction
Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150
Posted in PO PM Product
Lapox B-47 | AH-713 | Maintenance; primer; faster curing; construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130
Posted in PO PM Product
Lapox B-47 | AH-546 | Maintenance; primer; standard system for extreme condition; moist surface; construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80
Posted in PO PM Product
Lapox B-11 | AH-543 | Maintenance; primer; very low temperature curing; curing in high humidity; moist surface; construction
Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Product
Lapox ARA-30 | AH-735 | structural adhesive; high lap shear strength; composite adhesive
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 35 – 50
Posted in PO PM Product
Lapox ARA-17 | AH-354 | toughness; quick; composite adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10
Posted in PO PM Product
Lapox ARL-140 | AH-419 | industrial; tooling; laminating system; high Tg; high glass transition temperature; dimensional stability
Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220
Posted in PO PM Product
Lapox ARL-138 | AH-339 | industrial; tooling; laminating system; standard tooling system; excellent Tg; excellent glass transition temperature
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Product
Lapox ART-24 | AH-326 | industrial; tooling; gel coat system; colourless gel coat system
Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115
Posted in PO PM Product
Lapox ART-23 | AH-326 | industrial; tooling; gel coat system; high hardness; high abrasion resistance; good finish
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox ART-22 | AH-326 | industrial; tooling; gel coat system; high thermal conductivity; excellent hardness; excellent surface finish
Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95
Posted in PO PM Product
Lapox ART-21 | AH-326 | industrial; tooling; gel coat system; general purpose
Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox L-552 | K-552 | industrial; RTM; hand lay-up and infusion system; low viscosity system; high Tg; high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 38 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 110 – 160 | Glass transition temperature (Tg) (oC) : 115 – 130
Posted in PO PM Product
Lapox ARTF-15 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 111,000 – 13,000
Posted in PO PM Industry
Cresol mixture | Phenol mixture
A cost effective substitute for cresylic acid and phenol.
Posted in Aromatics
TULACTV Navy CC | CAS No. Reactive Blue 250
An economical trichromatic navy dye with good dischargeability. The product is used to develop medium to dark shades.
Posted in Colors
TULACTIV Ultra Carmine CC
A deep red dye used for scarlet, dark red, brown and burgundy shades.
Posted in Colors
TULACTIV Ultra Red CC
A red dye with high tinctorial strength and excellent build-up properties. The product is used to develop medium to dark shades.
Posted in Colors
TULACTIV Ultra Yellow CC
A golden yellow dye with high tinctorial strength used to develop deep shades with good all round fastness properties.
Posted in Colors
TULACTIV Yellow CC
A basic trichromatic golden yellow dye with good dischargeability.
Posted in Colors
TULAREVS Blue LF-R
A blue dye with good light fastness properties used for pale to medium shades.
Posted in Colors
TULAREVS Red LF-2B
A red dye with good light fastness properties used for pale to medium shades.
Posted in Colors
TULAREVS Yellow LF-2R
A yellow dye with good light fastness properties used for pale to medium shades.
Posted in Colors
TULAREVS Black B Conc (133%) | CAS No. Reactive Black 5
An economical navy dye with good build-up properties.
Posted in Colors
TULACTIV Black RL | CAS No. Reactive Black 31
A black dye used to develop black to grey shades. The product has good light fastness properties.
Posted in Colors
TULACTIV Turquoise H2GP | CAS No. Reactive Blue 77
A turquoise dye with good build-up properties.
Posted in Colors
TULACTIV Turquoise G (90%) | CAS No. Reactive Blue 21 133
A turquoise dye with good build-up properties.
Posted in Colors
TULACTIV Blue R (100%) | CAS No. Reactive Blue 19
A brilliant reddish blue dye used to develop bright royal blue shades.
Posted in Colors
TULACTIV Blue BB | CAS No. Reactive Blue 220
A trichromatic blue dye with good fastness properties. The product has good dischargeability.
Posted in Colors
TULACTIV Violet 5R | CAS No. Reactive Violet 5
A bright violet dye used for various shades of violet.
Posted in Colors
TULACTIV Red BS | CAS No. Reactive Red 111
An economical bluish red dye used for medium and dark shades.
Posted in Colors
TULACTIV Red 5 B | CAS No. Reactive Red 35
An economical trichromatic red dye with high tinctorial strength.
Posted in Colors
TULACTIV Orange 3R | CAS No. Reactive Orange 16
A bright orange dye used for orange and scarlet shades.
Posted in Colors
TULACTIV Yellow RNL | CAS No. Reactive Yellow 107
An economical golden yellow dye used in trichromatic combinations.
Posted in Colors
TULACTIV Yellow R | CAS No. Reactive Orange 201
A bright yellow dye used in tertiary combinations with good light fastness properties.
Posted in Colors
TULACTIV Yellow FG | CAS No. Reactive Yellow 42
A yellow dye with all round fastness properties.
Posted in Colors
NOVATIC Grey 2305 MD
An ideal grey component with excellent performance in Exhaust and Continuous dyeing applications by Soft flow and Pad Dry Pad steam techniques. The product has good all round fastness properties. It is available in Microperle and Micro disperse varieties.
Posted in Colors
NOVATIC Navy DS MD
A navy dye with excellent build-up properties used for coloration of workwear and institutional wear. The product is used in combination with Yellow 3R and Jade Green XBN for Exhaust application. It shows minimum shade change when used with flame retardants. The product is available in Microperle and Micro disperse varieties.
Posted in Colors
Xantho – Hexaconazole 5% EC | Xantho; Hexaconazole
A systemic fungicide with protective and curative action used to control broad spectrum fungal diseases in various field crops and fruits.
