Updates

Category: PO PM Product

Lapox 37% Formaldehyde | Construction; Formaldehyde; thermoset resin; chemical synthesis; 37% formaldehyde; Coatings

Appearance : Clear colourless solution | Formaldehyde content: 37 ± 0.50 | Methanol content: Max 5 | Specific gravity : 1.095 – 1.115 | pH : 2.80 – 5.00

Posted in PO PM Product

Lapox ARN-16 | bifunctional; Naphthalene based; structural adhesive; high performance

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 6.50 – 7.50 | Viscosity @ 50oC (mPa s) : 1,000 – 2,500 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARTF-39 | aerospace; multifunctional resin; distilled unmodified resin; m-amino phenol based; high performance

Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 150oC (mPa s) : 2,500 – 4,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-32 | aerospace; multifunctional resin; specialty resin; MDA based; high performance

Colour (Gardner) : Max 18 | Epoxy value (Eq/kg) : 7.40 – 8.50 | Viscosity @ 150oC (mPa s) : 2,000 – 4,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox AH-338 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 50 | Pot life @ 25oC : 600 min – 700 hr

Posted in PO PM Product

Lapox AH-337 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 50 | Pot life @ 25oC : 300 min – 380 hr

Posted in PO PM Product

Lapox AH-336 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 20 – 100 | Pot life @ 25oC : 80 min – 100 hr

Posted in PO PM Product

Lapox AH-335 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 20 – 100 | Pot life @ 25oC : 50 min – 60 hr

Posted in PO PM Product

Lapox AH-334 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 150 | Pot life @ 25oC : 25 min – 35 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-333 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 150-300 | Pot life @ 25oC : 14 min – 20 hr

Posted in PO PM Product

Lapox AH-332 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-311 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox ARL-135 | AH-332 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox ARL-135 | AH-333 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox AH-618 (K-5200) | Aromatic amine; long pot life; Elevated temperature curing curing agent; high glass transition temperature; high Tg

Appearance : Yellow to brown liquid | Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 100 – 300 | Amine value (mg KOH/g) : 628 – 634 | Mixing ratio (Parts by weight) : 24

Posted in PO PM Product

Lapox AH-315 | adhesives; casting; coating; composite applications; protective coatings; unmodified polyamine curing agent

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 15 | Pot life @ 25oC (hours) : 7 – 9 | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox XR-110 | XH-68 | cable joints; composite adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Product

Lapox A-16 | AH-800 | rapid cure; similar substrate; dissimilar substrate; composite adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 3 – 7

Posted in PO PM Product

Lapox ARCH-11 | K-3 | K-13 | industrial; filament winding and pultrusion; hot cure system; out door application; UV resistance

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 105 –

Posted in PO PM Product

Lapox A-83 | K-83 | gap filling; standard adhesive; composite adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 35 – 45

Posted in PO PM Product

Lapox B-11 | K-48 | construction; Maintenance; repair; crack-filling; quick setting

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Product

Lapox B-47 | K-48 | construction; Maintenance; grouting; quick setting. excellent adhesion; good strength

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Product

Lapox B-11 | K-49 | construction; Maintenance; chemical resistant flooring; protection of metal structures; protection from corrosive chemicals; protection from alkali; protection from solvents

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110

Posted in PO PM Product

Lapox B-11 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; variable potlife system; excellent acid and alkali resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300

Posted in PO PM Product

Lapox ARPN-54 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; high viscosity system; variable pot life system; chemical resistance; industrial flooring

Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330

Posted in PO PM Product

Lapox ARPN-42 | AH-105 | construction; Maintenance; chemical resistant flooring; coal tar modified system; coating of pipes; vehile chassis; concrete structure

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Product

Lapox B-47 | AH-416 | Maintenance; self-leveling system; low viscosity system; excellent gloss; excellent hardness; moderate chemical resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox B-11 | AH-428 | Maintenance; self-leveling system; moderate viscosity system; excellent gloos; good chemical resistance; construction

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Product

Lapox ARB-26 | AH-416 | Maintenance; self-leveling system; low viscosity system; high gloss finish

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox ARB-22 | AH-428 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction

Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35

Posted in PO PM Product

Lapox ARB-22 | AH-416 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction

Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60

Posted in PO PM Product

Lapox B-47 | K-41 | K-42 | Maintenance; mortar; screed; varying pot life; excellent chemical resistance; construction

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330

Posted in PO PM Product

Lapox ARPN-54 | AH-351 | Maintenance; mortar; screed; fast reactive system; excellent chemical resistance; construction

Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Product

Lapox B-47 | AH-714 | Maintenance; primer; low viscosity primer system; general application; construction

Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150

Posted in PO PM Product

Lapox B-47 | AH-713 | Maintenance; primer; faster curing; construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130

Posted in PO PM Product

Lapox B-47 | AH-546 | Maintenance; primer; standard system for extreme condition; moist surface; construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80

Posted in PO PM Product

Lapox B-11 | AH-543 | Maintenance; primer; very low temperature curing; curing in high humidity; moist surface; construction

Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox ARA-30 | AH-735 | structural adhesive; high lap shear strength; composite adhesive

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 35 – 50

Posted in PO PM Product

Lapox ARA-17 | AH-354 | toughness; quick; composite adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10

Posted in PO PM Product

Lapox ARL-140 | AH-419 | industrial; tooling; laminating system; high Tg; high glass transition temperature; dimensional stability

Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220

Posted in PO PM Product

Lapox ARL-138 | AH-339 | industrial; tooling; laminating system; standard tooling system; excellent Tg; excellent glass transition temperature

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Product

Lapox ART-24 | AH-326 | industrial; tooling; gel coat system; colourless gel coat system

Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115

Posted in PO PM Product

Lapox ART-23 | AH-326 | industrial; tooling; gel coat system; high hardness; high abrasion resistance; good finish

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ART-22 | AH-326 | industrial; tooling; gel coat system; high thermal conductivity; excellent hardness; excellent surface finish

Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95

Posted in PO PM Product

Lapox ART-21 | AH-326 | industrial; tooling; gel coat system; general purpose

Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox L-552 | K-552 | industrial; RTM; hand lay-up and infusion system; low viscosity system; high Tg; high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 38 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 110 – 160 | Glass transition temperature (Tg) (oC) : 115 – 130

Posted in PO PM Product

Lapox P-62 (ARP-13) | Bisphenol-A based solid resins, standard solid resin, powder coating, protective coating

Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) : 95 – 101

Posted in PO PM Product

Lapox ARL-143 | AH-335 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; varying pot life; fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Pot life @ 25oC (minutes) : 85 – 95 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Product

