Paint and Coatings Industry

Found 91 results for Paint and Coating Industry

Appearance : Clear yellow brown liquid | Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 580 – 635


Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15


Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 15 | Pot life @ 25oC (minutes) : 7 – 9 hr | Mixing ratio (Parts by weight) : 32


Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight) : 40


Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 45 – 55 | Mixing ratio (Parts by weight) : 21


Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 600 – 700 | Pot life @ 25oC (minutes) : 30 – 35 | Mixing ratio (Parts by weight) : 25


Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : 100 – 400 | Amine value (mg KOH/g) : 900 – 1,000 | Pot life @ 25oC (minutes) : 10 – 15 | Mixing ratio (Parts by weight) : 18


Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23


Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 400 – 600 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 60


Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 48


Colour (Gardner) : Max 1 | Amine value (mg KOH/g) : 330 – 360 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 45


Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 70 – 120 | Amine value (mg KOH/g) : 340 – 400 | Pot life @ 25oC (minutes) : 30 – 50 | Mixing ratio (Parts by weight) : 45


Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 335 – 375 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight) : 40


Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa s) : 1,800 – 3,500 | Amine value (mg KOH/g) : 310 – 350 | Pot life @ 25oC (minutes) : 40 – 75 | Mixing ratio (Parts by weight) : 66 | Thin film set time (8 mils) (hours) : 4 – 5


Colour (Gardner) : Max 9 | Viscosity @ 40oC (mPa s) : 50,000 – 75,000 | Amine value (mg KOH/g) : 210 – 230| Mixing ratio (Parts by weight) : 100 – 125


Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 45,000 – 60,000 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 110 – 130 | Mixing ratio (Parts by weight) : 55 – 65


Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 12,000 – 18,000 | Amine value (mg KOH/g) : 350 – 400 | Pot life @ 25oC (minutes) : 60 – 80 | Mixing ratio (Parts by weight) : 50 – 55


Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 425 – 450 | Pot life @ 25oC (minutes) : 120 – 130 | Mixing ratio (Parts by weight) : 50


Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa s) : 2,500 – 5,500 | Amine value (mg KOH/g) : 200 – 225 | Pot life @ 25oC (minutes) : 80 – 100 | Mixing ratio (Parts by weight) : 100


Colour (Gardner) : Max 12 | Viscosity @ 25oC (mPa s) : 700 – 2,000 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 50 – 60 | Mixing ratio (Parts by weight) : 60


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 4.90 – 5.20 | Viscosity @ 25oC (mPa s) : 800 – 1,200


Colour (Gardner) : Milky white liquid | Epoxy value (Eq/kg) : 4.80 – 5.10 | Viscosity @ 25oC (mPa s) : 550 – 750


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 4,500 – 5,500


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 4.65 – 5.12 | Viscosity @ 25oC (mPa s) : 500 – 700


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.12 – 5.55 | Viscosity @ 25oC (mPa s) : 500 – 700


Colour (APHA) : Max 100 | Epoxy value (Eq/kg) : 4.16 – 4.54 | Viscosity @ 25oC (mPa s) : 2000 – 4000


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.70 – 6.30 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 2,000 – 3,000


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 3,300 – 4,100


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.30 | Viscosity @ 25oC (mPa s) : 5,000 – 7,000


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 6.00 – 6.40 | Viscosity @ 25oC (mPa s) : 1,200 – 1,600


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.55 – 5.80 | Viscosity @ 25oC (mPa s) : 6,500 – 8,500


Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.50 – 5.75 | Viscosity @ 25oC (mPa s) : 4,500 – 6,500


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.10 – 5.40 | Viscosity @ 25oC (mPa s) : 800 – 1,100


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.30 – 4.70 | Viscosity @ 25oC (mPa s) : 20,000 – 28,000


Epoxy value (Eq/kg) : 1.42 – 1.53 | Viscosity @ 25oC (mPa s) : 375 – 475 | Softening point (oC) : 80 – 90


Epoxy value (Eq/kg) : 1.25 – 1.35 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 @ 150oC | Glass transition temperature (Tg) (oC) : 55


Epoxy value (Eq/kg) : 1.33 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 600 | Softening point (oC) : 95 – 101


Epoxy value (Eq/kg) : 1.23 – 1.33 | Viscosity @ 25oC (mPa s) : 350 – 450 | Softening point (oC) : 80 – 90