Posted in Crop Protection Brands
Rugo – 2,4-D Ethyl Ester 38% EC | 2,4-D | 2,4-D Ethyl ester | Rugo
A selective and systemic post-emergence herbicide readily absorbed by leaves. The product is used to control annual and perennial broad-leaved weeds in a range of crops.
Posted in Crop Protection Brands
para Cresol (UHP- Ultra high purity) | CAS No. 106-44-5 | 4-Methylphenol; p-Hydroxytoluene; p-Methylphenol; 4-Hydroxytoluene
A high purity grade of para Cresol for niche applications.
Posted in Aromatics
para Cresol | CAS No. 106-44-5 | 4-Methylphenol; p-Hydroxytoluene; p-Methylphenol; 4-Hydroxytoluene
A starting ingredient in most versatile phenolic group antioxidants.
Posted in Aromatics
Ambrettolide | CAS No. 28645-51-4 | 9-Hexadecenoic acid; 16-hydroxy-; o-lactone; Oxacycloheptadec-10-en-2-one
A naturally sourced aroma ingredient with a musk-like profile.
Posted in Aromatics
Skatole | CAS No. 83-34-1 | 3-Methyl-1H indole; Beta-methyl indole; 3-Methyl-4; 5-benzopyrrole
A key ingredient in specialty fragrance formulations.
Posted in Aromatics
Phenyl acetic acid | CAS No. 103-82-2 | Phenylethanoic acid; 2-Phenylacetic acid; α-Toluic acid; Benzeneacetic acid
An intermediate widely used by the Pharmaceuticals and Crop Protection Chemicals industry.
Posted in Aromatics
para Anisyl propanal | CAS No. 5462-06-6 | Hydrocinnamaldehyde p-methoxy- α –methyl 4-Methoxy-α-Methylbenzenepropanal 3-(4-methoxyphenyl)-2-methylpropanal 2-Methyl-3-(4-methoxyphenyl)propanal
An aroma ingredient with sweet, floral, fennel and basil-like, mildly fruity odour. The product finds a major application in oral care products, flavours and fragrances.
Posted in Aromatics
para Methoxy phenyl acetic acid | CAS No. 104-01-8 | 4-Methoxybenzeneacetic acid; Homoanisic acid; p-Anisylacetic acid
A key building block for Dextromethorphan, a widely used formulation to treat cough and cold.
Posted in Aromatics
Lapox B-47 | AH-714 | Maintenance, primer , low viscosity primer system, general application, construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150
Posted in PO PM Industry
Lapox B-11 | AH-543 | Maintenance, primer , very low temperature curing, curing in high humidity, moist surface, construction
Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Industry
Lapox AH-725 | polyamide curing agent, bonding, fast reactivity
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 7,000 – 11,000 | Amine value (mg KOH/g) : 400 – 450 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) : 50
Posted in PO PM Industry
Lapox ARC-35 AH-676 | Electrical and Electronics, Electronics, Encapsulation, Pre-filled, “Hot cure Indoor”
Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 26 | Glass transition temperature (Tg) (oC) : 70 – 80 | Thermal class : F
Posted in PO PM Industry
Lapox ARC-30 | AH-714 | Electrical and Electronics, Vacuum potting, Pre-filled, “Cold cure Indoor”
Type of system : Pre-filled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B
Posted in PO PM Industry
Lapox ARL-111 | AH-358 | ARS-101
Type of system : Unfilled | Nature : Hot cure Indoor | Voltage class : MV / HV | Mixing ratio (parts by weight) : 100 : 15 | Glass transition temperature (Tg) (oC) : 80 – 90 | Thermal class : F
Posted in PO PM Industry
Lapox K-24 | Aromatic amine, curing agent, construction, composite, coatings
Appearance : Yellow liquid | Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 1,000 – 2,500 | Amine value (Eq/kg) : 8.00 – 9.00 | Mixing ratio (Parts by weight) : 34
Posted in None
Lapox ARC-31 | AH-114 | AC-13 | Electrical and Electronics, Dry type Distribution Transformer, Encapsulation, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.0 – 0.2 | Glass transition temperature (Tg) (oC) : 90 – 100 | Thermal class : F
Posted in PO PM Industry
Lapox ARD-58 | aromatic – monofunctional, reactive diluent, cardanol, coating, adhesives, electrical applications
Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 2.20 – 2.60 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 1.00
Posted in PO PM Industry
Lapox ARD-15 (K-513) | aromatic – monofunctional, reactive diluent, cardanol, coating, adhesives, electrical applications
Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 1.80 – 2.40 | Viscosity @ 25oC (mPa s) : 40 – 70 | HyCl (%) : Max 1.00
Posted in PO PM Industry
Lapox ARD-12 (XR-59) | aromatic – monofunctional, reactive diluent, p-tertiary butyl phenol, high chemical resistance, flooring
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.10 – 4.50 | Viscosity @ 25oC (mPa s) : 20 – 35 | HyCl (%) : Max 0.20
Posted in PO PM Industry
Lapox ARD-11 (K-103) | aromatic – monofunctional, reactive diluent, phenol, flooring, electrical application
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.90 – 6.30 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20
Posted in PO PM Industry
Lapox ARD-10 (K-100) | aromatic – monofunctional, reactive diluent, o-Cresol, high gloss, high mechanical strength, flooring, electrical application
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.30 – 6.00 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20
Posted in PO PM Industry
Lapox C-1 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F
Posted in PO PM Industry
Lapox C-59 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, Hot cure Indoor
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F
Posted in PO PM Industry
Lapox C-2 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoo | Mixing ratio (parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F
Posted in PO PM Industry
Lapox ARC-18 | AH-123 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Prefilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 122 – 132 | Thermal class : F
Posted in PO PM Industry
Lapox C-50 | K-225 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC) : 90 – 105 | Thermal class : H
Posted in PO PM Industry
Lapox C-50 | K-61 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC): 105 – 125 | Thermal class : H
Posted in PO PM Industry