Lapox ARL-143 | AH-319 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; varying pot life; fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Product

Lapox ARL-135LV | AH-422 | industrial; RTM; hand lay-up and infusion systems; long pot life; high Tg; high glass trransition temperature

Mixing ratio (Parts by weight) : 100 : 35 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Product

Lapox ARL-135LV | AH-411 | industrial; RTM; hand lay-up and infusion systems; very low viscosity; high Tg; high glass trransition temperature

Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (mPa s) : 250 – 400 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 125 – 135

Posted in PO PM Product

Lapox ARL-135 LV | AH-334 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARL-135 LV | AH-333 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1,200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox ARL-135 LV | AH-332 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARL-135 | AH-337 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARL-135 | AH-336 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARL-135 | AH-335 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox AC-20 | accelerator and catalysts; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating

Appearance : Brown liquid or solid | Viscosity @ 25oC (mPa s) : Max 100 | Melting point (oC): 36 – 42

Posted in PO PM Product

Lapox ARL-135 | AH-334GL | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1,200 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox AC-19 | accelerator and catalysts; Liquid low reactive triamine; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating

Appearance : Clear liquid | Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 30

Posted in PO PM Product

Lapox ARL-125 | AH-367GL | industrial; RTM; hand lay-up and infusion systems; low viscosity system; vacuum technique; pressure bag technique

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox A-16 | AH-717 | marble; ceramic; metal; concrete; shock resistance; vibration resistant; construction adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 15,000 – 20,000 | Pot life @ 25oC (minutes) : 150 – 200

Posted in PO PM Product

Lapox ARL-125 | AH-365GL | industrial; RTM; hand lay-up and infusion systems; low viscosity system; vacuum technique; pressure bag technique; GL approved system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox AC-14 (K-65) | accelerator and catalysts; Liquid tertiary amine; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating

Appearance : Clear yellow liquid | Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 580 – 635

Posted in PO PM Product

Lapox AC-13 (K-13) | accelerator and catalysts; Liquid triamine; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating

Appearance : Clear liquid | Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : Max 10

Posted in PO PM Product

Lapox ARL-160 | AH-359 | industrial; prepreg; FRP; structural component

Mixing ratio (Parts by weight) : 100 : 5 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (oC) : 110 – 120

Posted in PO PM Product

Lapox ARL-160 | AH-357 | AC-22 | industrial; prepreg; hot melt system; structural component; infrastructure; general engineering application

Mixing ratio (Parts by weight) : 100 : 15 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (oC) : 110 – 120

Posted in PO PM Product

Lapox ASH-11 MIC | curing agent; 3,3’-Diaminodiphenyl sulfone Micronised; 3,3′-DDS

Chemistry : 3,3’-Diaminodiphenyl sulfone Micronised | Appearance : Off-white to yellowish brown powder | Melting point (oC) : 167 – 175 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10

Posted in PO PM Product

Lapox ASH-11 | curing agent; 3,3’-Diaminodiphenyl sulfone; 3,3′-DDS

Chemistry : 3,3’-Diaminodiphenyl sulfone | Appearance : White to brownish white powder | Melting point (oC) : 167 – 175 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10

Posted in PO PM Product

Lapox ARL-159 | AH-619 | industrial; prepreg; structural component; high temperature performance

Mixing ratio (Parts by weight) : 100 : 40 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (oC) : 180 – 200

Posted in PO PM Product

Lapox A-16 | K-5 | joints; hot cure; high temperature; construction adhesive

Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (minutes) : 170 – 190

Posted in PO PM Product

Lapox ASH-10 FF | curing agent; 4,4’-Diaminodiphenyl sulfone Free Flow; 4,4′-DDS

Chemistry : 4,4’-Diaminodiphenyl sulfone Free Flow | Appearance : White to off-white powder | Melting point (oC) : 176 – 185 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10

Posted in PO PM Product

Lapox ARL-159 | AH-357 | AC-22 | industrial; prepreg; hot melt system

Mixing ratio (Parts by weight) : 100 : 15 : 2 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 155 – 165

Posted in PO PM Product

Lapox ASH-10 MIC | curing agent; 4,4’-Diaminodiphenyl sulfone Micronised; 4,4′-DDS

Chemistry : 4,4’-Diaminodiphenyl sulfone Micronised | Appearance : White to off-white powder | Melting point (oC) : 176 – 180 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10

Posted in PO PM Product

Lapox L-68 | K-66 | K-13 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; FR-4 laminate

Mixing ratio (Parts by weight) : 100 : 32 : 1-3 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Product

Lapox ASH-10 | curing agent; 4,4’-Diaminodiphenyl sulfone; 4,4′-DDS

Chemistry : 4,4’-Diaminodiphenyl sulfone | Appearance : White to off-white powder | Melting point (oC) : 176 – 185 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10

Posted in PO PM Product

Lapox L-67 | K-66 | K-13 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; G-10 laminate

Mixing ratio (Parts by weight) : 100 : 23 : 0.5-3.0 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Product

Lapox AH-727 | Modified polyamide curing agent; curing agent for wet/damp condition; excellent adhesion with metal; excellent adhesion with concrete; flooring; primer

Colour (Gardner) : Max 12 | Viscosity @ 25oC (mPa s) : 1,000 – 2,000 | Amine value (mg KOH/g) : 280 – 300 | Pot life @ 25oC (minutes) : 46 – 65 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox A-16 | K-6 | marble; crack sealing; bonding; frames; construction adhesive

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 4,000 – 6,000 | Pot life @ 25oC (minutes) : 20 – 30

Posted in PO PM Product

Lapox AH-725 | polyamide curing agent; bonding; fast reactivity

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 7,000 – 11,000 | Amine value (mg KOH/g) : 400 – 450 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox L-12 | K-10 | K-86 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; shelf life upto 6 months; G-11 laminate

Mixing ratio (Parts by weight) : 100 : 35 : 1-3 | Pot life @ 25oC (weeks) : 6 – 8 | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Product

Lapox AH-716 (K-29) | polyamide curing agent; low viscosity; solids coating; primer; floor coatings; protective coatings

Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa s) : 2,500 – 5,500 | Amine value (mg KOH/g) : 202 – 225 | Pot life @ 25oC (minutes) : 80 – 100 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox L-12 | K-5 | industrial; prepregs and laminating systems; compressed laminate system; prepreg; shorter shelf life; G-10 laminate; G-11 laminate

Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (hours) : > 4 | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Product

Lapox AH-714 | polyamide curing agent; low viscosity; grouts; crack injection; primer; tile gap filling; mortar

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 425 – 450 | Pot life @ 25oC (minutes) : 120 – 130 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox ARPN-36 | K-86 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg

Mixing ratio (Parts by weight) : 100 : 3-6 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 180

Posted in PO PM Product

Lapox AH-713 (K-46) | polyamide curing agent; moderate viscosity; solids coating; primer; grouts; mortar; adhesives

Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 12,000 – 18,000 | Amine value (mg KOH/g) : 350 – 400 | Pot life @ 25oC (minutes) : 60 – 80 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox ARPN-36 | K-10 | K-86 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; very high Tg; very high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 32-40 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 170 – 185

Posted in PO PM Product

Lapox A-35 | K-35 | solvent based; excellent mechanical properties; construction adhesive

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 500 | Pot life @ 25oC (minutes) : > 60

Posted in PO PM Product

Lapox AH-712 | polyamide curing agent; high viscosity; adhesives; floorings; marine coatings; industrial paints; protective coatings

Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 45,000 – 60,000 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 110 – 130 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox L-247 | K-918 | K-13 | industrial; filament winding and pultrusion; hot cure system; general purpose system; fire retardant

Mix viscosity @ 25oC : 100 : 64 : 1-3 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Product

Lapox A-38 | K-99 | joints; moisture resistance; high adhesion; chemical resistant; construction adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 20 – 25

Posted in PO PM Product

Lapox AH-711 | polyamide curing agent; high viscosity; adhesives; sealants

Colour (Gardner) : Max 9 | Viscosity @ 40oC (mPa s) : 50,000 – 75,000 | Amine value (mg KOH/g) : 210 – 230 | Mixing ratio (Parts by weight) : 100 – 125

Posted in PO PM Product

Lapox L-12 | K-5200 | industrial; filament winding and pultrusion; hot cure system; low viscosity system; long pot life; high chemical resistance; high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (m Pas) : 4,000 – 6,000 | Pot life @ 25oC (days) : 2 – 3 | Glass transition temperature (Tg) (oC) : 180 – 190

Posted in PO PM Product

Lapox L-12 | K-918 | K-13 | industrial; filament winding and pultrusion; hot cure system; low viscosity; long pot life system; high chemical resistance; high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (m Pas) : 600 – 900 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 130 –

Posted in PO PM Product

Lapox A-53 | K-6 | marble; steel; metal; construction adhesive

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 30 – 60

Posted in PO PM Product

Lapox L-12 | K-24 | industrial; filament winding and pultrusion; hot cure system; low viscosity system, long pot life,high chemical resistance; high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 34 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 145 – 155

Posted in PO PM Product

Lapox L-12 | K-12 | K-13 | industrial; filament winding and pultrusion; hot cure system; standard system; fast reactivity

Mixing ratio (Parts by weight) : 100 : 100 : 1-3 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 95 –

Posted in PO PM Product

Lapox L-12 | AH-667 | industrial; filament winding and pultrusion; hot cure system; high chemical resistance; high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 27 | Mix viscosity @ 50oC (mPa s) : 3,000 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Product

Lapox A-555 | K-555 | toughness; quick; mechanical strength; construction; adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10

Posted in PO PM Product

Lapox L-12 | AH-113 | K-13 | industrial; filament winding and pultrusion; hot cure system; flame retardancy

Mixing ratio (Parts by weight) : 100 : 95 : 0.5-2.0 | Mix viscosity @ 25oC (mPa s) : 1,900 – 2,100 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 165 –

Posted in PO PM Product

Lapox ARA-12 | AH-718 | multi-purpose; zari; speaker; marble; ceramic; construction adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 32,000 – 37,000 | Pot life @ 25oC (minutes) : 90 – 105

Posted in PO PM Product

Lapox ARL-136 | AH-126 | industrial; filament winding and pultrusion; hot cure system; superior fiber wetting; excellent mechanical properties; good surface finish

Mixing ratio (Parts by weight) : 100 : 90 | Mix viscosity @ 25oC (mPa s) : 300 – 600 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 125

Posted in PO PM Product

Lapox AH-543 (XH-80) | low colour; low viscosity; phenalkamine curing agent; anti-corrosive coating; marine coating

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s): 2,000 – 5,000 | Amine value (mg KOH/g) : 300 – 350 | Pot life @ 25oC (minutes) : 50 – 65 | Mixing ratio (Parts by weight) :

Posted in PO PM Product

Lapox ARF-11 | K-918 | K-13 | industrial; filament winding and pultrusion; hot cure system; non-crystallisable; excellent chemical resistance

Mixing ratio (Parts by weight) : 100 : 90 : 1-3 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 –

Posted in PO PM Product

Lapox K-302 | modified polyamine; curing agent; self-leveling flooring; solvent-free coating; clear casting; protective coatings

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 300 – 600 | Amine value (mg KOH/g) : 260 – 310 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox L-12 | AH-422 | industrial; filament winding and pultrusion; ambient cure system; long pot life; high Tg; high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 1,500 – 2,500 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Product

Lapox L-12 | AH-411 | industrial; filament winding and pultrusion; ambient cure system; very high Tg; very high glass transition temperature; moderate viscosity

Mixing ratio (Parts by weight) : 100 : 22 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 140 – 155

Posted in PO PM Product

Lapox AH-440 | Cycloaliphatic amine; curing agent; accelerated curing agent; solvent-free coating; flooring; protective coatings

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 335 – 375 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox ARC-15 | AH-122 | Electrical and Electronics; Bushings; Conventional Vacuum Casting; Pre-filled; Hot cure Indoor

Type of system : Pre-filled | Nature : Hot cure / Indoor| Mixing ratio (Parts by weight) : 100 : 100 | Glass transition temperature (Tg) (oC) : 110 – 120 | Thermal class : H | Applications : Switchgears, Insulators, Bushings

Posted in PO PM Product

Lapox L-12 | AH-337 | industrial; filament winding and pultrusion; ambient cure system; high Tg; high glass transition temperature;variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 90 – 105

Posted in PO PM Product

Lapox AH-428 | Cycloaliphatic amine; curing agent;low viscosity;fast reactivity;self-leveling;high gloss;colour stability

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 50 – 150 | Amine value (mg KOH/g) : 340 – 390 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox L-12 | AH-336 | industrial; filament winding and pultrusion; ambient cure system; high Tg; high glass transition temperature; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 90 – 105

Posted in PO PM Product

Lapox ARC-16 | AH-118 | ADP-11

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 80 : 0 – 8 |  Glass transition temperature (Tg) (oC) : 105 – 115 | Thermal class : F | Applications : Switchgears, Insulators, Bushings, Instrument

Posted in PO PM Product

Lapox L-12 | AH-335 | industrial; filament winding and pultrusion; ambient cure system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 90 – 105