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.70 | Viscosity @ 52oC (mPa s) : 20,000 – 50,000


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 150 – 350 | Non-volatile content (%): 79 – 81


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 800 – 1,500 | Non-volatile content (%) :79 – 81


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 6.00 | Viscosity @ 25oC (mPa s) : 25,000 – 35,000


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000


Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 5.50 | Viscosity @ 25oC (mPa s) : 450 – 650


Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 3.57 – 4.45 | Viscosity @ 25oC (mPa s) : 450 – 800


Epoxy value (Eq/kg) : 3.10 – 3.40 | Viscosity @ 25oC (mPa s) : 600 – 850 | Non-volatile content (%) : 79 – 81 (150oC/1h)


Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 8,000 – 11,000


Colour (Gardner) : Black | Viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 30 | Mixing ratio (Parts by weight) : 100


Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 300 – 600 | Amine value (mg KOH/g) : 260 – 310 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio3 (Parts by weight) : 50


Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)


Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 3,800 – 5,800 | Amine value (eq/kg) : 4.70 – 5.10 | Mixing ratio (Parts by weight) : 60


Appearance : Dark brown liquid | Colour (Gardner) : Max 18 | Viscosity @ 25oC (mPa s) : 15,000 – 21,000 | Amine value (mg KOH/g) : 4.40 – 4.80 (eq/kg) | Mixing ratio (Parts by weight) : 60


Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 200 – 300 | Amine value (eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 18


Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 700 – 900 | Amine value (eq/kg) : 4.70 – 5.00 | Mixing ratio (Parts by weight) : 60


Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 2,900 – 3,600 | Amine value (eq/kg) : 7.10 – 7.40 | Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight) : 35


Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Amine value (mg KOH/g) :490 – 550 | Pot life @ 25oC (minutes) :30 – 55 | Mixing ratio (Parts by weight) : 40 | Thin film set time (8 mils) (hours) : 3 – 4


Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 15,000 – 35,000 | Amine value (mg KOH/g) : 290 – 325 | Pot life @ 25oC (minutes) : 40 – 85 | Mixing ratio (Parts by weight) : 70 | Thin film set time (8 mils) (hours) : 3 – 4


Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 10 – 12


Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12


Appearance : Dark brown liquid | Colour (Gardner) : Max 18 | Viscosity @ 25oC (mPa s) : 5,000 – 10,000 | Amine value (eq/kg) : 4.70 – 5.10 | Mixing ratio (Parts by weight) : 60


Epoxy value (Eq/kg) : 1.08 – 1.18 | Viscosity @ 25oC (mPa s) : 430 – 550 | Softening point (oC) : 90 – 100


Epoxy value (Eq/kg) : 1.90 – 2.20 | Viscosity @ 25oC (mPa s) : 9,000 – 13,000 | Non-volatile content (%) : 74 – 76


Epoxy value (Eq/kg) : 1.80 – 2.20 | Viscosity @ 25oC (mPa s) : 14,000 – 20,000 | Non-volatile content (%) : 74 – 76


Epoxy value (Eq/kg) : 1.07 – 1.16 | Viscosity @ 25oC (mPa s) : 620 – 900 | Softening point (oC) : 100 – 110


Epoxy value (Eq/kg) : 2.15 – 2.22 | Viscosity @ 25oC (mPa s) : 160 – 190 | Softening point (oC) : 65 – 75 |


Epoxy value (Eq/kg) : 1.12 – 1.20 | Viscosity @ 25oC (mPa s) : 550 – 700 | Softening point (oC) : 90 – 102


Epoxy value (Eq/kg) : 0.53 – 0.59 | Viscosity @ 25oC (mPa s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120


Epoxy value (Eq/kg) : 0.34 – 0.42 | Viscosity @ 25oC (mPa s) : 5,000 – 10,000 | Softening point (oC) : 125 – 140


Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) : 95 – 101


Viscosity @ 25oC (mPa s) : 1,500 – 2,000 | Pot life @ 25oC (hours) : 3 – 6 | Mixing ratio (Parts by weight) : 67.5 (with resin P-101)


Epoxy value (Eq/kg) : Max 0.08 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Non-volatile content (%) : 49 – 51 (120oC/2h)