Lapox C-17 | K-12 | K-13 | K-14 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 100 : 0.5 – 1.5 : 0 – 20 | Glass transition temperature (Tg) (oC): 85 – 95 | Thermal class : F
Posted in PO PM Industry
Lapox ARCH-12 | AH-215 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F
Posted in PO PM Industry
Lapox ARD-65 | aliphatic – trifunctional, reactive diluent, castor oil, concrete, flooring, thermal shock resistance
Colour (Gardner) : Max 6 | Epoxy value (Eq/kg) : 1.54 – 2.00 | Viscosity @ 25oC (mPa s) : 250 – 500
Posted in PO PM Industry
Lapox ARCH-12 | AH-214 | K-13 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 80 : 0.5 – 2.0 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F
Posted in PO PM Industry
Lapox ARCH-11 | AH-215 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 90 | Glass transition temperature (Tg) (oC): 100 – 110 | Thermal class : F
Posted in PO PM Industry
Lapox ARCH-11 | AH-214 | K-13 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 90 : 0.5 – 2.0 | Mix viscosity : 1,000/80 | Glass transition temperature (Tg) (oC): 100 – 110 | Thermal class : F
Posted in PO PM Industry
Lapox ARD-55 (XR-85) | aerospace, reactive diluent, aliphatic-trifunctional, Trimethylol propane based reactive diluent
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 25oC (mPa s) : 100 – 200 | HyCl (%) : Max 0.15
Posted in None
Lapox ARC-15 | AH-122 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Pre-filled, “Hot cure Indoor”
Type of system : Pre-filled | Nature : Hot cure Indoor | Mixing ratio (parts by weight) : 100 : 100 | Glass transition temperature (Tg) (oC) : 110 – 120 | Thermal class : H
Posted in PO PM Industry
Lapox ARD-56 (XR-87)
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.90 – 8.00 | Viscosity @ 25oC (mPa s) : 12 – 18 | HyCl (%) : Max 0.15
Posted in PO PM Industry
Lapox ARD-54 (XR-19)
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 2.90 – 3.20 | Viscosity @ 25oC (mPa s) : 40 – 90 | HyCl (%) : Max 0.15
Posted in PO PM Industry
Lapox ARD-52 (XR-86) | aliphatic – difunctional, reactive diluent, 1,6-hexane diol, aerospace
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 6.80 | Viscosity @ 25oC (mPa s) : 15 – 30 | HyCl (%) : Max 0.15
Posted in PO PM Industry
Lapox ARD-51 (K-77) | aliphatic – difunctional, reactive diluent, 1,4-butane diol
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 7.00 – 7.80 | Viscosity @ 25oC (mPa s) : 10 – 22 | HyCl (%) : Max 0.15
Posted in PO PM Industry
Lapox ARD-14 (XR-83) | aliphatic – monofunctional, reactive diluent, extreme low viscosity, construction, flooring
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 7.30 | Viscosity @ 25oC (mPa s) : Max 2 | HyCl (%) : Max 0.10
Posted in PO PM Industry
Lapox ARD-13 (XR-80) | aliphatic – monofunctional, reactive diluent, excellent wetting, excellent flexibility, flooring, coating
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 3.35 – 3.70 | Viscosity @ 25oC (mPa s) : 4 – 12 | HyCl (%) : Max 0.10
Posted in PO PM Industry
Lapox ARCH-11 (XR-34) | Cycloaliphatic resins, electrical casting, potting, UV resistance, outdoor coating
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.50 – 6.30 | Viscosity @ 25oC (mPa s) : 500 – 1,100
Posted in PO PM Industry
Lapox ARFM-14 (XR-106) | Bisphenol-A/F blends, solids coating, construction, floor coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.10 – 5.40 | Viscosity @ 25oC (mPa s) : 860 – 960
Posted in PO PM Industry
Lapox A-38 | K-99 | joints, moisture resistance, high adhesion, chemical resistant, construction adhesive
Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 20 – 25
Posted in PO PM Industry
Lapox ARPN-54 | K-41 | K-42 | Maintenance, mortar, screed, excellent chemical resistance, varying pot life, construction
Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330
Posted in PO PM Industry
Lapox ARL-135 LV | Bisphenol-A based modified liquid epoxy resin, FRP , composites
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,000 – 1,500
Posted in PO PM Industry
Lapox ARL-135 | Bisphenol-A based modified liquid epoxy resin, FRP , composites
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,700 – 2,500
Posted in PO PM Industry
Lapox B-11 | K-48 | construction, Maintenance, repair, crack-filling, quick setting
Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25
Posted in PO PM Industry
Lapox B-47 | K-48 | construction, Maintenance, grouting, quick setting, excellent adhesion, good strength
Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25
Posted in PO PM Industry
Lapox B-11 | K-49 | construction, Maintenance, chemical resistant flooring, protection of metal structure, protection from corrossive chemicals, protection from alkali, protection from solvents
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110
Posted in PO PM Industry
Lapox B-11 | K-41 | K-42 | construction, Maintenance, chemical resistant flooring, variable potlife system, excellent acid and alkali resistance
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300
Posted in PO PM Industry
Lapox ARPN-54 | AH-351 | Maintenance, mortar, screed, fast reactive system, excellent chemical resistance, construction
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 25 – 35
Posted in PO PM Industry
Lapox ARPN-42 | AH-105 | construction, Maintenance, chemical resistant flooring, coal tar modified system, coating of pipes, vehile chassis, concrete structure
Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40
Posted in PO PM Industry
Lapox B-47 | AH-416 | Maintenance, self-leveling system, low viscosity system, excellent gloss, excellent hardness, moderate chemical resistance
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Industry
Lapox B-11 | AH-428 | Maintenance, self-leveling system, moderate viscosity system, excellent gloos, good chemical resistance, construction
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40
Posted in PO PM Industry
Lapox ARB-26 | AH-416 | Maintenance, self-leveling system, low viscosity system, high gloss finish