Posted in PO PM Product

Lapox AH-424 | Cycloaliphatic amine; curing agent; self-leveling flooring; high filler loading; protective coatings

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 20 – 50 | Amine value (mg KOH/g) : 330 – 360 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox L-12 | AH-315 | industrial; filament winding and pultrusion; ambient cure system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 800 | Pot life @ 25oC (hours) : 7 – 9 hr | Glass transition temperature (Tg) (oC) : 85 –

Posted in PO PM Product

Lapox AH-422 | Cycloaliphatic amine; unmodified low viscosity; curing agent; high Tg; high glass transition temperature; long pot life

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 100 – 140 | Pot life @ 25oC (minutes) : 200 – 250 | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox ARL-138 | AH-417 | industrial; filament winding and pultrusion; ambient cure system; high Tg; high glass transition temperature

Mix viscosity @ 25oC : 200 – 300 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 100 – 110

Posted in PO PM Product

Lapox ARCH-11 | AH-214 | K-13

Type of system : Unfilled | Nature : Hot cure Outdoor | Mixing ratio (Parts by weight) : 100 : 90 : 0.5 – 2.0 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F | Applications : Switchgears, Insulators, Bushings, Instrument

Posted in PO PM Product

Lapox ARL-135 LV | AH-337 | industrial; filament winding and pultrusion; ambient cure system; low viscosity resin system; variable pot life

Mix viscosity @ 25oC : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARCH-11 | AH-215

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight): 100 : 90 |  Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F | Applications : Switchgears, Insulators, Bushings, Instrument Transformers

Posted in PO PM Product

Lapox AH-420 (K-964) | Cycloaliphatic amine; very low viscosity; moderate pot life; protective coating; flooring; chemical resistance

Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Product

Lapox ARL-135LV | AH-336 | industrial; filament winding and pultrusion; ambient cure system; low viscosity resin system; variable pot life

Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARCH-12 | AH-214 | K-13

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 80 : 0.5 : 2.0 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class :

Posted in PO PM Product

Lapox AH-416 | Cycloaliphatic amine; moderate viscosity; transparent curing agent

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 400 – 600 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 30 – 45 | Mixing ratio (minutes) : 60

Posted in PO PM Product

Lapox ARL-135LV | AH-335 | industrial; filament winding and pultrusion; ambient cure system; low viscosity resin system; variable pot life

Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARCH-12 | AH-215

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 80 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F | Applications :

Posted in PO PM Product

Lapox AH-412 (K-552) | Cycloaliphatic amine; low viscosity curing agent; excellent mechanical properties

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 150 | Pot life @ 25oC (minutes) : 110 – 160 | Mixing ratio (Parts by weight) : 38

Posted in PO PM Product

Lapox AH-411 | unmodified cycloaliphatic amine curing agent; coatings; flooring applications; composite applications; protective coatings

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23

Posted in PO PM Product

Lapox ARCH-13 | AH-215

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 70 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F | Applications :

Posted in PO PM Product

Lapox ARL-12 | AH-714 | industrial; filament winding and pultrusion; ambient cure system; superior adhesion; toughness

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 1,200 – 1,500 | Pot life @ 25oC (minutes) : 120 – 150 | Glass transition temperature (Tg) (oC) : 55 – 65

Posted in PO PM Product

Lapox (AH-618) K-5200 | Aromatic amine; Elevated temperature curing curing agent; high Tg,high glass transition temperature;long pot life

Appearance : Yellow to brown liquid | Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 100 – 300 | Amine value (mg KOH/g) : 628 – 634 | Mixing ratio (Parts by weight) : 24

Posted in PO PM Product

Lapox K-450 | Aromatic amine; liquid curing agent; very low reactivity; composite

Appearance : Dark brown liquid (solidifies upon storage) | Viscosity @ 40oC (mPa s) : 250 – 400 | Amine value (mg KOH/g) : 430 – 450 | Mixing ratio (Parts by weight) : 34

Posted in PO PM Product

Lapox K-92 | Aromatic amine; ambient cure modified curing agent; chemical resistant coating; tank lining; flooring; protective coating

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 5,000 – 7,500 | Amine value (Eq/kg) : 4.40 – 5.10 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Product

Lapox C-17 | K-12 | K-13 | K-14

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.5 – 1.5 : 0 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95

Posted in PO PM Product

Lapox K-49 | Aromatic amine; low viscosity; moderate reactivity; solvent-free coating; chemical resistant coating; floorings; linings; curing agent; protective coating

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 700 – 900 | Amine value (Eq/kg) : 4.70 – 5.00 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Product

Lapox K-112 | accelerator and catalysts; Modified viscous tertiary amine;accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating

Appearance : Clear brown liquid | Viscosity @ 25oC (mPa s) : 1,000 – 1,800

Posted in PO PM Product

Lapox C-50 | K-61

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 80 | Glass transition temperature (Tg) (oC) : 105 – 125 | Thermal class : H | Applications :

Posted in PO PM Product

Lapox K-42 | Aromatic amine; curing agent; low viscosity; high reactive; protective coating

Appearance : Dark brown liquid | Colour (Gardner) : Max 16 | Viscosity @ 25oC (mPa s) : 15,000 – 21,000 | Amine value (Eq/kg) : 4.40 – 4.80 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Product

Lapox K-86 | accelerator and catalysts; Solid polyamine complex; accelerate aromatic amines

Appearance : White crystalline powder | Melting Point (oC) : Min 75

Posted in PO PM Product

Lapox C-50 | K-225

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 80 | Glass transition temperature (Tg) (oC) : 90 – 105 | Thermal class : H | Applications :

Posted in PO PM Product

Lapox K-41 | Aromatic amine; curing agent; low viscosity; chemical resistant; industrial flooring; coatings; tank linings; protective coating

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s): 3,800 – 5,800 | Amine value (Eq/kg) : 4.70 – 5.10| Mixing ratio (Parts by weight) : 60

Posted in PO PM Product

Lapox ARC-30 | AH-714

Type of system : Pre-filled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B | Applications :

Posted in PO PM Product

Lapox C-2 | K-1

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F | Applications :

Posted in PO PM Product

Lapox K-24 | Aromatic amine; curing agent; moderately reactive; construction; composite; coatings

Appearance : Yellow liquid | Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 1,000 – 2,500 | Amine value (eq/kg) : 8.00 – 9.00 | Mixing ratio (Parts by weight) : 34

Posted in PO PM Product

Lapox C-59 | K-1

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F | Applications :

Posted in PO PM Product

Lapox K-5 | Aromatic amine; curing agent; Pure 4,4′-diamino diphenyl methane; curing at elevated temperature