TULACOAT Blue A3G

A transparent bright greenish indanthrone blue pigment with high chroma and color strength. The product has good fastness properties and is primarily recommended for use in various coating applications. It is also recommended for automotive OEM and refinish shades and high-grade industrial paints such as agricultural equipment, implement enamels and powder coatings.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Blue 60


TULACOAT Blue A3R

A blue pigment with a slightly redder tone. The product is a transparent indanthrone blue with high chroma and color strength and good fastness properties, primarily recommended for use in various coating applications. It is also recommended for automotive OEM and refinish shades and high-grade industrial paints such as agricultural equipment, implement enamels and powder coatings.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Blue 60


TULACOAT Orange AOR

A red benzimidazolone pigment extensively used by the Paint industry for agricultural equipment, general industrial applications and colorants.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Orange 36


TULACOAT Orange APC

A brilliant red orange pigment with high strength, good fastness properties and high heat stability. The product is used in a range of applications.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Orange 64


TULACOAT Orange GNS

A transparent Pyrazolone orange pigment with excellent tinting strength and purity. The product has fair light fastness properties in deep shades and is poor in tints. In coatings, the use is limited for interior applications. 

Industry: Paint and Coatings

Group: Organic azo pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Orange 13


TULACOAT Orange GR

A strong and brilliant perinone orange pigment with good weathering and overspray fastness properties. The product has high tinting strength and brilliance.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Orange 43


TULACOAT Orange Y2G

A bright strong diarylide orange pigment with modified particle size to gain high opacity, improved light fastness and flow properties. The product is extensively used in high-grade industrial paints, implement enamels, agricultural equipment and powder coatings.  

Industry: Paint and Coatings

Group: Organic azo pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Orange 34


TULACOAT Red ACB

A blue quinacridone pigment with good fastness properties and high tinctorial strength. The product finds an application in coatings including trade sales, automotive, agricultural equipment, architectural paints and industrial finishes.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Red 122


TULACOAT Red AOB

An opaque bright mid-red pigment used for water-based paints, solvent paints, powder coating, industrial paints and automotive paints.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Red 177


TULACOAT Red ATB

A transparent bright mid-shade red pigment used for water-based paints, solvent paints, powder coating, industrial paints and automotive paints.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Red 177


TULACOAT Scarlet LMY

A red orange pigment with high strength, good fastness properties and high heat stability. The product is used in a range of applications such as high quality industrial paints, automotive OEM paints, latex paints, water-based coatings, solvent-based coatings and metal decorative inks.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Red 168


TULACOAT Violet A3B

A quinacridone violet pigment with good light, weathering and overspray fastness properties. The product has high tinting strength and brilliance.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Violet 19


TULACOAT Yellow A3G

A medium yellow shade pigment with good light and weathering fastness properties. The product is suitable for use in all concentration ranges, down to very pale pastel shades and as a shading pigment.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Yellow 154


TULACOAT Yellow A5G

A yellow pigment with good light and weathering fastness properties. The product has excellent hiding power as an organic pigment. It is suitable to produce intense opaque yellow shades used in lead-free or low-lead paints; it is also used in air-drying paints. It is not suitable for stoving enamels because of the high risk of blooming.

Industry: Paint and Coatings

Group: Organic azo pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Yellow 74


TULACOAT Yellow ALG

An opaque green pigment that appears yellow with low viscosity in liquid systems. The product has excellent light and weathering fastness properties.  It exhibits high hiding power and good dispensability. It is recommended for a wide range of coating applications including solvent-based polyurethane, epoxy and alkyd melamine.

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Yellow 138


TULACOAT Yellow ALR

A reddish yellow pigment with excellent opacity and light fastness properties in deep shades. The product is recommended for general industrial coatings where good rheology and opacity is required. It may also be used in combination with inorganics as a replacement for chrome yellow medium.  It is also used in automotive refinishes

Industry: Paint and Coatings

Group: Organic high performance pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Yellow 139


TULACOAT Yellow RHW

A transparent reddish yellow pigment with high strength and purity. The product has excellent fastness and dielectric properties. 

Industry: Paint and Coatings

Group: Organic azo pigments

Application: Coloration

Range: TULACOAT

CI name | CAS number: Pigment Yellow 83


Scroll Up