Mixing ratio (Parts by weight) :100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Industry
Lapox ARB-22 | AH-428 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction
Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35
Posted in PO PM Industry
Lapox ARB-22 | AH-416 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction
Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60
Posted in PO PM Industry
Lapox B-47 | K-41 | K-42 | Maintenance, mortar, screed, varying pot life, excellent chemical resistance, construction
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330
Posted in PO PM Industry
Lapox B-47 | AH-713 | Maintenance, mortar, screed, standard system, system for extreme condition, screed lining, construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130
Posted in PO PM Industry
Lapox B-47 | AH-546 | Maintenance, mortar, screed, standard system, system for extreme condition, moist surface, construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80
Posted in PO PM Industry
Lapox ASH-11 | aerospace, curing agent, sulfone, 3,3′-Diaminodiphenyl sulfone, more reactive, fast curing, high productivity, powder
Chemistry : 3,3′-Diaminodiphenyl sulfone | Appearance : White to brownish white powder | Melting point (oC) : 167 – 175
Posted in None
Lapox ASH-10 MIC | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Micronised, micronised ASH-10, uniform dispersion in solvent-free resin, powder
Chemistry : 4,4′-Diaminodiphenyl sulfone Micronised | Appearance : White to off-white powder | Melting point (oC) : 176 – 180
Posted in None
Lapox ASH-10 FF | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Free Flow, Free flowin ASH-10, easy operation , easy handling, powder
Chemistry : 4,4′-Diaminodiphenyl sulfone Free Flow | Appearance : White to off-white powder | Melting point (oC) : 176 – 185
Posted in None
Lapox ASH-10 | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone, extremely slow reactivity, prepreg, advance composite, powder
Chemistry : 4,4′-Diaminodiphenyl sulfone | Appearance : White to off-white powder | Melting point (oC) : 176 – 185
Posted in None
Lapox AH-667
Chemistry : 4,4′-Diaminodiphenyl methane | Appearance : Viscous brownish liquid | Viscosity @ 60oC (mPa s) : 1,400 – 2,000
Posted in PO PM Industry
Lapox AH-618 (K-5200)
Appearance : Light yellow to brown liquid | Viscosity @ 25oC (mPa s) : 100 – 300
Posted in PO PM Industry
Lapox AH-442
Chemistry : 4,4′-Diaminodicyclohexyl methane | Appearance : Colourless transparent liquid | Melting point (oC) : 35 – 37
Posted in PO PM Industry
Lapox AH-422
Chemistry : 3,3’-Dimethyl-4,4’-diaminodicyclohexyl methane | Viscosity @ 25oC (mPa s) : 100 – 140
Posted in PO PM Industry
Lapox ARBMI-11 | aerospace, Bismaleimide resin, excellent thermal stability
Colour (Gardner) : Yellow powder | Melting point (oC) : 155 – 158
Posted in PO PM Industry
Lapox ARBZ-11 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability
Colour (Gardner) : Yellow solid | Viscosity @ 125oC (mPa s) : 50 – 500
Posted in PO PM Industry
Lapox ARBZ-10 A 75 | aerospace, benzoxazine resin, 75% solution in acetone
Colour (Gardner) : Yellowish liquid | Solid content (%) : 74 – 76 | Viscosity @ 25oC (mPa s) : 100 – 400
Posted in PO PM Industry
Lapox ARBZ-10 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability
Colour (Gardner) : Yellow solid | Viscosity @ 100oC (mPa s) : 1,000 – 7,000 | Softening point (oC) : 60 – 80
Posted in PO PM Industry
Lapox ARTF-50
Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 4.17 – 4.44 | Viscosity @ 85oC (mPa s) : 1,000 – 1,500
Posted in PO PM Industry
Lapox ARTF-38 | aerospace, multifunctional resin, distilled unmodified resin, m-amino phenol based, high performance
Epoxy value (Eq/kg) : 9.80 – 10.6 | Viscosity @ 25oC (mPa s) : 1,500 – 4,800
Posted in PO PM Industry
Lapox ARTF-37 | aerospace, multifunctional resin, unmodified resin, m-amino phenol based, high performance
Epoxy value (Eq/kg) : 9.10 – 9.80 | Viscosity @ 25oC (mPa s) : 7,000 – 13,000
Posted in PO PM Industry
Lapox ARTF-36 | aerospace, multifunctional resin, distilled unmodified resin, p-amino phenol based, high performance
Epoxy value (Eq/kg) : 9.40 – 10.50 | Viscosity @ 25oC (mPa s) : 550 – 850
Posted in PO PM Industry
Lapox ARTF-35 | aerospace, multifunctional resin, unmodified resin, p-amino phenol based, high performance
Epoxy value (Eq/kg) : 8.70 – 9.50 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000
Posted in PO PM Industry
Lapox ARTF-34 | aerospace, multifunctional resin, specialty resin, triphenol methane based, high performance
Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 5.88 – 6.66 | Viscosity @ 150oC (mPa s) : 30 – 55
Posted in PO PM Industry
Lapox ARTF-33 | aerospace, multifunctional resin, specialty resin, ethyl substituted MDA based, high performance
Colour (Gardner) : Max 7 | Epoxy value (Eq/kg) : 7.52 – 8.47 | Viscosity @ 25oC (mPa s) : 7,000 – 12,000
Posted in PO PM Industry
Lapox ARTF-23
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 8.55 – 9.00 | Viscosity @ 50oC (mPa s) : 3,000 – 6,000
Posted in PO PM Industry
Lapox ARTF-18 | aerospace, multifunctional resin, high viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000-19,000
Posted in PO PM Industry
Lapox ARTF-17 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 17,000-19,000
Posted in PO PM Industry
Lapox ARTF-16 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 13,000-15,000
Posted in PO PM Industry
Lapox ARTF-14 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 10,000 – 12,000
Posted in PO PM Industry
Lapox ARTF-13 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000 – 11,000
Posted in PO PM Industry
Lapox ARPN-56 | aerospace, Epoxy Phenol Novolac resin, solid resin, functionality of 5.6
Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.12 – 6.10 | Viscosity @ 50oC (mPa s) : 100 – 350
Posted in None