Appearance : White to tan pastilles | Mixing ratio (Parts by weight) : 26

Posted in PO PM Product

Lapox ARL-111 | AH-358 | ARS-101

Type of system : Unfilled | Nature : Hot cure Indoor | Mixing ratio (Parts by weight) : 100 : 15 | Glass transition temperature (Tg) (oC) : 80 – 90 | Thermal class : F | Applications : Paper

Posted in PO PM Product

Lapox AH-667 | Aromatic amine; curing agent; DDM based semi solid; composite

Appearance : Brown liquid | Colour (Gardner) : Max 12 | Viscosity @ 80oC (mPa s) : 80 – 120 | Mixing ratio (Parts by weight) : 28 |

Posted in PO PM Product

Lapox C-1 | K-1

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F | Applications :

Posted in PO PM Product

Lapox AH-664 | Aromatic amine; curing agent; viscous liquid; low reactivity; composite

Appearance : Dark brown liquid | Colour (Gardner): Max 12 | Viscosity @ 25oC (mPa s) : 3,500 – 6,500 | Amine value (mg KOH/g) : 430 – 470 | Mixing ratios (Parts by weight) : 34

Posted in PO PM Product

Lapox AH-657 | Aromatic amine;curing agent;modified low viscosity;high Tg;high glass transition temperature;filament winding;pultrusion;composite

Appearance : Dark brown liquid | Colour (Gardner): Max 18 | Viscosity @ 25oC (mPa s) : 9,000 – 14,000 | Amine value (mg KOH/g) : 555 – 625 | Mixing ratio (Parts by weight) : 27

Posted in PO PM Product

Lapox ARC-18 | AH-123

Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 122 – 132 | Thermal class : F | Applications :

Posted in PO PM Product

Lapox ARC-31 | AH-114 | AC-13

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.0 – 0.2 | Glass transition temperature (Tg) (oC) : 90 – 100 | Thermal class :

Posted in PO PM Product

Lapox ARC-35 | AH-676

Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 26 | Glass transition temperature (Tg) (oC) : 70 – 80 | Thermal class : F | Applications : Electronic assembly

Posted in PO PM Product

Lapox XH-61 (AH-321) | Modified polyamine adduct solution in xylene and butanol; clear coating

Colour: Max 2 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000 | Pot life @ 25oC (hours) : 4 – 6 | Mixing ratio (Parts by weight) : 30 (with resin P-101)

Posted in PO PM Product

Lapox K-306 | Butylated melamine formaldehyde curing agent; backing enamel; polyester film coating

Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)

Posted in PO PM Product

Lapox K-105 | Coal tar modified polyamine adduct; curing agent; high build coatings

Colour (Gardner) : Black | Viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 20 | Mixing ratio (Parts by weight) : 100 (with resin ARB-28)

Posted in PO PM Product

Lapox K-54 (AH-356) | Modified polyamine adduc; curing agent; high solids coating; mortar; adhesives

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 2,900 – 3,600 | Amine value (mg KOH/g) : 398 – 415  |Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight) : 35

Posted in PO PM Product

Lapox K-48 (AH-319) | Modified polyamine; curing agent; low vapour pressure; high reactivity; adhesive; casting; coating; composite

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 200 – 300 | Amine value (Eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 18

Posted in PO PM Product

Lapox K-7 | Unmodified aliphatic polyamine; curing agent; adhesive; casting; coating; composite

Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12

Posted in PO PM Product

Lapox K-6 | Unmodified aliphatic polyamine; curing agent; adhesive; casting; coating; composite

Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : – | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 10 – 12

Posted in PO PM Product

Lapox AH-371 to AH-373 | modified polyamine; curing agent; crack-filling; stone coating; mortar; adhesive

Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : 100 – 550 | Amine value (mg KOH/g) : 500 – 1,000 | Pot life @ 25oC (minutes) : 5 – 30 | Mixing ratio (Parts by weight) : 18-25

Posted in PO PM Product

Lapox AH-354 | aliphatic amine; curing agent; high viscosity; extremely fast reactvity; fast setting adhesive; putty

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 60,000 – 1,00,000 | Amine value (mg KOH/g) : 340 – 375 | Pot life @ 25oC (minutes) : 5 – 10 | Mixing ratio (Parts by weight) : 100

Posted in PO PM Product

Lapox AH-351 | modified polyamine curing agent; chemical resistance; sulphuric acid resistance; protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 25

Posted in PO PM Product

Lapox AH-350 | Modified polyamine adduct; curing agent; high reactivity; sealants; adhesives

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 3 – 4 | Mixing ratio (Parts by weight) : 40

Posted in PO PM Product

Lapox AH-348 | Unmodified aliphatic polyamine; curing agent; transparent casting; flexible casting; flexible coating

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5-10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) : 21

Posted in PO PM Product

Lapox AH-342 | Modified polyamine adduct; curing agent; high reactivity; sealants; adhesives

Colour (Gardner) : Yellow brown | Viscosity @ 25oC (mPa s) : 19,000 – 31,000 | Amine value (mg KOH/g) : 500 – 640 | Pot life @ 25oC (minutes) : 15 – 25 | Mixing ratio (Parts by weight) : 80

Posted in PO PM Product

Lapox AH-341 | modified aliphatic polyamine; high solids coating; long potlife; curing agent

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight) : 40

Posted in PO PM Product

Lapox AH-313 | unmodified aliphatic polyamine curing agent; adhesives; casting; coating; composite applications; protective coating

Colour (Gardner) : Max 4 |  Viscosity @ 25oC (mPa s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15

Posted in PO PM Product

Lapox ARD-57 (XR-104) | aromatic – difunctional; reactive diluent; aniline; high performance composites

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 8.15 – 9.50 | Viscosity @ 25oC (mPa s) : 100 – 200

Posted in PO PM Product

Lapox ARD-58 | aromatic – monofunctional; reactive diluent; cardanol; coating; adhesives; electrical applications

Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 2.20 – 2.60 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 1.00

Posted in PO PM Product

Lapox ARD-15 (K-513) | aromatic – monofunctional; reactive diluent; cardanol; coating; adhesives; electrical applications

Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 1.80 – 2.40 | Viscosity @ 25oC (mPa s) : 40 – 70 | HyCl (%) : Max 1.00

Posted in PO PM Product

Lapox ARD-12 (XR-59) | aromatic – monofunctional; reactive diluent; p-tertiary butyl phenol; high chemical resistance; flooring

Colour (Gardner) :  Max 2| Epoxy value (Eq/kg) : 4.10 – 4.50 | Viscosity @ 25oC (mPa s) : 20 – 35 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARD-11 (K-103) | aromatic – monofunctional; reactive diluent; phenol; flooring; electrical application

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.90 – 6.30 | Viscosity @ 25oC (mPa s) : 6-8 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARD-10 (K-100) | aromatic – monofunctional; reactive diluent; o-Cresol; high gloss; high mechanical strength; flooring; electrical application

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.30 – 6.00 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARD-65 | aliphatic – trifunctional; reactive diluent; castor oil ; concrete; flooring; thermal shock resistance

Colour (Gardner) : Max 6 | Epoxy value (Eq/kg) : 1.54 – 2.00 | Viscosity @ 25oC (mPa s) : 250 – 500

Posted in PO PM Product

Lapox ARD-55 (XR-85) | aliphatic – trifunctional; reactive diluent; trimethylol propane; composite; coatings

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 25oC (mPa s) : 100 – 200

Posted in PO PM Product

Lapox ARD-60 | aliphatic – difunctional; reactive diluent; 1,4-butane diol; composite application

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 8.00 – 9.00 | Viscosity @ 25oC (mPa s) : 15 – 22 | HyCl (%) : Max 0.15

Posted in PO PM Product

Lapox ARD-59 | aliphatic – difunctional; reactive diluent; dipropylene glycol; composite application

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 6.20 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARD-56 (XR-87) | aliphatic – difunctional; reactive diluent; neopentyl glycol; coating applications; construction; composites

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.90 – 8.00 | Viscosity @ 25oC (mPa s) : 12 – 18 | HyCl (%) : Max 0.15

Posted in PO PM Product

Lapox ARD-54 (XR-19) | aliphatic – difunctional; reactive diluent; polypropylene glycol

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 2.90 – 3.20 | Viscosity @ 25oC (mPa s) : 40 – 90 | HyCl (%) : Max 0.15

Posted in PO PM Product

Lapox ARD-52 (XR-86) | aliphatic – difunctional; reactive diluent; 1,6-hexane diol; coating applications

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 6.80 | Viscosity @ 25oC (mPa s) : 15 – 30 | HyCl (%) : Max 0.15

Posted in PO PM Product

Lapox ARD-51 (K-77) | aliphatic – difunctional; reactive diluent; 1,4-butane diol

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 7.00 – 7.80 | Viscosity @ 25oC (mPa s) : 10 – 22 | HyCl (%) : Max 0.15

Posted in PO PM Product

Lapox ARD-14 (XR-83) | aliphatic – monofunctional; reactive diluent; extreme low viscosity; construction; flooring

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 7.30 | Viscosity @ 25oC (mPa s) : Max 2 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARD-13 (XR-80) | aliphatic – monofunctional; reactive diluent; excellent wetting; excellent flexibility; flooring; coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 3.35 – 3.70 | Viscosity @ 25oC (mPa s) : 4 – 12  | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-50 | multifunctional resin; dicyclopentadiene; aerospace; composite; electrical applications; excellent moisture resistance; high thermal stability; low dielectric constant

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 4.17 – 4.44 | Viscosity @ 85oC (mPa s) : 1,000 – 1,500 | HyCl (%) : Max 0.05

Posted in PO PM Product

Lapox ARTF-34 | trifunctional resin; triphenol methane; aerospace; high performance composites; electrical applications; electronic applications

Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 5.88 – 6.66 | Viscosity @ 150oC (mPa s) : 30 – 55 | HyCl (%) : Max 0.05

Posted in PO PM Product

Lapox ARF-15 | pure viscous Bisphenol-F resin

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 6.00 – 6.40 | Viscosity @ 25oC (mPa s) : 1,200 – 1,600

Posted in PO PM Product

Lapox ARC-28 | Bisphenol-A based resin; electrical machine; impregnation; aerospace

Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,500 | HyCl (%) : Max 0.03

Posted in PO PM Product

Lapox ARBZ-11 | aerospace; benzoxazine resin; excellent moisture resistance; low shrinkage; moderate flammability

Colour (Gardner) : Yellow solid | Softening Point (oC) : 60 – 80  | Viscosity @ 125oC (mPa s) : 50 – 500  | Gel Time (sec) : 250 – 550 sec @ 220oC

Posted in PO PM Product

Lapox ARBZ-10 A 75 | aerospace; benzoxazine resin; 75% solution in acetone

Colour (Gardner) : Yellowish liquid | Solid content (%) : 74 – 76  | Viscosity @ 25oC (mPa s) : 100 – 400 | Gel Time (%) : 380 – 420 sec @ 220oC

Posted in PO PM Product

Lapox ARBZ-10 | aerospace; benzoxazine resin; excellent moisture resistance; low shrinkage; moderate flammability

Colour (Gardner) : Yellow solid | Softening Point (oC) : 60 – 80  | Viscosity @ 100oC (mPa s) : 1,000 – 7,000   | Gel Time (sec) :  200 – 450 sec @ 220oC

Posted in PO PM Product

Lapox ARBMI-11 | aerospace; Bismaleimide resin; excellent thermal stability

Colour (Gardner) : Yellow powder | Melting Point (oC) : 155 – 158 | HyCl (%) : Acid value: <1

Posted in PO PM Product

Lapox ARTF-38 | aerospace; multifunctional resin; distilled unmodified resin; m-amino phenol based; high performance

Epoxy value (Eq/kg) : 9.80 – 10.6 | Viscosity @ 25oC (mPa s) : 1,500 – 4,800 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARTF-37 | aerospace; multifunctional resin; unmodified resin; m-amino phenol based; high performance

Epoxy value (Eq/kg) : 9.10 – 9.80 | Viscosity @ 25oC (mPa s) : 7,000 – 13,000 | HyCl (%) : Max 0.30

Posted in PO PM Product

Lapox ARTF-36 | aerospace; multifunctional resin; distilled unmodified resin; p-amino phenol based; high performance

Epoxy value (Eq/kg) : 9.40 – 10.50 | Viscosity @ 25oC (mPa s) : 550 – 850 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARTF-35 | aerospace; multifunctional resin; unmodified resin; p-amino phenol based; high performance

Epoxy value (Eq/kg) : 8.70 – 9.50 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | HyCl (%) : Max 0.30

Posted in PO PM Product

Lapox ARTF-33 (XR-93) | aerospace; multifunctional resin; specialty resin; ethyl substituted MDA base; high performance