Lapox ARPN-25 | aerospace, Epoxy Phenol Novolac resin, low viscosity, average functionality, functionality of 2.5
Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.59 – 5.81 | Viscosity @ 52oC (mPa s) : 1,100 – 1,700
Posted in PO PM Industry
Lapox ARN-16 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, medium viscosity
Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 6.50 – 7.50 | Viscosity @ 50oC (mPa s) : 1,000 – 2,500 | Hycl : Max 0.20
Posted in PO PM Industry
Lapox ARL-15 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, low viscosity
Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,000
Posted in PO PM Industry
Lapox ARL-12 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.26 – 5.55 | Viscosity @ 25oC (mPa s) : 9,000 – 12,000
Posted in PO PM Industry
Lapox P-5 (ARP-17) | Bisphenol-A based solid resins, type 7, stoving lacquers, can coating, tube coating
Epoxy value (Eq/kg) : 0.53 – 0.59 | Viscosity @ 25oC (mPa s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120
Posted in PO PM Industry
Lapox K-541 (AH-541) | phenalkamine curing agent, high viscosity, marine coating, industrial coatings, protective coatings
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 15,000 – 35,000 | Amine value (mg KOH/g) : 290 – 325 | Pot life @ 25oC (minutes) : 40 – 85 | Mixing ratio (Parts by weight) : 70 | Thin film set time (8 mils) (hours) : 3 – 4
Posted in None
Lapox K-540 (AH-540) | phenalkamine curing agent, low viscosity, marine coatng, industrial coating, maintenance coating, protective coatings
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Amine value (mg KOH/g) : 490 – 550 | Pot life @ 25oC (minutes) : 30 – 55 | Mixing ratio (Parts by weight) : 40 | Thin film set time (8 mils) (hours) : 3 – 4
Posted in None
Lapox AH-543 (XH-80) | phenalkamine curing agent, low colour, low viscosity, heavy duty anti-corrosive coatings , marine applications, protective coatings
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Amine value (mg KOH/g) : 300 – 350 | Pot life @ 25oC (minutes) : 50 – 65 | Mixing ratio (Parts by weight) : 67 | Thin film set time (8 mils) (hours) : 4 – 5
Posted in PO PM Industry
Lapox AH-420 (K-964) | cycloaliphatic amine curing agent, very low viscosity, moderate pot life, flooring, better chemical resistance, protective coatings
Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight) : 48
Posted in PO PM Industry
Lapox AH-411 | unmodified cycloaliphatic amine curing agent, coatings, flooring applications, composite applications, protective coatings
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23
Posted in PO PM Industry
Lapox XH-61 (AH-321) | modified polyamine adduct solution, solution in xylene and butanol, clear coating, protective coating
Colour : Max 2 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000 | Amine value (Eq/kg) : 165 – 210 | Pot life @ 25oC (hours) : 4 – 6 | Mixing ratio (Parts by weight) : 30 (with resin P-101)
Posted in PO PM Industry
Lapox K-306 | Butylated melamine formaldehyde curing agent, enamel, polyester film coating, protective coating
Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)
Posted in PO PM Industry
Lapox K-105 | coal tar modified polyamine adduct, high build coatings, protective coating
Colour (Gardner) : Black | Viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : Min 20 | Mixing ratio (Parts by weight) : 100 (with resin ARB – 28)
Posted in PO PM Industry
Lapox K-54 (AH-356) | modified polyamine adduct, slids coating, mortar, adhesives, protective coating
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 2,900 – 3,600 | Amine value (mg KOH/g) : 398 – 415 | Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight) : 35
Posted in PO PM Industry
Lapox K-48 (AH-319) | modified polyamine curing agent, low vapour pressurehigh reactivity, adhesives, composites, castings, coatings, protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 200 – 300 | Amine value (Eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 18
Posted in PO PM Industry
Lapox K-7 | unmodified aliphatic polyamine curing agent, adhesives, castings, coatings, composites, protective coating
Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12
Posted in PO PM Industry
Lapox K-6 | unmodified aliphatic polyamine curing agent, casting, coatings, composites, protective coating
Colour (Gardner) : Max 3 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 10 – 12
Posted in PO PM Industry
Lapox AH-371 to AH-373 | modified polyamine curing agent, crack-filling, stone coating, mortar, adhesive, protective coating
Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : 100 – 550 | Amine value (mg KOH/g) : 500 – 1,000 | Pot life @ 25oC (minutes) : 5 – 30 | Mixing ratio (Parts by weight) : 18 – 25
Posted in PO PM Industry
Lapox AH-351 | modified polyamine curing agent, chemical resistance, sulphuric acid resistance, protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 25
Posted in PO PM Industry
Lapox AH-348 | unmodified aliphatic polyamine curing ag nr, flexible casting, transparent casting, coatings, protective coating
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) : 21
Posted in PO PM Industry
Lapox AH-341 | modified aliphatic polyamine curing agent, solids coating, long pot life, protective coating
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight) : 40
Posted in PO PM Industry
Lapox AH-313 | unmodified aliphatic polyamine curing agent, adhesives, casting, coating, composite applications, protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15
Posted in PO PM Industry
Lapox K-92 | Aromatic amine, ambient cure modified curing agent, chemical resistant coating, tank lining, flooring, protective coating
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 5,000 – 7,500 | Amine value (Eq/kg) : 4.40 – 5.10 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox ARL-143 | AH-335 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application
Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 85 – 95 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Industry
Lapox ARL-143 | AH-319 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application
Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Industry
Lapox ARCH-13 | Cycloaliphatic resins, higher toughness, outdoor coating, electrical casting, flooring, protective coating
Colour (APHA) : Max 100 | Epoxy value (Eq/kg) : 4.16 – 4.54 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000
Posted in PO PM Industry
Lapox ARF-15 | Bisphenol-F based resin, very low viscosity, distilled version, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 6.00 – 6.40 | Viscosity @ 25oC (mPa s) : 1,200 – 1,600
Posted in PO PM Industry
Lapox ARF-14 | Bisphenol-F based resin, high viscosity, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.30 | Viscosity @ 25oC (mPa s) : 5,000 – 7,000
Posted in None
Lapox ARF-13 | Bisphenol-F based resin, medium viscosity, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 3,300 – 4,100
Posted in None
Lapox ARF-12 | Bisphenol-F based resin, low viscosity, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 2,000 – 3,000
Posted in None
Lapox ARF-11 (XR-40) | standard Bisphenol-F based resin, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.70 – 6.30 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000
Posted in PO PM Industry
Lapox P-122 (ARP-14 A) | Bisphenol-A based solid resins, functional powder coating, rebar coating, protective coating
Epoxy value (Eq/kg) : 1.07 – 1.16 | Viscosity @ 25oC (mPa s) : 620 – 900 | Softening point (oC) : 100 – 110
Posted in None
Lapox P-62 (ARP-13) | Bisphenol-A based solid resins, standard solid resin, powder coating, protective coating
Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) : 95 – 101
Posted in PO PM Product
Lapox ARPN-36 | K-86 | industrial, prepregs and laminating systems, compressed laminate system, B-stage prepreg
Mixing ratio (Parts by weight) : 100 : 3-6 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 180
Posted in PO PM Industry
Lapox ARPN-36 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, very high Tg, very high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 32-40 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 170 – 185
Posted in PO PM Industry
Lapox L-247 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, general purpose system, fire retardant
Mixing ratio (Parts by weight) : 100 : 64 : 1-3 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox L-12 | K-24 | industrial, filament winding and pultrusion, hot cure system, low viscosity system, long pot life, high chemical resistance, high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 34 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 145 – 155
Posted in PO PM Industry
Lapox L-12 | K-12 K-13 | industrial, filament winding and pultrusion, hot cure system, standard system, fast reactivity
Mixing ratio (Parts by weight) : 100 : 100 : 1-3 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Industry
Lapox L-12 | AH-667 | industrial, filament winding and pultrusion, hot cure system, high chemical resistance, high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 27 | Mix viscosity @ 50oC (mPa s) : 3,000 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Industry
Lapox L-12 | AH-113 | K-13 | industrial, filament winding and pultrusion, hot cure system, flame retardancy
Mixing ratio (Parts by weight) : 100 : 95 : 0.5-2.0 | Mix viscosity @ 25oC (mPa s) : 1,900 – 2,100 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 185
Posted in PO PM Industry
Lapox ARL-136 | AH-126 | industrial, filament winding and pultrusion, hot cure system, superior fiber wetting, excellent mechanical properties, good surface finish
Mixing ratio (Parts by weight) : 100 : 90 | Mix viscosity @ 25oC (mPa s) : 300 – 600 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 125
Posted in PO PM Industry
Lapox ARF-11 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, non-crystallisable, excellent chemical resistance
Mixing ratio (Parts by weight) : 100 : 90 : 1-3 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 130
Posted in PO PM Industry
Lapox ARCH-11 | K-3 | K-13 | industrial, filament winding and pultrusion, hot cure system, out door application, UV resistance
Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 105 – 115
Posted in PO PM Industry
Lapox L-12 | AH-337 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) oC : 90 – 105
Posted in PO PM Industry
Lapox L-12 | AH-336 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) oC : 90 – 105
Posted in PO PM Industry
Lapox L-12 | AH-335 | industrial, filament winding and pultrusion, ambient cure system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) oC : 90 – 105
Posted in PO PM Industry
Lapox L-12 | AH-315 | industrial, filament winding and pultrusion, ambient cure system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 800 | Pot life @ 25oC (minutes) : 7 – 9 hr | Glass transition temperature (Tg) oC : 85 – 95
Posted in PO PM Industry
Lapox ARL-12 | AH-714 | industrial, filament winding and pultrusion, ambient cure system, superior adhesion, toughness
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 1,200 – 1,500 | Pot life @ 25oC (minutes) : 120 – 150 | Glass transition temperature (Tg) oC : 55 – 65
Posted in PO PM Industry
Lapox ARL-125 | AH-332 | aerospace, RTM, hand lay-up, infusion, long pot life, high Tg, high glass transition temperature
Mixing ratio (Parts by weight) : 100:32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ART-24 | AH-326 | automotive, tooling, gel coat system
Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115
Posted in PO PM Industry
Lapox ART-23 | AH-326 | automotive, tooling, gel coat system
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ART-21 | AH-326 | automotive, tooling, gel coat system
Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 LV | AH-411 | automotive, RTM, hand lay-up and infusion systems, very low viscosity, high Tg, high glass trransition temperature
Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (mPa s) : 250 – 400 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 125 – 135
Posted in PO PM Industry
Lapox ARL-135 LV | AH-333 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox B-7 | semi-solid, can coating, coil coating, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 3.57 – 4.45 | Viscosity @ 25oC (mPa s) : 450 – 800
Posted in None
Lapox ARL-135 LV | AH-332 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox P-10 (ARP-14 E) | Bisphenol-A based solid resins, esterifcation, anodic electrodeposition
Epoxy value (Eq/kg) : 1.08 – 1.18 | Viscosity @ 25oC (mPa s) : 430 – 550 | Softening point (oC) : 90 – 100
Posted in PO PM Industry
Lapox ARP-14 HF | Bisphenol-A based solid resins, modified resin, powder coating, better flow
Epoxy value (Eq/kg) : 1.23 – 1.33 | Viscosity @ 25oC (mPa s) : 480 – 580 | Softening point (oC) : 80 – 90
Posted in None
Lapox ARP-13 LV | Bisphenol-A based solid resins, hybrid powder coating
Epoxy value (Eq/kg) : 1.33 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 600 | Softening point (oC) : 95 – 101
Posted in None
Lapox ARL-160 | AH-359 | automotive, prepreg system, FRP structural component
Mixing ratio (Parts by weight) : 100 : 5 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox ARL-159 | AH-357 | AC-22 | automotive, prepreg system, hot melt prepreg system, very high Tg, very high glass transition temperature,
Mixing ratio (Parts by weight) : 100 : 15 : 2 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 155 – 165
Posted in PO PM Industry
Lapox L-68 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, FR-4 laminate
Mixing ratio (Parts by weight) : 100 : 32 : 1-3 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox L-67 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, G-10 laminate
Mixing ratio (Parts by weight) : 100 : 23 : 0.5-3.0 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox ARP-13 HT | Bisphenol-A based solid resins, powder coating
Epoxy value (Eq/kg) : 1.25 – 1.35 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 | Glass transition temperature (Tg) (oC) : 55
Posted in None
Lapox L-12 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, shelf life upto 6 month, G-11 laminate
Mixing ratio (Parts by weight) : 100 : 35 : 1-3 | Pot life @ 25oC (weeks) : 6 – 8 weeks | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Industry
Lapox ARP-12 | Bisphenol-A based solid resins, medium molecular weight, powder coating
Epoxy value (Eq/kg) : 1.42 – 1.53 | Viscosity @ 25oC (mPa s) : 375 – 475 | Softening point (oC) : 80 – 90
Posted in PO PM Industry
Lapox AC-14 (K-65) | accelerator and catalysts, liquid tertiary amine, accelerate anhydrides, accelerate polyamides, accelerate amines
Appearance : Clear yellow liquid | Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 580 – 635
Posted in PO PM Industry
Lapox L-12 | K-5 | automotive, prepregs and laminating systems, compressed laminate, prepreg, shorter shelf life, G-10 laminate, G-11 laminate
Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (hours) : > 4 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Industry
Lapox K-302 | modified polyamine, curing agent, self-leveling flooring, solvent-free coating, clear casting
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 300 – 600 | Amine value (mg KOH/g) : 260 – 310 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) : 50
Posted in PO PM Industry
Lapox AH-440 | Cycloaliphatic amine, curing agent, accelerated curing agent, solvent-free coating, flooring
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 335 – 375 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight) : 40
Posted in PO PM Industry
Lapox AH-428 | Cycloaliphatic amine, curing agent, low viscosity, fast reactivity, self-leveling, high gloss, colour stability
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 50 – 150 | Amine value (mg KOH/g) : 340 – 390 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 45
Posted in PO PM Industry
Lapox L-12 | K-918 | K-13 | automotive, filament winding and pultrusion system, hot cure
Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 600 – 900 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox AH-424 | Cycloaliphatic amine, curing agent, self-leveling flooring, high filler loading
Colour (Gardner) : Max 2 | Amine value (mg KOH/g) : 330 – 360 | Pot life @ 25oC (minutes) : 20 – 50 | Mixing ratio (Parts by weight) : 45
Posted in PO PM Industry
Lapox L-12 | AH-422 | automotive, filament winding and pultrusion system, long pot life, high glass transition temperature, high Tg, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 1,500 – 2,500 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox AH-416 | Cycloaliphatic amine, curing agent, moderate viscosity, transparent, high gloss, self-leveling flooring
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 400 – 600 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 30 – 45 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox AH-727 | curing agent, Polyamide, curing under wet/damp, excellent adhesion, adhesion with metal, adhesion with concrete, primer, coatings
Colour (Gardner) : Max 12 | Viscosity @ 25oC (mPa s) : 1,000 – 2,000 | Amine value (mg KOH/g) : 280 – 300 | Pot life @ 25oC (minutes) : 46 – 65 |
Mixing ratio (Parts by weight) : 60 (with resin B-47)
Posted in PO PM Industry
Lapox AH-716 (K-29) | curing agent, Polyamide, low viscosity, solids coating, primer, floor coating
Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa s) : 2,500 – 5,500 | Amine value (mg KOH/g) : 202 – 225 | Pot life @ 25oC (minutes) : 80 – 100 | Mixing ratio (Parts by weight) : 100
Posted in PO PM Industry
Lapox ARL-135 LV | AH-337 | automotive, filament winding and pultrusion system, low viscosity, variable pot life, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-714 | curing agent, Polyamide, low viscosity, grout, crack injection, primer, protective coating, tile gap filling, adhesive, mortar