Colour (Gardner) : Max 7 | Epoxy value (Eq/kg) : 7.52 – 8.47 | Viscosity @ 25oC (mPa s) : 7,000 – 12,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-23 (XR-23) | aerospace; multifunctional resin; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 8.55 – 9.00 | Viscosity @ 50oC (mPa s) : 3,000 – 6,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-18 | aerospace; multifunctional resin; general purpose; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000 – 19,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-17 | aerospace; multifunctional resin; high viscosity; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 17,000 – 19,000  | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-16 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 13,000 – 15,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-15 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 11,000 – 13,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-14 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 10,000 – 12,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-13 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000 – 11,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARPN-56 | Epoxy phenol novolac resins; solid resin; electronic moulding compounds

Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.12 – 6.10 | Viscosity @ 150oC (mPa s) : 100 – 350

Posted in PO PM Product

Lapox ARPN-54 | modified epoxy phenol novolac resins; composite applications; electrical applications; coating applications; protective coating

Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.50 – 6.00 | Viscosity @ 25oC (mPa s) : 25,000 – 35,000

Posted in PO PM Product

Lapox ARPN-36 X 80 | Epoxy phenol novolac resins; epoxy phenol novolac solution; chemical resistant coating; electrical applications; composite applications; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 800 – 1,500 | Non-volatile content (%) : 79 – 81 (150oC/1h)

Posted in PO PM Product

Lapox ARPN-36 M 80 | Epoxy phenol novolac resins; epoxy phenol novolac solution; chemical resistant coating; electrical applications; composite applications; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 150 – 350 | Non-volatile content (%) : 79 – 81 (105oC/2h)

Posted in PO PM Product

Lapox ARPN-36 (L-238) | Epoxy phenol novolac resins; semi-solid; composites; electrical, chemical resistant coating; floorings; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.70 | Viscosity @ 52oC (mPa s) : 20,000 – 50,000 

Posted in PO PM Product

Lapox ARPN-25 | Epoxy phenol novolac resins; aerospace; low viscosity; average functionality; functionality of 2.5

Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.59 – 5.81 | Viscosity @ 52oC (mPa s) : 1,100 – 1,700

Posted in PO PM Product

Lapox A-31 AH-717 | standard adhesive; composite adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 25,000 – 40,000 | Pot life @ 25oC (minutes) : 130 – 150

Posted in PO PM Product

Lapox ARCH-13 | Cycloaliphatic resins; higher toughness; outdoor coating; electrical casting; flooring; protective coating; UV resistance

Colour (APHA) : Max 100 | Epoxy value (Eq/kg) : 4.16 – 4.54 | Viscosity @ 25oC (mPa s) : 2000 – 4000

Posted in PO PM Product

Lapox ARCH-12 | Cycloaliphatic resins; modified resin; low viscosity; thermal shock resistance; electrical casting; protective coating; UV resistance

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.55 | Viscosity @ 25oC (mPa s) : 350 – 750

Posted in PO PM Product

Lapox ARCH-11 (XR-34) | Cycloaliphatic resins; electrical casting; potting; UV resistance; outdoor coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.50 – 6.30 | Viscosity @ 25oC (mPa s) : 500 – 1,100

Posted in PO PM Product

Lapox XR-128 | Solvent cut resins; polyester film coating; high molecular weight epoxy solution; primer; enamel; coating high flexibility

Epoxy value (Eq/kg) : Max 0.08 | Viscosity @ 25oC (mPa s) :  2,000 – 5,000 | Non-volatile content (%) : 49 – 51 (160oC/2h)

Posted in PO PM Product

Lapox XR-10 | Solvent cut resins; polyester film coating

Viscosity @ 25oC (mPa s) : 150 – 350 | Non-volatile content (%) : 48 – 52 (120oC/2h)

Posted in PO PM Product

Lapox C-51 | K-6

Type of system : Unfilled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 10 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B | Applications :

Posted in PO PM Product

Lapox P-101 HV | Solvent cut resins; type 1; resin solution in xylene; paint and coatings; protective coating

Epoxy value (Eq/kg) : 1.80 – 2.20 | Viscosity @ 25oC (mPa s) : 14,000 – 20,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)

Posted in PO PM Product

Lapox P-101 | Solvent cut resins; type 1; resin solution in xylene; paint and coatings; protective coating

Epoxy value (Eq/kg) : 1.90 – 2.20 | Viscosity @ 25oC (mPa s) : 9,000 – 13,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)

Posted in PO PM Product

Lapox L-68 | Solvent cut resins; brominated resin solution; solution in methyl ethyl ketone; FR-4 laminates; fire retardant

Epoxy value (Eq/kg) : 2.00 – 2.22 | Viscosity @ 25oC (mPa s) : 2,200 – 3,000 | Non-volatile content (%) :79 – 81 (105C/2h)

Posted in PO PM Product

Lapox B-7 X 80 | Solvent cut resins; solids coating; excellent adhesion; high gloss; flexibility

Epoxy value (Eq/kg) : 3.10 – 3.40 | Viscosity @ 25oC (mPa s) : 600 – 850 | Non-volatile content (%) : 79 – 81 (150oC/1h)

Posted in PO PM Product

Lapox ARL-154 | Solvent cut resins; polyester film coating

Viscosity @ 25oC (mPa s) : 50 – 350 | Non-volatile content (%) : 50 – 55 (120oC/2h)

Posted in PO PM Product

Lapox ARL-148 | Solvent cut resins;polyester film coating

Viscosity @ 25oC (mPa s) : 50 – 350 | Non-volatile content (%) : 48 – 52 (120oC/2h)

Posted in PO PM Product

Lapox ARFM-14 (XR-106) | Bisphenol-A/F blends;solids coating;construction;floor coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.10 – 5.40 | Viscosity @ 25oC (mPa s) : 860 – 960

Posted in PO PM Product

Lapox ARFM-13 (XR-60) | Bisphenol-A/F blends ;low viscosity;coating;composites;floor coating;construction

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.75 | Viscosity @ 25oC (mPa s) : 4,500 – 6,500

Posted in PO PM Product

Lapox ARFM-12 (XR-123) | Bisphenol-A/F blends; Medium viscosity; coating; composites; floor coating; construction

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.55 – 5.80 | Viscosity @ 25oC (mPas) : 6,500 – 8,500

Posted in PO PM Product

Lapox ARF-14 | Bisphenol-F based resin; high viscosity; constructon; composites; electrical; casting; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.30  | Viscosity @ 25oC (mPa s) : 5,000 – 7,000

Posted in PO PM Product

Lapox ARF-13 | Bisphenol-F based resin; medium viscosity; constructon; composites; electrical; casting; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 3,300 – 4,100

Posted in PO PM Product

Lapox ARF-12 | Bisphenol-F based resin; low viscosity; constructon; composites; electrical; casting; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 2,000 – 3,000

Posted in PO PM Product

Lapox ARF-11 (XR-40) | standard Bisphenol-F based resin; construction; composites; electrical; casting; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.70 – 6.30 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000

Posted in PO PM Product

Lapox P-122 (ARP-14 A) | Bisphenol-A based solid resins;functional powder coatin;rebar coating; protective coating

Epoxy value (Eq/kg) : 1.07 – 1.16 | Viscosity @ 25oC (mPa s) : 620 – 900 | Softening point (oC) : 100 – 110

Posted in PO PM Product

Lapox P-62 (ARP-13) | Bisphenol-A based solid resins; standard solid resin; powder coating; protective coating

Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) :95 – 101

Posted in PO PM Product

Lapox P-10 (ARP-14 E) | Bisphenol-A based solid resins, esterifcation, anodic electrodeposition, protective coating

Epoxy value (Eq/kg) : 1.08 – 1.18 | Viscosity @ 25oC (mPa s) : 430 – 550  | Softening point (oC) : 90 – 100

Posted in PO PM Product

Lapox P-6 (ARP-19) | Bisphenol-A based solid resins; type 9; can coating; coil coating

Epoxy value (Eq/kg) :0.34 – 0.42 | Viscosity @ 25oC (mPa s) :5,000 – 10,000 | Softening point (oC) :125 – 140

Posted in PO PM Product

Lapox P-5 (ARP-17) | type 7; stoving lacquers; can coating; tube coating; Bisphenol-A based solid resins

Epoxy value (Eq/kg) : 0.53 – 0.59 | Viscosity @ 25oC (mPa s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120

Posted in PO PM Product

Lapox P-4 (ARP-14) | Bisphenol-A based solid resins; type 4; enamels; can coating; tube coating

Epoxy value (Eq/kg) : 1.12 – 1.20 | Viscosity @ 25oC (mPa s) : 550 – 700 | Softening point (oC) : 90 – 102

Posted in PO PM Product

Lapox P-3 (ARP-11) | Bisphenol-A based solid resins; type 4; esterification; enamels; exterior coating of can; tube coating; protective coating

Epoxy value (Eq/kg) : 2.15 – 2.22 | Viscosity @ 25oC (mPa s) : 160 – 190 | Softening point (oC) : 65 – 75

Posted in PO PM Product

Lapox ARP-14 HF | Bisphenol-A based solid resins; modified resin; powder coating; better flow; protective coating

Epoxy value (Eq/kg) : 1.23 – 1.33 | Viscosity @ 25oC (mPa s) : 480 – 580 | Softening point (oC) : 80 – 90

Posted in PO PM Product

Lapox ARP-13 HT | Bisphenol-A based solid resins; powder coating; protective coating

Epoxy value (Eq/kg) : 1.25 – 1.35 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 | Glass transition temperature (Tg) oc : Min 55

Posted in PO PM Product

Lapox ARP-12 | Bisphenol-A based solid resins; medium molecular weight; powder coating; protective coating

Epoxy value (Eq/kg) : 1.42 – 1.53 | Viscosity @ 25oC (mPa s) : 375 – 475 | Softening point (oC) : 80 – 90

Posted in PO PM Product

Lapox B-47 | Bisphenol-A based modified liquid epoxy resin; high gloss; heavy duty flooring; solids coating; grout; crack-filling

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 5.50 | Viscosity @ 25oC (mPa s) : 450 – 650

Posted in PO PM Product

Lapox ARPN-52 (L-552) | Bisphenol-A based modified liquid epoxy resin; FRP; composites; aerospace; Epoxy Phenol Novolac resin; modified resin; high functionality; static condition; dynamic condition; ambient temperature; elevated temperature

Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 6.65 – 6.85 | Viscosity @ 25oC (mPa s) : 1,000 – 1,500

Posted in PO PM Product

Lapox ARL-143 | Bisphenol-A based modified liquid epoxy resin; low viscosity; fire retardant

Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 4.87 – 5.12 | Viscosity @ 25oC (mPa s) : 1,500 – 2,500

Posted in PO PM Product

Lapox ARL-136 | Bisphenol-A based modified liquid epoxy resin; filament winding; pultrusion

Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.30 – 5.70 | Viscosity @ 25oC (mPa s) : 2,500 – 4,500

Posted in PO PM Product

Lapox ARL-135 LV | Bisphenol-A based modified liquid epoxy resin; FRP ; composites

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,000 – 1,500

Posted in PO PM Product

Lapox ARL-135 | Bisphenol-A based modified liquid epoxy resin; FRP; composites

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,700 – 2,500

Posted in PO PM Product

Lapox ARB-33 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; grout; maintenance; protective coating

Colour (Gardner) : Max 1 | Colour (APHA) : Max 75 | Epoxy value (Eq/kg) : 5.12 – 5.55 | Viscosity @ 25oC (mPa s) : 500 – 700

Posted in PO PM Product

Lapox ARB-32 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor top coating; crack-filling; solids coatings; protective coating

Colour (Gardner) : Max 1 | Colour (APHA) : Max 150 |Epoxy value (Eq/kg) : 4.65 – 5.12 | Viscosity @ 25oC (mPa s) : 500 – 700 Colour (Gardner) : Max 1 | Colour (APHA) : Max 75 |Epoxy value (Eq/kg) :

Posted in PO PM Product

Lapox ARB-30 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor coating; protective coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 4,500 – 5,500

Posted in PO PM Product

Lapox ARB-28 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor coating; protective coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000

Posted in PO PM Product

Lapox ARB-26 | Bisphenol-A based modified liquid epoxy resin; floor coating; high gloss; defect free surface; protective coating

Colour (Gardner) : Milky white liquid | Epoxy value (Eq/kg) : 4.80 – 5.10 | Viscosity @ 25oC (mPa s) : 550 – 750

Posted in PO PM Product

Lapox ARB-22 (XR-118) | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor coating; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.90 – 5.20 | Viscosity @ 25oC (mPa s) : 800 – 1,200

Posted in PO PM Product

Lapox B-11 | standard viscosity; Bisphenol-A based unmodified liquid epoxy resin; LER; BLR; protective coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000

Posted in PO PM Product

Lapox B-9 | low viscosity; Bisphenol-A based unmodified liquid epoxy resin; protective coating

Colour (APHA): Max 50 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 8,000 – 11,000

Posted in PO PM Product

Lapox ARL-141 | High viscosity; Bisphenol-A based unmodified liquid epoxy resin; high reactivity; protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.30 – 4.70 | Viscosity @ 25oC (mPa s) : 20,000 – 28,000

Posted in PO PM Product

Lapox AR-101 | standard viscosity; Bisphenol-A based unmodified liquid epoxy resin; protective coating

Colour (Gardner): Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000

Posted in PO PM Product
Scroll Up