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 425 – 450 | Pot life @ 25oC (minutes) : 120 – 130 | Mixing ratio (Parts by weight) : 50
Posted in PO PM Industry
Lapox ARL-135 LV | AH-336 | automotive, filament winding and pultrusion system, variable pot life, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-713 (K-46) | curing agent, Polyamide, moderate viscosity, solids coating, primer, grout, mortar, adhesive, marine coating, industrial paints
Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 12,000 – 18,000 | Amine value (mg KOH/g) : 350 – 400 | Pot life @ 25oC (minutes) : 60 – 80 | Mixing ratio (Parts by weight) : 50 – 55
Posted in PO PM Industry
Lapox ARL-135 LV | AH-335 | automotive, filament winding and pultrusion system, variable pot life, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-712 | curing agent, Polyamide, high viscosity, protective coating, adhesive, flooring, marine coating, industrial paint
Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 45,000 – 60,000 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 110 – 130 | Mixing ratio (Parts by weight) : 55 – 65
Posted in PO PM Industry
Lapox ART-22 | AH-326
Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95
Posted in PO PM Industry
Lapox ARL-140 | AH-419
Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220
Posted in PO PM Industry
Lapox ARL-138 | AH-417 | aerospace, tooling, laminating system, low viscosity system, high Tg, high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 100 – 110
Posted in PO PM Industry
Lapox AH-711 | curing agent, Polyamide, high viscosity, adhesive, sealant
Colour (Gardner) : Max 9 | Viscosity @ 40oC (mPa s) : 50,000 – 75,000 | Amine value (mg KOH/g) : 210 – 230 | Mixing ratio (Parts by weight) : 100 – 125
Posted in PO PM Industry
Lapox K-49 | Aromatic amine, low viscosity, moderate reactivity, solvent-free coating, chemical resistant coating, floorings, linings
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 700 – 900 | Amine value (Eq/kg) : 4.70 – 5.00 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox ARL-138 | AH-339 | aerospace, laminating system, high Tg, high glass transition temperature, dimensional stability at high temperature
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox K-42 | Aromatic amine, curing agent, low viscosity, high reactive
Appearance : Dark brown liquid | Colour (Gardner) : Max 16 | Viscosity @ 25oC (mPa s) : 15,000 – 21,000 | Amine value (Eq/kg) : 4.40 – 4.80 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox K-41 | Aromatic amine, curing agent, low viscosity, chemical resistant, industrial flooring, coatings, tank linings
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 3,800 – 5,800 | Amine value (Eq/kg) : 4.70 – 5.10 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox XR-128 | Solvent cut resins, high molecular weight, primer, enamel, flexibility
Epoxy value (Eq/kg) : Max 0.08 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Non-volatile content (%) : 49 – 51 (160oC/2h)
Posted in PO PM Industry
Lapox P-101 HV | Solvent cut resins, type 1 solution, paint and coatings
Epoxy value (Eq/kg) : 1.80 – 2.20 | Viscosity @ 25oC (mPa s) : 14,000 – 20,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)
Posted in PO PM Industry
Lapox P-101 | Solvent cut resins, type 1 solution, paint and coatings
Epoxy value (Eq/kg) : 1.90 – 2.20 | Viscosity @ 25oC (mPa s) : 9,000 – 13,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)
Posted in PO PM Industry
Lapox B-7 X 80 | Solvent cut resins, solids coating, excellent adhesion, gloss, flexibility
Epoxy value (Eq/kg) : 3.10 – 3.40 | Viscosity @ 25oC (mPa s) : 600 – 850 | Non-volatile content (%) : 79 – 81 (150oC/1h)
Posted in PO PM Industry
Lapox ARPN-54 | modified epoxy phenol novolac resins, composite applications, electrical applications, coating applications, industrial coating
Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.50 – 6.00 | Viscosity @ 25oC (mPa s) : 25,000 – 35,000
Posted in PO PM Industry
Lapox ARPN-36 X 80 | Epoxy phenol novolac resins, epoxy phenol novolac solution, chemical resistant coating, electrical applications, composite applications, industrial coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 800 – 1,500 | Non-volatile content (%) :79 – 81 (150oC/1h)
Posted in PO PM Industry
Lapox ARPN-36 M 80 | Epoxy phenol novolac resins, epoxy phenol novolac solution, chemical resistant coating, electrical applications, composite applications, industrial coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 150 – 350 | Non-volatile content (%): 79 – 81 (105oC/2h)
Posted in PO PM Industry
Lapox ARL-135 | AH-337 | aerospace, RTM, hand lay-up, infusion, low viscosity system, high Tg, high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 | AH-336
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 | AH-335
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 | AH-334 GL
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-135 | AH-333
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-135 | AH-332
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox L-12 | AH-411
Mixing ratio (Parts by weight) : 100 : 22 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 140 – 155
Posted in PO PM Industry
Lapox ARL-158 | AH-419
Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 170 – 200
Posted in PO PM Industry
Lapox ARL-135 LV | AH-422
Mixing ratio (Parts by weight) : 100 : 35 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox ARL-125 | AH-368
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 350 – 450 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-367 GL
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-365 GL
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-336
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-335
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-334
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-125 | AH-333
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry