Updates

Year: 2017

19 de diciembre de 2017: Recordando a Shri Kasturbhai Lalbhai en su 123 aniversario de nacimiento

No sólo el mundo de los negocios se benefició de la visión de Kasturbhai, sino que enriqueció el tejido educativo, social y cultural de nuestra nación con igual distinción. Fue su firme adhesión a los valores lo que lo hizo

Posted in Global Updates

Lapox® Metalam-B

Lapox Metalam is a two-component modified epoxy system. The product is ideal for applications such as coating and laminating glass, metals, plastic, wood, paper stickers and natural stones. It is available in pack sizes of 1.5 kg and 7.5 kg.

Posted in Polymer Retail

Lapox® Metalam-A

Lapox Metalam is a two-component modified epoxy system. The product is ideal for applications such as coating and laminating glass, metals, plastic, wood, paper stickers and natural stones. It is available in pack sizes of 1.5 kg and 7.5 kg.

Posted in Polymer Retail

Lapox® Granito ASR-200_AS-400

Lapox Granito is a two-component modified epoxy based system. The product is ideal for applications such as casting of decorative parts and table top. It is available in pack sizes of 1.25 kg, 5 kg and 10 kg.

Posted in Polymer Retail

Noviembre 2017: Atul en CPhI India

Los representantes Atul de Aromáticos, Químicos a Granel y Negocios Farmacéuticos participaron en CPhI India, Mumbai, y se pusieron en contacto con clientes y socios para discutir las soluciones y los productos de alta calidad para satisfacer sus necesidades de

Posted in Global Updates

Noviembre 2017: Urmi ahora tiene su licencia FSSAI

Fundada por Atul Ltd en 1953, Urmi trabaja para empoderar a las mujeres. Las especias frescas y tradicionalmente preparadas son la identidad de la organización. Las mujeres de las aldeas circundantes están dedicadas a secar, machacar, mezclar y envasar estas

Posted in Global Updates

Octubre 2017: Inauguración de la nueva planta de energía

En el auspicioso día de Laabh Panchami 2017, Atul inauguró su nueva planta de energía, el mayor proyecto de la historia de la Compañía. Las calderas de la planta, la planta de carbón, la turbina y las unidades de manejo

Posted in Global Updates

October 25, 2017: Colors Business inaugurated its new Analytical laboratory at Atul

On October 25, 2017 on the auspicious occasion of Laabh Pancham (Gyaan Panchami), our Colors Business inaugurated its new Analytical laboratory at Atul. Well-equipped with the latest spectroscopic instruments, this state-of-the-art facility will enhance the quality assurance of dyes and

Posted in Colors Updates

25 de octubre de 2017: Colors Business inauguró su nuevo laboratorio Analítico en Atul

El 25 de octubre de 2017, en la auspiciosa ocasión de Laabh Pancham (Gyaan Panchami), nuestro Negocio de Colores inauguró su nuevo laboratorio Analítico en Atul. Bien equipada con los últimos instrumentos espectroscópicos, esta instalación de última generación mejorará la

Posted in Global Updates

October 2017: Visit us at AgroChemEx Shanghai, 2017

Atul will be participating at AgroChemEx Shanghai, 2017. AgroChemEx is an annual agrochemical symposium and exhibition organised by the China Crop Protection Industry Association. It provides a valuable platform for the exchange of information and business development opportunities by attracting

Posted in CP Brand Updates

September 2017: Efficax – a premium product launched by Crop Care

Efficax, launched by Atul, is a super spreader surfactant for agriculture use with high penetration. Key features of this product are outlined below. 100% pure trisiloxane increases efficacy of crop care chemicals used improves spraying efficiency safe to use with

Posted in CP Brand Updates

Septiembre 2017: Encuentro Acuático Nacional en Atul Vidyalaya

La 21ª Asociación de Escuelas para el Certificado Escolar Indio (ASISC) – Encuentro Acuático Nacional se celebró el 30 de septiembre y el 1 de octubre de 2017. El evento fue organizado por cuarta vez por Atul Vidyalaya bajo el

Posted in Global Updates

Lapox ARL-135 | AH-332 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox ARL-135 | AH-333 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

19 de septiembre de 2017: Visita de Sadhguru Jaggi Vasudev a Atul, Rally de Ríos

Junto con su equipo, Sadhguru está viajando por carretera desde Kanyakumari al Himalaya como parte del Rally de Ríos, una iniciativa para difundir la conciencia sobre el agotamiento de los ríos y la urgente necesidad de salvarlos. Atul, situado a

Posted in Global Updates

Lapox L-552 | K-552

Mixing ratio (Parts by weight) : 100 : 38 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 110 – 160 | Glass transition temperature (Tg) (o) : 115 – 130

Posted in PO PM Industry

Lapox ARD-57 (XR-104) | aerospace, aromatic-difunctional, aniline based reactive diluent, high performance composite

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 8.15 – 9.50 | Viscosity @ 25oC (mPa s) : 100 – 200

Posted in PO PM Industry

Lapox P-3 (ARP-11) | Bisphenol-A based solid resins. Type 1, protective coating, enamels

Epoxy value (Eq/kg) : 2.15 – 2.22 | Viscosity @ 25oC (mPa s) : 160 – 190 | Softening point (oC) : 65 – 75 |

Posted in PO PM Industry

Lapox ARCH-13 | AH-215

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 70 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F

Posted in PO PM Industry

Lapox ARC-16 | AH-118 | ADP-11 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Pre-filled, Hot cure Indoor

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 80 : 0 – 8 | Glass transition temperature (Tg) (oC) : 105 – 115 | Thermal class :

Posted in PO PM Industry

Lapox ARL-135 LV | AH-334 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox AH-618 (K-5200) | Aromatic amine; long pot life; Elevated temperature curing curing agent; high glass transition temperature; high Tg

Appearance : Yellow to brown liquid | Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 100 – 300 | Amine value (mg KOH/g) : 628 – 634 | Mixing ratio (Parts by weight) : 24

Posted in PO PM Product

Lapox AH-315 | adhesives; casting; coating; composite applications; protective coatings; unmodified polyamine curing agent

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 15 | Pot life @ 25oC (hours) : 7 – 9 | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Coming soon

Coming soon

Posted in Life with Atul Updates

Coming soon

Coming soon

Posted in Life with Atul Updates

Coming soon

Coming soon

Posted in Life with Atul Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in BI Updates

Launching BOND 70 Pan India retailer scheme

2017 marks the 70th anniversary of Atul Ltd. The history of the Company is closely linked to that of independent India: both started their journey in 1947 and endeavour to consistently improve over the years. In light of this, Polymers

Posted in PO Retail Updates

Launching ‘Lacare’

Polymers Retail is launching a new range of maintenance products under the brand Lacare for automobile, industrial and household applications. The upcoming product portfolio for this maintenance range is as follows: Generic name Application Multi-purpose maintenance spray Penetrates rust and

Posted in PO Retail Updates

Pilot launch of retail module at Valsad

Polymers Retail had a pilot launch of its retail module from April-June 2017 in Valsad, Pardi and Udwada. While it has been challenging for the Business to move from a no presence zone to a significant presence zone, the experience

Posted in PO Retail Updates

New R&D facility at Atul

New R&D facility at Atul

Posted in POPM Updates

Stall at ICERP – 2017

Polymers Performance Materials participated in ICERP 2017 in Mumbai. The exhibition was held on 10 – 12 January 2017. It gave us an opportunity to personally meet and discuss with the various personnel and decision makers of composites industry.

Posted in POPM Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Floras Updates

Flame Awards Asia, 2016

Atul Ltd received a certificate of merit for its greening the desert project by Flame Awards Asia, 2016

Posted in Floras Updates

Wholesome, fresh and delicious Barhee Dates now available at Atul

These fresh Barhee dates are from Atul’s farms in the beautiful Thar desert in Rajasthan and farmer fields in various parts of India, cultivated with Atul’s tissue culture raised date palms.

Posted in Floras Updates

Coming soon

Coming soon

Posted in CP Brand Updates

Coming soon

Coming soon

Posted in CP Brand Updates

Coming soon

Coming soon

Posted in CP Brand Updates

Coming soon

Coming soon

Posted in CP Bulk Updates

International Cropscience Conference and Exhibition

International Cropscience Conference and Exhibition

Posted in CP Bulk Updates

AgriBusiness Global – Trade Summit, Las Vegas, USA

AgriBusiness Global – Trade Summit, Las Vegas, USA

Posted in CP Bulk Updates

Launch of mobile application

Colors Business launched an innovative mobile application for effective customer service and was conferred with the Customer Excellence award.

Posted in Colors Updates

New machinery at Technical Services laboratory, Atul

Dr GVG Rao, President, Colors Business, inaugurated new machinery at the Technical Services (TS) laboratory, Atul. The TS laboratory focuses on customer support activities, particularly textile dyeing and printing application techniques.

Posted in Colors Updates

Seminar in Ethiopia

A representative from Colors Business participated in and conducted a technical seminar on ‘Selection, Evaluation, Application and Disposal of Dyes and Chemicals’ in Ethiopia. The seminar was organised by the Ethiopian Textile Industry Development Institute in twinning partnership with the

Posted in Colors Updates

Coming soon

Coming soon

Posted in BI Updates

Coming soon

Coming soon

Posted in BI Updates

Coming soon

Coming soon

Posted in Aromatics Updates

Coming soon

Coming soon

Posted in Aromatics Updates

Chemspec Europe – 2017, 31 May – 1 June 2017

Chemspec Europe – 2017, 31 May – 1 June 2017

Posted in Aromatics Updates

Mayo 2017: La empresa conjunta Atul – AkzoNobel

AkzoNobel y Atul han anunciado su intención de invertir conjuntamente en la producción de ácido monocloroacético (ACM) en la India. Esto incluirá el establecimiento de una planta de MCA de clase mundial en la primera planta de fabricación de Atul

Posted in Global Updates

Abril 2017: Atul declarado una “comunidad sin dinero en efectivo”

Con ocasión de Ambedkar Jayanti, el Primer Ministro Narendra Modi, bajo la dirección de Digi Dhan Vyapar Yojana de Niti Aayog, declaró a Atul Ltd., municipio de Valsad, como uno de los setenta y cinco “municipios sin dinero en efectivo”

Posted in Global Updates

Marzo 2017: Atul inauguró su nueva oficina en Thane

La oficina de Atul en la oficina Thane.

Posted in Global Updates

Fruta fresca de dátiles Barhee disponible para su venta en Atul

Estos dátiles Barhee frescos proceden de las granjas de Atul en el hermoso desierto de Thar, en Rajastán, y de campos de cultivo en varias partes de la India, cultivados con palmeras datileras de cultivo de tejidos de Atul.

Posted in Global Updates

2016-17: La Fundación Atul organizó campamentos oftalmológicos y de otorrinolaringología que beneficiaron a más de 3.000 pacientes

En 2016-17, la Fundación Atul organizó campamentos de oftalmología y otorrinolaringología que beneficiaron a 3103 pacientes en 10 pueblos, 129 fueron operados de cataratas y 551 recibieron gafas.

Posted in Global Updates

Biopearl – Seaweed extract | Biopearl; Seaweed extract

A bio-stimulant derived from seaweed extract (Ascophyllum nodusum). The product is used as a plant growth stimulant, enhancing plant vigour at critical stages and improving crop productivity.

Posted in Crop Protection Brands

Efficax – Silicone super spreader | Efficax; Silicone; Super spreader

A silicone based surfactant used as a tank mix with and herbicides, insecticides and fungicides to improve its bio-efficacy.

Posted in Crop Protection Brands

Xyris Gold – Pendimethalin 38.7% CS | Xyris gold; Pendimethalin

A selective pre-emergence herbicide used to control most grasses and some broad-leaved weeds in various crops.

Posted in Crop Protection Brands

Xyris – Pendimethalin 30% EC | Xyris; Pendimethalin

A selective pre-emergence herbicide used to control most grasses and some broad-leaved weeds in various crops.

Posted in Crop Protection Brands

Ulmin – Atrazine 50% WP | Ulmin; Atrazine

A selective pre and early post-emergence herbicide of the Triazine group used to control a wide range of grasses and broad-leaved weeds in maize and sugarcane.

Posted in Crop Protection Brands

Photix – Bispyribac sodium 10% SC | Oryzae; Tricyclazole

A broad spectrum systemic post-emergence herbicide used to control grassy weeds such as Echinochloa spp, sedges and broad-leaved weeds in paddy.

Posted in Crop Protection Brands

Irio – Butachlor 50% EW | Irio; Butachlor

A selective, pre-emergence herbicide used to control most grasses and some broad-leaved weeds in transplanted paddy.

Posted in Crop Protection Brands

Cydus – Paraquat dichloride 24% SL | Cudus; Paraquat

A non-selective, post-emergence contact herbicide used to control annual grasses and broad-leaved weeds in tea, row crops and non-crop areas.

Posted in Crop Protection Brands

Oryzae – Tricyclazole 75% WP | Oryzae; Tricyclazole

A systemic insecticide with protective and curative action used to control blast in paddy.

Posted in Crop Protection Brands

Villo Gold – Sulphur 90% WDG | Villo gold; Sulphur

A sulphur based fertiliser for soil application used to overcome sulphur deficiencies and nutrition stress in plants and the soil.

Posted in Crop Protection Brands

Villo – Sulphur 80% WP | Villo; Sulphur

An inorganic contact fungicide with protective action and acaricidal activity. The product is recommended for controlling powdery mildews in various crops.

Posted in Crop Protection Brands

Mintho – Carbendazim 50% WP | Mintho; Carbendazim

A broad spectrum systemic fungicide of the Benzimidazole group used to control a range of diseases in various crops, with its protective and curative action.

Posted in Crop Protection Brands

Cantho – Copper oxychloride 50% WP | Cantho; COC; Copper oxychloride

A broad spectrum contact and protective fungicide and bactericide used to control wide range of fungal diseases in various crops.

Posted in Crop Protection Brands

Lypus – Imidacloprid 40% + Fipronil 40% WG | Lypus; Imida + Fipro; Imidacloprid + Fipronil

A systemic insecticide of the Neonicotinoid and Phenylpyrazole group with contact and stomach action. The product is used to control chewing and sucking insect pests.

Posted in Crop Protection Brands

Orax – Profenofos 50% EC | Orax; Profeno; Profenofos

A broad spectrum insecticide and acaricide of the Organophosphorus group used to control a range of chewing and sucking insects in various crops.

Posted in Crop Protection Brands

Galastar – Bifenthrin 10% EC | Galastar; Bifenthrin

A broad spectrum insecticide | miticide of the Synthetic pyrethroids group with contact and stomach action. The product is effective against a broad range of lepidopteran pests, sucking pests, mites and termites in various crops.

Posted in Crop Protection Brands

Balio – Chlorpyrifos 50% + Cypermethrin 5% EC | Balio; Chloro + Cyper; Chlorpyrifos + Cypermethrin

A non-systemic insecticide of Organophosphorus and Synthetic pyrethroids group with contact and stomach action. The product is used to control chewing and sucking insect pests.

Posted in Crop Protection Brands

Lapox Ultraquick

One-component, solvent free, nearly instant setting adhesive. The product is ideal for applications such as bonding of marble, glass, metal, plastic, wood, sun board and flex and filling gaps in PVC doors. Lapox Ultraquick is available in the pack size

Posted in Polymer Retail

Hexaconazole 5% EC | CAS No. 79983-71-4 | HS Code. 3808 92 90

A systemic fungicide that is used to control scab in apple, tikka leaf spot in groundnut, powdery mildew in mango and blast and sheath blight in rice.

Posted in Crop Protection Bulk Actives

Propiconazole technical 88% min | CAS No. 60207-90-1 | HS Code. 3808 92 90

A systemic fungicide of the Triazole group used to control fungal diseases. The product finds an application in wood preservation.

Posted in Crop Protection Bulk Actives

Lapox XR-110 | XH-68 | cable joints; composite adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Product

Lapox A-16 | AH-800 | rapid cure; similar substrate; dissimilar substrate; composite adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 3 – 7

Posted in PO PM Product

Lapox ARCH-11 | K-3 | K-13 | industrial; filament winding and pultrusion; hot cure system; out door application; UV resistance

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 105 –

Posted in PO PM Product

Lapox A-83 | K-83 | gap filling; standard adhesive; composite adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 35 – 45

Posted in PO PM Product

Lapox B-11 | K-48 | construction; Maintenance; repair; crack-filling; quick setting

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Product

Lapox B-47 | K-48 | construction; Maintenance; grouting; quick setting. excellent adhesion; good strength

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Product

Lapox B-11 | K-49 | construction; Maintenance; chemical resistant flooring; protection of metal structures; protection from corrosive chemicals; protection from alkali; protection from solvents

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110

Posted in PO PM Product

Lapox B-11 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; variable potlife system; excellent acid and alkali resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300

Posted in PO PM Product

Lapox ARPN-54 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; high viscosity system; variable pot life system; chemical resistance; industrial flooring

Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330

Posted in PO PM Product

Lapox ARPN-42 | AH-105 | construction; Maintenance; chemical resistant flooring; coal tar modified system; coating of pipes; vehile chassis; concrete structure

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Product

Lapox B-47 | AH-416 | Maintenance; self-leveling system; low viscosity system; excellent gloss; excellent hardness; moderate chemical resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox B-11 | AH-428 | Maintenance; self-leveling system; moderate viscosity system; excellent gloos; good chemical resistance; construction

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Product

Lapox ARB-26 | AH-416 | Maintenance; self-leveling system; low viscosity system; high gloss finish

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox ARB-22 | AH-428 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction

Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35

Posted in PO PM Product

Lapox ARB-22 | AH-416 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction

Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60

Posted in PO PM Product

Lapox B-47 | K-41 | K-42 | Maintenance; mortar; screed; varying pot life; excellent chemical resistance; construction

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330

Posted in PO PM Product

Lapox ARPN-54 | AH-351 | Maintenance; mortar; screed; fast reactive system; excellent chemical resistance; construction

Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Product

Lapox B-47 | AH-714 | Maintenance; primer; low viscosity primer system; general application; construction

Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150

Posted in PO PM Product

Lapox B-47 | AH-713 | Maintenance; primer; faster curing; construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130

Posted in PO PM Product

Lapox B-47 | AH-546 | Maintenance; primer; standard system for extreme condition; moist surface; construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80

Posted in PO PM Product

Lapox B-11 | AH-543 | Maintenance; primer; very low temperature curing; curing in high humidity; moist surface; construction

Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox ARA-30 | AH-735 | structural adhesive; high lap shear strength; composite adhesive

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 35 – 50

Posted in PO PM Product

Lapox ARA-17 | AH-354 | toughness; quick; composite adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10

Posted in PO PM Product

Lapox ARL-140 | AH-419 | industrial; tooling; laminating system; high Tg; high glass transition temperature; dimensional stability

Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220

Posted in PO PM Product

Lapox ARL-138 | AH-339 | industrial; tooling; laminating system; standard tooling system; excellent Tg; excellent glass transition temperature

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Product

Lapox ART-24 | AH-326 | industrial; tooling; gel coat system; colourless gel coat system

Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115

Posted in PO PM Product

Lapox ART-23 | AH-326 | industrial; tooling; gel coat system; high hardness; high abrasion resistance; good finish

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ART-22 | AH-326 | industrial; tooling; gel coat system; high thermal conductivity; excellent hardness; excellent surface finish

Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95

Posted in PO PM Product

Lapox ART-21 | AH-326 | industrial; tooling; gel coat system; general purpose

Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox L-552 | K-552 | industrial; RTM; hand lay-up and infusion system; low viscosity system; high Tg; high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 38 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 110 – 160 | Glass transition temperature (Tg) (oC) : 115 – 130

Posted in PO PM Product

Lapox ARTF-15 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 111,000 – 13,000

Posted in PO PM Industry

Cresol mixture | Phenol mixture

A cost effective substitute for cresylic acid and phenol.

Posted in Aromatics

TULACTV Navy CC | CAS No. Reactive Blue 250

An economical trichromatic navy dye with good dischargeability. The product is used to develop medium to dark shades.

Posted in Colors

TULACTIV Blue CC

A trichromatic blue dye with good dischargeability.

Posted in Colors

TULACTIV Ultra Carmine CC

A deep red dye used for scarlet, dark red, brown and burgundy shades.

Posted in Colors

TULACTIV Ultra Red CC

A red dye with high tinctorial strength and excellent build-up properties. The product is used to develop medium to dark shades.

Posted in Colors

TULACTIV Deep Red CC

A bluish red dye with high tinctorial strength.

Posted in Colors

TULACTIV Red CC

An economical bluish red dye used in trichromatic combinations.

Posted in Colors

TULACTIV Ultra Yellow CC

A golden yellow dye with high tinctorial strength used to develop deep shades with good all round fastness properties.

Posted in Colors

TULACTIV Yellow CC

A basic trichromatic golden yellow dye with good dischargeability.

Posted in Colors

TULAREVS Blue LF-R

A blue dye with good light fastness properties used for pale to medium shades.

Posted in Colors

TULAREVS Red LF-2B

A red dye with good light fastness properties used for pale to medium shades.

Posted in Colors

TULAREVS Yellow LF-2R

A yellow dye with good light fastness properties used for pale to medium shades.

Posted in Colors

TULAREVS Black B Conc (133%) | CAS No. Reactive Black 5

An economical navy dye with good build-up properties.

Posted in Colors

TULACTIV Black RL | CAS No. Reactive Black 31

A black dye used to develop black to grey shades. The product has good light fastness properties.

Posted in Colors

TULACTIV Turquoise H2GP | CAS No. Reactive Blue 77

A turquoise dye with good build-up properties.

Posted in Colors

TULACTIV Turquoise G (90%) | CAS No. Reactive Blue 21 133

A turquoise dye with good build-up properties.

Posted in Colors

TULACTIV Blue R (100%) | CAS No. Reactive Blue 19

A brilliant reddish blue dye used to develop bright royal blue shades.

Posted in Colors

TULACTIV Blue BB | CAS No. Reactive Blue 220

A trichromatic blue dye with good fastness properties. The product has good dischargeability.

Posted in Colors

TULACTIV Violet 5R | CAS No. Reactive Violet 5

A bright violet dye used for various shades of violet.

Posted in Colors

TULACTIV Red BS | CAS No. Reactive Red 111

An economical bluish red dye used for medium and dark shades.

Posted in Colors

TULACTIV Red RB | CAS No. Reactive Red 198

An economical trichromatic red dye.

Posted in Colors

TULACTIV Red 5 B | CAS No. Reactive Red 35

An economical trichromatic red dye with high tinctorial strength.

Posted in Colors

TULACTIV Orange 3R | CAS No. Reactive Orange 16

A bright orange dye used for orange and scarlet shades.

Posted in Colors

TULACTIV Orange 2R

An economical orange dye.

Posted in Colors

TULACTIV Yellow RNL | CAS No. Reactive Yellow 107

An economical golden yellow dye used in trichromatic combinations.

Posted in Colors

TULACTIV Yellow R | CAS No. Reactive Orange 201

A bright yellow dye used in tertiary combinations with good light fastness properties.

Posted in Colors

TULACTIV Yellow FG | CAS No. Reactive Yellow 42

A yellow dye with all round fastness properties.

Posted in Colors

NOVATIC Grey 2305 MD

An ideal grey component with excellent performance in Exhaust and Continuous dyeing applications by Soft flow and Pad Dry Pad steam techniques. The product has good all round fastness properties. It is available in Microperle and Micro disperse varieties.

Posted in Colors

NOVATIC Navy DS MD

A navy dye with excellent build-up properties used for coloration of workwear and institutional wear. The product is used in combination with Yellow 3R and Jade Green XBN for Exhaust application. It shows minimum shade change when used with flame

Posted in Colors

Xantho – Hexaconazole 5% EC | Xantho; Hexaconazole

A systemic fungicide with protective and curative action used to control broad spectrum fungal diseases in various field crops and fruits.

Posted in Crop Protection Brands

Rugo – 2,4-D Ethyl Ester 38% EC | 2,4-D | 2,4-D Ethyl ester | Rugo

A selective and systemic post-emergence herbicide readily absorbed by leaves. The product is used to control annual and perennial broad-leaved weeds in a range of crops.

Posted in Crop Protection Brands

para Cresol (UHP- Ultra high purity) | CAS No. 106-44-5 | 4-Methylphenol; p-Hydroxytoluene; p-Methylphenol; 4-Hydroxytoluene

A high purity grade of para Cresol for niche applications.

Posted in Aromatics

para Cresol | CAS No. 106-44-5 | 4-Methylphenol; p-Hydroxytoluene; p-Methylphenol; 4-Hydroxytoluene

A starting ingredient in most versatile phenolic group antioxidants.

Posted in Aromatics

Ambrettolide | CAS No. 28645-51-4 | 9-Hexadecenoic acid; 16-hydroxy-; o-lactone; Oxacycloheptadec-10-en-2-one

A naturally sourced aroma ingredient with a musk-like profile.

Posted in Aromatics

Skatole | CAS No. 83-34-1 | 3-Methyl-1H indole; Beta-methyl indole; 3-Methyl-4; 5-benzopyrrole

A key ingredient in specialty fragrance formulations.

Posted in Aromatics

Phenyl acetic acid | CAS No. 103-82-2 | Phenylethanoic acid; 2-Phenylacetic acid; α-Toluic acid; Benzeneacetic acid

An intermediate widely used by the Pharmaceuticals and Crop Protection Chemicals industry.

Posted in Aromatics

para Anisyl propanal | CAS No. 5462-06-6 | Hydrocinnamaldehyde p-methoxy- α –methyl 4-Methoxy-α-Methylbenzenepropanal 3-(4-methoxyphenyl)-2-methylpropanal 2-Methyl-3-(4-methoxyphenyl)propanal

An aroma ingredient with sweet, floral, fennel and basil-like, mildly fruity odour. The product finds a major application in oral care products, flavours and fragrances.

Posted in Aromatics

para Methoxy phenyl acetic acid | CAS No. 104-01-8 | 4-Methoxybenzeneacetic acid; Homoanisic acid; p-Anisylacetic acid

A key building block for Dextromethorphan, a widely used formulation to treat cough and cold.

Posted in Aromatics

Lapox B-47 | AH-714 | Maintenance, primer , low viscosity primer system, general application, construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150

Posted in PO PM Industry

Lapox B-11 | AH-543 | Maintenance, primer , very low temperature curing, curing in high humidity, moist surface, construction

Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Industry

Lapox AH-725 | polyamide curing agent, bonding, fast reactivity

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 7,000 – 11,000 | Amine value (mg KOH/g) : 400 – 450 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox ARC-35 AH-676 | Electrical and Electronics, Electronics, Encapsulation, Pre-filled, “Hot cure Indoor”

Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 26 | Glass transition temperature (Tg) (oC) : 70 – 80 | Thermal class : F

Posted in PO PM Industry

Lapox ARC-30 | AH-714 | Electrical and Electronics, Vacuum potting, Pre-filled, “Cold cure Indoor”

Type of system : Pre-filled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B

Posted in PO PM Industry

Lapox ARL-111 | AH-358 | ARS-101

Type of system : Unfilled | Nature : Hot cure Indoor | Voltage class : MV / HV | Mixing ratio (parts by weight) : 100 : 15 | Glass transition temperature (Tg) (oC) : 80 – 90 | Thermal

Posted in PO PM Industry

Lapox K-24 | Aromatic amine, curing agent, construction, composite, coatings

Appearance : Yellow liquid | Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 1,000 – 2,500 | Amine value (Eq/kg) : 8.00 – 9.00 | Mixing ratio (Parts by weight) : 34

Posted in None

Lapox ARC-31 | AH-114 | AC-13 | Electrical and Electronics, Dry type Distribution Transformer, Encapsulation, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.0 – 0.2 | Glass transition temperature (Tg) (oC) : 90 – 100 | Thermal class :

Posted in PO PM Industry

Lapox ARD-58 | aromatic – monofunctional, reactive diluent, cardanol, coating, adhesives, electrical applications

Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 2.20 – 2.60 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 1.00

Posted in PO PM Industry

Lapox ARD-15 (K-513) | aromatic – monofunctional, reactive diluent, cardanol, coating, adhesives, electrical applications

Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 1.80 – 2.40 | Viscosity @ 25oC (mPa s) : 40 – 70 | HyCl (%) : Max 1.00

Posted in PO PM Industry

Lapox ARD-12 (XR-59) | aromatic – monofunctional, reactive diluent, p-tertiary butyl phenol, high chemical resistance, flooring

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.10 – 4.50 | Viscosity @ 25oC (mPa s) : 20 – 35 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox ARD-11 (K-103) | aromatic – monofunctional, reactive diluent, phenol, flooring, electrical application

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.90 – 6.30 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox ARD-10 (K-100) | aromatic – monofunctional, reactive diluent, o-Cresol, high gloss, high mechanical strength, flooring, electrical application

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.30 – 6.00 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox C-1 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F

Posted in PO PM Industry

Lapox C-59 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, Hot cure Indoor

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F

Posted in PO PM Industry

Lapox C-2 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoo | Mixing ratio (parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F

Posted in PO PM Industry

Lapox ARC-18 | AH-123 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Prefilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 122 – 132 | Thermal class : F

Posted in PO PM Industry

Lapox C-50 | K-225 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC) : 90 – 105 | Thermal class : H

Posted in PO PM Industry

Lapox C-50 | K-61 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC): 105 – 125 | Thermal class : H

Posted in PO PM Industry

Lapox C-17 | K-12 | K-13 | K-14 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 100 : 0.5 – 1.5 : 0 – 20 | Glass transition temperature (Tg) (oC): 85 – 95 | Thermal class :

Posted in PO PM Industry

Lapox ARCH-12 | AH-215 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F

Posted in PO PM Industry

Lapox ARD-65 | aliphatic – trifunctional, reactive diluent, castor oil, concrete, flooring, thermal shock resistance

Colour (Gardner) : Max 6 | Epoxy value (Eq/kg) : 1.54 – 2.00 | Viscosity @ 25oC (mPa s) : 250 – 500

Posted in PO PM Industry

Lapox ARCH-12 | AH-214 | K-13 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 80 : 0.5 – 2.0 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F

Posted in PO PM Industry

Lapox ARCH-11 | AH-215 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 90 | Glass transition temperature (Tg) (oC): 100 – 110 | Thermal class : F

Posted in PO PM Industry

Lapox ARCH-11 | AH-214 | K-13 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 90 : 0.5 – 2.0 | Mix viscosity : 1,000/80 | Glass transition temperature (Tg) (oC): 100 – 110 | Thermal class

Posted in PO PM Industry

Lapox ARD-55 (XR-85) | aerospace, reactive diluent, aliphatic-trifunctional, Trimethylol propane based reactive diluent

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 25oC (mPa s) : 100 – 200 | HyCl (%) : Max 0.15

Posted in None

Lapox ARC-15 | AH-122 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Pre-filled, “Hot cure Indoor”

Type of system : Pre-filled | Nature : Hot cure Indoor | Mixing ratio (parts by weight) : 100 : 100 | Glass transition temperature (Tg) (oC) : 110 – 120 | Thermal class : H

Posted in PO PM Industry

Lapox ARD-56 (XR-87)

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.90 – 8.00 | Viscosity @ 25oC (mPa s) : 12 – 18 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-54 (XR-19)

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 2.90 – 3.20 | Viscosity @ 25oC (mPa s) : 40 – 90 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-52 (XR-86) | aliphatic – difunctional, reactive diluent, 1,6-hexane diol, aerospace

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 6.80 | Viscosity @ 25oC (mPa s) : 15 – 30 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-51 (K-77) | aliphatic – difunctional, reactive diluent, 1,4-butane diol

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 7.00 – 7.80 | Viscosity @ 25oC (mPa s) : 10 – 22 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-14 (XR-83) | aliphatic – monofunctional, reactive diluent, extreme low viscosity, construction, flooring

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 7.30 | Viscosity @ 25oC (mPa s) : Max 2 | HyCl (%) : Max 0.10

Posted in PO PM Industry

Lapox ARD-13 (XR-80) | aliphatic – monofunctional, reactive diluent, excellent wetting, excellent flexibility, flooring, coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 3.35 – 3.70 | Viscosity @ 25oC (mPa s) : 4 – 12 | HyCl (%) : Max 0.10

Posted in PO PM Industry

Lapox ARCH-11 (XR-34) | Cycloaliphatic resins, electrical casting, potting, UV resistance, outdoor coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.50 – 6.30 | Viscosity @ 25oC (mPa s) : 500 – 1,100

Posted in PO PM Industry

Lapox ARFM-14 (XR-106) | Bisphenol-A/F blends, solids coating, construction, floor coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.10 – 5.40 | Viscosity @ 25oC (mPa s) : 860 – 960

Posted in PO PM Industry

Lapox A-38 | K-99 | joints, moisture resistance, high adhesion, chemical resistant, construction adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 20 – 25

Posted in PO PM Industry

Lapox ARPN-54 | K-41 | K-42 | Maintenance, mortar, screed, excellent chemical resistance, varying pot life, construction

Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330

Posted in PO PM Industry

Lapox ARL-135 LV | Bisphenol-A based modified liquid epoxy resin, FRP , composites

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,000 – 1,500

Posted in PO PM Industry

Lapox ARL-135 | Bisphenol-A based modified liquid epoxy resin, FRP , composites

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,700 – 2,500

Posted in PO PM Industry

Lapox B-11 | K-48 | construction, Maintenance, repair, crack-filling, quick setting

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Industry

Lapox B-47 | K-48 | construction, Maintenance, grouting, quick setting, excellent adhesion, good strength

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Industry

Lapox B-11 | K-49 | construction, Maintenance, chemical resistant flooring, protection of metal structure, protection from corrossive chemicals, protection from alkali, protection from solvents

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110

Posted in PO PM Industry

Lapox B-11 | K-41 | K-42 | construction, Maintenance, chemical resistant flooring, variable potlife system, excellent acid and alkali resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300

Posted in PO PM Industry

Lapox ARPN-54 | AH-351 | Maintenance, mortar, screed, fast reactive system, excellent chemical resistance, construction

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Industry

Lapox ARPN-42 | AH-105 | construction, Maintenance, chemical resistant flooring, coal tar modified system, coating of pipes, vehile chassis, concrete structure

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Industry

Lapox B-47 | AH-416 | Maintenance, self-leveling system, low viscosity system, excellent gloss, excellent hardness, moderate chemical resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Industry

Lapox B-11 | AH-428 | Maintenance, self-leveling system, moderate viscosity system, excellent gloos, good chemical resistance, construction

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Industry

Lapox ARB-26 | AH-416 | Maintenance, self-leveling system, low viscosity system, high gloss finish

Mixing ratio (Parts by weight) :100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Industry

Lapox ARB-22 | AH-428 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction

Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35

Posted in PO PM Industry

Lapox ARB-22 | AH-416 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction

Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60

Posted in PO PM Industry

Lapox B-47 | K-41 | K-42 | Maintenance, mortar, screed, varying pot life, excellent chemical resistance, construction

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330

Posted in PO PM Industry

Lapox B-47 | AH-713 | Maintenance, mortar, screed, standard system, system for extreme condition, screed lining, construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130

Posted in PO PM Industry

Lapox B-47 | AH-546 | Maintenance, mortar, screed, standard system, system for extreme condition, moist surface, construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80

Posted in PO PM Industry

Lapox ASH-11 | aerospace, curing agent, sulfone, 3,3′-Diaminodiphenyl sulfone, more reactive, fast curing, high productivity, powder

Chemistry : 3,3′-Diaminodiphenyl sulfone | Appearance : White to brownish white powder | Melting point (oC) : 167 – 175

Posted in None

Lapox ASH-10 MIC | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Micronised, micronised ASH-10, uniform dispersion in solvent-free resin, powder

Chemistry : 4,4′-Diaminodiphenyl sulfone Micronised | Appearance : White to off-white powder | Melting point (oC) : 176 – 180

Posted in None

Lapox ASH-10 FF | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Free Flow, Free flowin ASH-10, easy operation , easy handling, powder

Chemistry : 4,4′-Diaminodiphenyl sulfone Free Flow | Appearance : White to off-white powder | Melting point (oC) : 176 – 185

Posted in None

Lapox ASH-10 | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone, extremely slow reactivity, prepreg, advance composite, powder

Chemistry : 4,4′-Diaminodiphenyl sulfone | Appearance : White to off-white powder | Melting point (oC) : 176 – 185

Posted in None

Lapox AH-667

Chemistry : 4,4′-Diaminodiphenyl methane | Appearance : Viscous brownish liquid | Viscosity @ 60oC (mPa s) : 1,400 – 2,000

Posted in PO PM Industry

Lapox AH-618 (K-5200)

Appearance : Light yellow to brown liquid | Viscosity @ 25oC (mPa s) : 100 – 300

Posted in PO PM Industry

Lapox AH-442

Chemistry : 4,4′-Diaminodicyclohexyl methane | Appearance : Colourless transparent liquid | Melting point (oC) : 35 – 37

Posted in PO PM Industry

Lapox AH-422

Chemistry : 3,3’-Dimethyl-4,4’-diaminodicyclohexyl methane | Viscosity @ 25oC (mPa s) : 100 – 140

Posted in PO PM Industry

Lapox ARBMI-11 | aerospace, Bismaleimide resin, excellent thermal stability

Colour (Gardner) : Yellow powder | Melting point (oC) : 155 – 158

Posted in PO PM Industry

Lapox ARBZ-11 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability

Colour (Gardner) : Yellow solid | Viscosity @ 125oC (mPa s) : 50 – 500

Posted in PO PM Industry

Lapox ARBZ-10 A 75 | aerospace, benzoxazine resin, 75% solution in acetone

Colour (Gardner) : Yellowish liquid | Solid content (%) : 74 – 76 | Viscosity @ 25oC (mPa s) : 100 – 400

Posted in PO PM Industry

Lapox ARBZ-10 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability

Colour (Gardner) : Yellow solid | Viscosity @ 100oC (mPa s) : 1,000 – 7,000 | Softening point (oC) : 60 – 80

Posted in PO PM Industry

Lapox ARTF-50

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 4.17 – 4.44 | Viscosity @ 85oC (mPa s) : 1,000 – 1,500

Posted in PO PM Industry

Lapox ARTF-38 | aerospace, multifunctional resin, distilled unmodified resin, m-amino phenol based, high performance

Epoxy value (Eq/kg) : 9.80 – 10.6 | Viscosity @ 25oC (mPa s) : 1,500 – 4,800

Posted in PO PM Industry

Lapox ARTF-37 | aerospace, multifunctional resin, unmodified resin, m-amino phenol based, high performance

Epoxy value (Eq/kg) : 9.10 – 9.80 | Viscosity @ 25oC (mPa s) : 7,000 – 13,000

Posted in PO PM Industry

Lapox ARTF-36 | aerospace, multifunctional resin, distilled unmodified resin, p-amino phenol based, high performance

Epoxy value (Eq/kg) : 9.40 – 10.50 | Viscosity @ 25oC (mPa s) : 550 – 850

Posted in PO PM Industry

Lapox ARTF-35 | aerospace, multifunctional resin, unmodified resin, p-amino phenol based, high performance

Epoxy value (Eq/kg) : 8.70 – 9.50 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000

Posted in PO PM Industry

Lapox ARTF-34 | aerospace, multifunctional resin, specialty resin, triphenol methane based, high performance

Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 5.88 – 6.66 | Viscosity @ 150oC (mPa s) : 30 – 55

Posted in PO PM Industry

Lapox ARTF-33 | aerospace, multifunctional resin, specialty resin, ethyl substituted MDA based, high performance

Colour (Gardner) : Max 7 | Epoxy value (Eq/kg) : 7.52 – 8.47 | Viscosity @ 25oC (mPa s) : 7,000 – 12,000

Posted in PO PM Industry

Lapox ARTF-23

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 8.55 – 9.00 | Viscosity @ 50oC (mPa s) : 3,000 – 6,000

Posted in PO PM Industry

Lapox ARTF-18 | aerospace, multifunctional resin, high viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000-19,000

Posted in PO PM Industry

Lapox ARTF-17 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 17,000-19,000

Posted in PO PM Industry

Lapox ARTF-16 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 13,000-15,000

Posted in PO PM Industry

Lapox ARTF-14 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 10,000 – 12,000

Posted in PO PM Industry

Lapox ARTF-13 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000 – 11,000

Posted in PO PM Industry

Lapox ARPN-56 | aerospace, Epoxy Phenol Novolac resin, solid resin, functionality of 5.6

Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.12 – 6.10 | Viscosity @ 50oC (mPa s) : 100 – 350

Posted in None

Lapox ARPN-25 | aerospace, Epoxy Phenol Novolac resin, low viscosity, average functionality, functionality of 2.5

Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.59 – 5.81 | Viscosity @ 52oC (mPa s) : 1,100 – 1,700

Posted in PO PM Industry

Lapox ARN-16 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, medium viscosity

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 6.50 – 7.50 | Viscosity @ 50oC (mPa s) : 1,000 – 2,500 | Hycl : Max 0.20

Posted in PO PM Industry

Lapox ARL-15 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, low viscosity

Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,000

Posted in PO PM Industry

Lapox ARL-12 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.26 – 5.55 | Viscosity @ 25oC (mPa s) : 9,000 – 12,000

Posted in PO PM Industry

Lapox P-5 (ARP-17) | Bisphenol-A based solid resins, type 7, stoving lacquers, can coating, tube coating

Epoxy value (Eq/kg) : 0.53 – 0.59 | Viscosity @ 25oC (mPa s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120

Posted in PO PM Industry

Lapox K-541 (AH-541) | phenalkamine curing agent, high viscosity, marine coating, industrial coatings, protective coatings

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 15,000 – 35,000 | Amine value (mg KOH/g) : 290 – 325 | Pot life @ 25oC (minutes) : 40 – 85 | Mixing ratio (Parts by weight)

Posted in None

Lapox K-540 (AH-540) | phenalkamine curing agent, low viscosity, marine coatng, industrial coating, maintenance coating, protective coatings

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Amine value (mg KOH/g) : 490 – 550 | Pot life @ 25oC (minutes) : 30 – 55 | Mixing ratio (Parts by weight)

Posted in None

Lapox AH-543 (XH-80) | phenalkamine curing agent, low colour, low viscosity, heavy duty anti-corrosive coatings , marine applications, protective coatings

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Amine value (mg KOH/g) : 300 – 350 | Pot life @ 25oC (minutes) : 50 – 65 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-420 (K-964) | cycloaliphatic amine curing agent, very low viscosity, moderate pot life, flooring, better chemical resistance, protective coatings

Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-411 | unmodified cycloaliphatic amine curing agent, coatings, flooring applications, composite applications, protective coatings

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23

Posted in PO PM Industry

Lapox XH-61 (AH-321) | modified polyamine adduct solution, solution in xylene and butanol, clear coating, protective coating

Colour : Max 2 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000 | Amine value (Eq/kg) : 165 – 210 | Pot life @ 25oC (hours) : 4 – 6 | Mixing ratio (Parts by weight) : 30

Posted in PO PM Industry

Lapox K-306 | Butylated melamine formaldehyde curing agent, enamel, polyester film coating, protective coating

Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)

Posted in PO PM Industry

Lapox K-105 | coal tar modified polyamine adduct, high build coatings, protective coating

Colour (Gardner) : Black | Viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : Min 20 | Mixing ratio (Parts by weight) : 100 (with resin ARB – 28)

Posted in PO PM Industry

Lapox K-54 (AH-356) | modified polyamine adduct, slids coating, mortar, adhesives, protective coating

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 2,900 – 3,600 | Amine value (mg KOH/g) : 398 – 415 | Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox K-48 (AH-319) | modified polyamine curing agent, low vapour pressurehigh reactivity, adhesives, composites, castings, coatings, protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 200 – 300 | Amine value (Eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) :

Posted in PO PM Industry

Lapox K-7 | unmodified aliphatic polyamine curing agent, adhesives, castings, coatings, composites, protective coating

Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12

Posted in PO PM Industry

Lapox K-6 | unmodified aliphatic polyamine curing agent, casting, coatings, composites, protective coating

Colour (Gardner) : Max 3 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 10 – 12

Posted in PO PM Industry

Lapox AH-371 to AH-373 | modified polyamine curing agent, crack-filling, stone coating, mortar, adhesive, protective coating

Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : 100 – 550 | Amine value (mg KOH/g) : 500 – 1,000 | Pot life @ 25oC (minutes) : 5 – 30 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-351 | modified polyamine curing agent, chemical resistance, sulphuric acid resistance, protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-348 | unmodified aliphatic polyamine curing ag nr, flexible casting, transparent casting, coatings, protective coating

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-341 | modified aliphatic polyamine curing agent, solids coating, long pot life, protective coating

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-313 | unmodified aliphatic polyamine curing agent, adhesives, casting, coating, composite applications, protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15

Posted in PO PM Industry

Lapox K-92 | Aromatic amine, ambient cure modified curing agent, chemical resistant coating, tank lining, flooring, protective coating

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 5,000 – 7,500 | Amine value (Eq/kg) : 4.40 – 5.10 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Industry

Lapox ARL-143 | AH-335 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 85 – 95 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Industry

Lapox ARL-143 | AH-319 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Industry

Lapox ARCH-13 | Cycloaliphatic resins, higher toughness, outdoor coating, electrical casting, flooring, protective coating

Colour (APHA) : Max 100 | Epoxy value (Eq/kg) : 4.16 – 4.54 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000

Posted in PO PM Industry

Lapox ARF-15 | Bisphenol-F based resin, very low viscosity, distilled version, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 6.00 – 6.40 | Viscosity @ 25oC (mPa s) : 1,200 – 1,600

Posted in PO PM Industry

Lapox ARF-14 | Bisphenol-F based resin, high viscosity, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.30 | Viscosity @ 25oC (mPa s) : 5,000 – 7,000

Posted in None

Lapox ARF-13 | Bisphenol-F based resin, medium viscosity, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 3,300 – 4,100

Posted in None

Lapox ARF-12 | Bisphenol-F based resin, low viscosity, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 2,000 – 3,000

Posted in None

Lapox ARF-11 (XR-40) | standard Bisphenol-F based resin, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.70 – 6.30 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000

Posted in PO PM Industry

Lapox P-122 (ARP-14 A) | Bisphenol-A based solid resins, functional powder coating, rebar coating, protective coating

Epoxy value (Eq/kg) : 1.07 – 1.16 | Viscosity @ 25oC (mPa s) : 620 – 900 | Softening point (oC) : 100 – 110

Posted in None

Lapox P-62 (ARP-13) | Bisphenol-A based solid resins, standard solid resin, powder coating, protective coating

Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) : 95 – 101

Posted in PO PM Product

Lapox ARPN-36 | K-86 | industrial, prepregs and laminating systems, compressed laminate system, B-stage prepreg

Mixing ratio (Parts by weight) : 100 : 3-6 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 180

Posted in PO PM Industry

Lapox ARPN-36 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, very high Tg, very high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 32-40 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 170 – 185

Posted in PO PM Industry

Lapox L-247 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, general purpose system, fire retardant

Mixing ratio (Parts by weight) : 100 : 64 : 1-3 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Industry

Lapox L-12 | K-24 | industrial, filament winding and pultrusion, hot cure system, low viscosity system, long pot life, high chemical resistance, high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 34 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 145 – 155

Posted in PO PM Industry

Lapox L-12 | K-12 K-13 | industrial, filament winding and pultrusion, hot cure system, standard system, fast reactivity

Mixing ratio (Parts by weight) : 100 : 100 : 1-3 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 95 –

Posted in PO PM Industry

Lapox L-12 | AH-667 | industrial, filament winding and pultrusion, hot cure system, high chemical resistance, high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 27 | Mix viscosity @ 50oC (mPa s) : 3,000 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Industry

Lapox L-12 | AH-113 | K-13 | industrial, filament winding and pultrusion, hot cure system, flame retardancy

Mixing ratio (Parts by weight) : 100 : 95 : 0.5-2.0 | Mix viscosity @ 25oC (mPa s) : 1,900 – 2,100 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 165 –

Posted in PO PM Industry

Lapox ARL-136 | AH-126 | industrial, filament winding and pultrusion, hot cure system, superior fiber wetting, excellent mechanical properties, good surface finish

Mixing ratio (Parts by weight) : 100 : 90 | Mix viscosity @ 25oC (mPa s) : 300 – 600 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 125

Posted in PO PM Industry

Lapox ARF-11 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, non-crystallisable, excellent chemical resistance

Mixing ratio (Parts by weight) : 100 : 90 : 1-3 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 –

Posted in PO PM Industry

Lapox ARCH-11 | K-3 | K-13 | industrial, filament winding and pultrusion, hot cure system, out door application, UV resistance

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 105 –

Posted in PO PM Industry

Lapox L-12 | AH-337 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) oC : 90 – 105

Posted in PO PM Industry

Lapox L-12 | AH-336 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) oC : 90 – 105

Posted in PO PM Industry

Lapox L-12 | AH-335 | industrial, filament winding and pultrusion, ambient cure system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) oC : 90 – 105

Posted in PO PM Industry

Lapox L-12 | AH-315 | industrial, filament winding and pultrusion, ambient cure system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 800 | Pot life @ 25oC (minutes) : 7 – 9 hr | Glass transition temperature (Tg) oC : 85 –

Posted in PO PM Industry

Lapox ARL-12 | AH-714 | industrial, filament winding and pultrusion, ambient cure system, superior adhesion, toughness

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 1,200 – 1,500 | Pot life @ 25oC (minutes) : 120 – 150 | Glass transition temperature (Tg) oC : 55 – 65

Posted in PO PM Industry

Lapox ARL-125 | AH-332 | aerospace, RTM, hand lay-up, infusion, long pot life, high Tg, high glass transition temperature

Mixing ratio (Parts by weight) : 100:32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox ART-24 | AH-326 | automotive, tooling, gel coat system

Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115

Posted in PO PM Industry

Lapox ART-23 | AH-326 | automotive, tooling, gel coat system

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ART-21 | AH-326 | automotive, tooling, gel coat system

Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-135 LV | AH-411 | automotive, RTM, hand lay-up and infusion systems, very low viscosity, high Tg, high glass trransition temperature

Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (mPa s) : 250 – 400 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 125 – 135

Posted in PO PM Industry

Lapox ARL-135 LV | AH-333 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox B-7 | semi-solid, can coating, coil coating, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 3.57 – 4.45 | Viscosity @ 25oC (mPa s) : 450 – 800

Posted in None

Lapox ARL-135 LV | AH-332 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox P-10 (ARP-14 E) | Bisphenol-A based solid resins, esterifcation, anodic electrodeposition

Epoxy value (Eq/kg) : 1.08 – 1.18 | Viscosity @ 25oC (mPa s) : 430 – 550 | Softening point (oC) : 90 – 100

Posted in PO PM Industry

Lapox ARP-14 HF | Bisphenol-A based solid resins, modified resin, powder coating, better flow

Epoxy value (Eq/kg) : 1.23 – 1.33 | Viscosity @ 25oC (mPa s) : 480 – 580 | Softening point (oC) : 80 – 90

Posted in None

Lapox ARP-13 LV | Bisphenol-A based solid resins, hybrid powder coating

Epoxy value (Eq/kg) : 1.33 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 600 | Softening point (oC) : 95 – 101

Posted in None

Lapox ARL-160 | AH-359 | automotive, prepreg system, FRP structural component

Mixing ratio (Parts by weight) : 100 : 5 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Industry

Lapox ARL-159 | AH-357 | AC-22 | automotive, prepreg system, hot melt prepreg system, very high Tg, very high glass transition temperature,

Mixing ratio (Parts by weight) : 100 : 15 : 2 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 155 – 165

Posted in PO PM Industry

Lapox L-68 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, FR-4 laminate

Mixing ratio (Parts by weight) : 100 : 32 : 1-3 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Industry

Lapox L-67 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, G-10 laminate

Mixing ratio (Parts by weight) : 100 : 23 : 0.5-3.0 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Industry

Lapox ARP-13 HT | Bisphenol-A based solid resins, powder coating

Epoxy value (Eq/kg) : 1.25 – 1.35 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 | Glass transition temperature (Tg) (oC) : 55

Posted in None

Lapox L-12 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, shelf life upto 6 month, G-11 laminate

Mixing ratio (Parts by weight) : 100 : 35 : 1-3 | Pot life @ 25oC (weeks) : 6 – 8 weeks | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Industry

Lapox ARP-12 | Bisphenol-A based solid resins, medium molecular weight, powder coating

Epoxy value (Eq/kg) : 1.42 – 1.53 | Viscosity @ 25oC (mPa s) : 375 – 475 | Softening point (oC) : 80 – 90

Posted in PO PM Industry

Lapox AC-14 (K-65) | accelerator and catalysts, liquid tertiary amine, accelerate anhydrides, accelerate polyamides, accelerate amines

Appearance : Clear yellow liquid | Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 580 – 635

Posted in PO PM Industry

Lapox L-12 | K-5 | automotive, prepregs and laminating systems, compressed laminate, prepreg, shorter shelf life, G-10 laminate, G-11 laminate

Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (hours) : > 4 | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Industry

Lapox K-302 | modified polyamine, curing agent, self-leveling flooring, solvent-free coating, clear casting

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 300 – 600 | Amine value (mg KOH/g) : 260 – 310 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-440 | Cycloaliphatic amine, curing agent, accelerated curing agent, solvent-free coating, flooring

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 335 – 375 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-428 | Cycloaliphatic amine, curing agent, low viscosity, fast reactivity, self-leveling, high gloss, colour stability

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 50 – 150 | Amine value (mg KOH/g) : 340 – 390 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox L-12 | K-918 | K-13 | automotive, filament winding and pultrusion system, hot cure

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 600 – 900 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 130 –

Posted in PO PM Industry

Lapox AH-424 | Cycloaliphatic amine, curing agent, self-leveling flooring, high filler loading

Colour (Gardner) : Max 2 | Amine value (mg KOH/g) : 330 – 360 | Pot life @ 25oC (minutes) : 20 – 50 | Mixing ratio (Parts by weight) : 45

Posted in PO PM Industry

Lapox L-12 | AH-422 | automotive, filament winding and pultrusion system, long pot life, high glass transition temperature, high Tg, ambient cure

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 1,500 – 2,500 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Industry

Lapox AH-416 | Cycloaliphatic amine, curing agent, moderate viscosity, transparent, high gloss, self-leveling flooring

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 400 – 600 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 30 – 45 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-727 | curing agent, Polyamide, curing under wet/damp, excellent adhesion, adhesion with metal, adhesion with concrete, primer, coatings

Colour (Gardner) : Max 12 | Viscosity @ 25oC (mPa s) : 1,000 – 2,000 | Amine value (mg KOH/g) : 280 – 300 | Pot life @ 25oC (minutes) : 46 – 65 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-716 (K-29) | curing agent, Polyamide, low viscosity, solids coating, primer, floor coating

Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa s) : 2,500 – 5,500 | Amine value (mg KOH/g) : 202 – 225 | Pot life @ 25oC (minutes) : 80 – 100 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox ARL-135 LV | AH-337 | automotive, filament winding and pultrusion system, low viscosity, variable pot life, ambient cure

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox AH-714 | curing agent, Polyamide, low viscosity, grout, crack injection, primer, protective coating, tile gap filling, adhesive, mortar

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 425 – 450 | Pot life @ 25oC (minutes) : 120 – 130 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox ARL-135 LV | AH-336 | automotive, filament winding and pultrusion system, variable pot life, ambient cure

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox AH-713 (K-46) | curing agent, Polyamide, moderate viscosity, solids coating, primer, grout, mortar, adhesive, marine coating, industrial paints

Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 12,000 – 18,000 | Amine value (mg KOH/g) : 350 – 400 | Pot life @ 25oC (minutes) : 60 – 80 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox ARL-135 LV | AH-335 | automotive, filament winding and pultrusion system, variable pot life, ambient cure

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox AH-712 | curing agent, Polyamide, high viscosity, protective coating, adhesive, flooring, marine coating, industrial paint

Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 45,000 – 60,000 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 110 – 130 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox ART-22 | AH-326

Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95

Posted in PO PM Industry

Lapox ARL-140 | AH-419

Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220

Posted in PO PM Industry

Lapox ARL-138 | AH-417 | aerospace, tooling, laminating system, low viscosity system, high Tg, high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 100 – 110

Posted in PO PM Industry

Lapox AH-711 | curing agent, Polyamide, high viscosity, adhesive, sealant

Colour (Gardner) : Max 9 | Viscosity @ 40oC (mPa s) : 50,000 – 75,000 | Amine value (mg KOH/g) : 210 – 230 | Mixing ratio (Parts by weight) : 100 – 125

Posted in PO PM Industry

Lapox K-49 | Aromatic amine, low viscosity, moderate reactivity, solvent-free coating, chemical resistant coating, floorings, linings

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 700 – 900 | Amine value (Eq/kg) : 4.70 – 5.00 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Industry

Lapox ARL-138 | AH-339 | aerospace, laminating system, high Tg, high glass transition temperature, dimensional stability at high temperature

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Industry

Lapox K-42 | Aromatic amine, curing agent, low viscosity, high reactive

Appearance : Dark brown liquid | Colour (Gardner) : Max 16 | Viscosity @ 25oC (mPa s) : 15,000 – 21,000 | Amine value (Eq/kg) : 4.40 – 4.80 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Industry

Lapox K-41 | Aromatic amine, curing agent, low viscosity, chemical resistant, industrial flooring, coatings, tank linings

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 3,800 – 5,800 | Amine value (Eq/kg) : 4.70 – 5.10 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Industry

Lapox XR-128 | Solvent cut resins, high molecular weight, primer, enamel, flexibility

Epoxy value (Eq/kg) : Max 0.08 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Non-volatile content (%) : 49 – 51 (160oC/2h)

Posted in PO PM Industry

Lapox P-101 HV | Solvent cut resins, type 1 solution, paint and coatings

Epoxy value (Eq/kg) : 1.80 – 2.20 | Viscosity @ 25oC (mPa s) : 14,000 – 20,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)

Posted in PO PM Industry

Lapox P-101 | Solvent cut resins, type 1 solution, paint and coatings

Epoxy value (Eq/kg) : 1.90 – 2.20 | Viscosity @ 25oC (mPa s) : 9,000 – 13,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)

Posted in PO PM Industry

Lapox B-7 X 80 | Solvent cut resins, solids coating, excellent adhesion, gloss, flexibility

Epoxy value (Eq/kg) : 3.10 – 3.40 | Viscosity @ 25oC (mPa s) : 600 – 850 | Non-volatile content (%) : 79 – 81 (150oC/1h)

Posted in PO PM Industry

Lapox ARPN-54 | modified epoxy phenol novolac resins, composite applications, electrical applications, coating applications, industrial coating

Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.50 – 6.00 | Viscosity @ 25oC (mPa s) : 25,000 – 35,000

Posted in PO PM Industry

Lapox ARPN-36 X 80 | Epoxy phenol novolac resins, epoxy phenol novolac solution, chemical resistant coating, electrical applications, composite applications, industrial coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 800 – 1,500 | Non-volatile content (%) :79 – 81 (150oC/1h)

Posted in PO PM Industry

Lapox ARPN-36 M 80 | Epoxy phenol novolac resins, epoxy phenol novolac solution, chemical resistant coating, electrical applications, composite applications, industrial coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 150 – 350 | Non-volatile content (%): 79 – 81 (105oC/2h)

Posted in PO PM Industry

Lapox ARL-135 | AH-337 | aerospace, RTM, hand lay-up, infusion, low viscosity system, high Tg, high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-135 | AH-336

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-135 | AH-335

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-135 | AH-334 GL

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox ARL-135 | AH-333

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox ARL-135 | AH-332

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox L-12 | AH-411

Mixing ratio (Parts by weight) : 100 : 22 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 140 – 155

Posted in PO PM Industry

Lapox ARL-158 | AH-419

Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 170 – 200

Posted in PO PM Industry

Lapox ARL-135 LV | AH-422

Mixing ratio (Parts by weight) : 100 : 35 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Industry

Lapox ARL-125 | AH-368

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 350 – 450 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-125 | AH-367 GL

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-125 | AH-365 GL

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-125 | AH-336

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-125 | AH-335

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-125 | AH-334

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox ARL-125 | AH-333

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox ARL-160 | AH-357 | AC-22 | aerospace, hot melt prepreg system, structural component, sporting goods, engineering application

Mixing ratio (Parts by weight) : 100 : 15 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Industry

Lapox ARL-159 | AH-619 | structural component, high temperature performance, defence, engineering application

Mixing ratio (Parts by weight) : 100 : 40 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 180 – 200

Posted in PO PM Industry

Lapox K-112 | accelerator and catalysts, Modified viscous tertiary amine, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating

Appearance : Clear brown liquid | Viscosity @ 25oC (mPa s) : 1,000 – 1,800

Posted in PO PM Industry

Lapox K-86 | accelerator and catalysts, Solid polyamine complex, accelerate aromatic amines

Appearance : White crystalline powder | Melting point (oC) : Min 75

Posted in PO PM Industry

Lapox AC-20 | accelerator and catalysts, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating

Appearance : Brown liquid or solid | Viscosity @ 25oC (mPa s) : Max 100 | Melting point (oC) : 36 – 42

Posted in PO PM Industry

Lapox AC-19 | accelerator and catalysts, Liquid low reactive triamine, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating

Appearance : Clear liquid | Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 30

Posted in PO PM Industry

Lapox AC-13 | accelerator and catalysts, Liquid triamine, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating

Appearance : Clear liquid | Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : Max 10

Posted in PO PM Industry

Lapox AC-11

Appearance : White crystal | Melting point (oC) : Min 127 – 134

Posted in PO PM Industry

Lapox AC-10

Appearance : White crystal | Melting point (oC) : 154 – 156

Posted in PO PM Industry

Lapox ARPN-36 (L-238) | Epoxy phenol novolac resins, semi-solid, comosites, electrical, chemical resistant coating, floorings, industrial coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.70 | Viscosity @ 52oC (mPa s) : 20,000 – 50,000

Posted in PO PM Industry

Lapox ARD-59

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 6.20 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox K-450

Chemistry : 3,3′-Diethyl-4,4′-diaminodiphenyl methane| Appearance : Dark brown liquid | Viscosity @ 40oC (mPa s) : 250 – 400

Posted in PO PM Industry

Lapox K-5 | aerospace, curing agent, aromatic amine, elevated temperature curing, high glass transition temperature

Chemistry : 4,4′-Diaminodiphenyl methane | Appearance : White to tan pastilles | Melting point (oC) : 88 – 92

Posted in PO PM Industry

Lapox ARFM-13 (XR-60) | Bisphenol-A/F blends, low viscosity, coating, composites, floor coating, construction

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.75 | Viscosity @ 25oC (mPa s) : 4,500 – 6,500

Posted in PO PM Industry

Lapox ARFM-12 (XR-123) | Bisphenol-A/F blends, Medium viscosity, coating, composites, floor coating, construction

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.55 – 5.80 | Viscosity @ 25oC (mPa s) : 6,500 – 8,500

Posted in PO PM Industry

Lapox B-47 | Bisphenol-A based modified liquid epoxy resin, high gloss, heavy duty flooring, solids coating, grout, crack-filling

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 5.50 | Viscosity @ 25oC (mPa s) : 450 – 650

Posted in PO PM Industry

Lapox ARB-33 | Bisphenol-A based modified liquid epoxy resin, primer, mortar, grout, maintenance

Colour (Gardner) : Max 1 | Colour (AHPA) : Max 75 | Epoxy value (Eq/kg) : 5.12 – 5.55 | Viscosity @ 25oC (mPa s) : 500 – 700

Posted in PO PM Industry

Lapox ARB-32 | Bisphenol-A based modified liquid epoxy resin

Colour (Gardner) : Max 1 | Colour (APHA) : Max 150 | Epoxy value (Eq/kg) : 4.65 – 5.12 | Viscosity @ 25oC (mPa s) : 500 – 700

Posted in PO PM Industry

Lapox ARB-30 | Bisphenol-A based modified liquid epoxy resin, primer, mortar, floor coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 4,500 – 5,500

Posted in PO PM Industry

Lapox ARD-60

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 7.00 – 7.80 | Viscosity @ 25oC (mPa s) : 10 – 22 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARB-28 | Bisphenol-A based modified liquid epoxy resin, primer, mortar, floor coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000

Posted in PO PM Industry

Lapox ARB-26 | Bisphenol-A based modified liquid epoxy resin, floor coating, high gloss, defect free surface

Colour (Gardner) : Milky white liquid | Epoxy value (Eq/kg) : 4.80 – 5.10 | Viscosity @ 25oC (mPa s) : 550 – 750

Posted in PO PM Industry

Lapox ARB-22 (XR-118) | Bisphenol-A based modified liquid epoxy resin, primer, mortar, floor coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.90 – 5.20 | Viscosity @ 25oC (mPa s) : 800 – 1,200

Posted in PO PM Industry

Lapox B-11 | standard viscosity, Bisphenol-A based unmodified liquid epoxy resin, LER, BLR

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000

Posted in PO PM Industry

Lapox B-9 | low viscosity, Bisphenol-A based unmodified liquid epoxy resin

Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 8,000 – 11,000

Posted in PO PM Industry

Lapox ARL-141 | high viscosity, Bisphenol-A based unmodified liquid epoxy resin, high reactivity

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.30 – 4.70 | Viscosity @ 25oC (mPa s) : 20,000 – 28,000

Posted in PO PM Industry

Lapox AR-101 | standard viscosity, Bisphenol-A based unmodified liquid epoxy resin

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000

Posted in PO PM Industry

Lapox P-6 (ARP-19) | type 9, can coating, coil coating

Epoxy value (Eq/kg) : 0.34 – 0.42 | Viscosity @ 25oC (mPa s) : 5,000 – 10,000 | Softening point (oC) : 125 – 140

Posted in PO PM Industry

Lapox ASH-11 MIC | curing agent, sulfone, 3,3′-Diaminodiphenyl sulfone Micronised, uniform dispersion in solvent-free resin, micronised ASH-11, powder

Chemistry : 3,3′-Diaminodiphenyl sulfone Micronised | Appearance : Off-white to yellowish brown powder | Melting point (oC) : 167 – 175

Posted in None

Lapox P-4 (ARP-14) | type 4, enamels, can coating, tube coating

Epoxy value (Eq/kg) : 1.12 – 1.20 | Viscosity @ 25oC (mPa s) : 550 – 700 | Softening point (oC) : 90 – 102

Posted in PO PM Industry

Lapox ARA-32 | AH-732

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARA-32 | AH-733

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 50 – 70 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARA-32 | AH-734

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARA-32 | AH-735

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 130 – 170 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox A-83 | K-83 | standard adhesive, gap filling, construction adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 35 – 45

Posted in PO PM Industry

Lapox ARA-30 | AH-735 | structural adhesive, high lap shear strength, general purpose

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 35 – 50

Posted in PO PM Industry

Lapox ARA-17 | AH-354 | toughness, quick, mechanical strength, general purpose

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10

Posted in PO PM Industry

Lapox A-16 | K-6 | marble, crack sealing, bonding, frame, construction adhesive

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 4,000 – 6,000 | Pot life @ 25oC (minutes) : 20 – 30

Posted in PO PM Industry

Lapox C-51 | K-6 | electrical adhesive

Type of system : Unfilled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 10 | Glass transition temperature (Tg) (oC) : 60 – 70

Posted in PO PM Industry

Lapox XR-110 | XH-68 | cable joints, construction adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Industry

Lapox ARA-12 | AH-718 | multi-purpose, zari, speaker, marble, ceramic, construction adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 32,000 – 37,000 | Pot life @ 25oC (minutes) : 90 – 105

Posted in PO PM Industry

Lapox A-555 | K-555 | toughness, quick, mechanical strength, construction adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10

Posted in PO PM Industry

Lapox A-53 | K-6 | marble, steel, metal, construction adhesive

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 30 – 60

Posted in PO PM Industry

Lapox A-35 | K-35 | solvent based, excellent mechanical properties, construction adhesive

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 500 | Pot life @ 25oC (minutes) : > 60

Posted in PO PM Industry

Lapox A-31 | AH-717 | bonding, high shear strength, construction adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 25,000 – 40,000 | Pot life @ 25oC (minutes) : 40 – 80

Posted in PO PM Industry

Lapox A-16 | K-5 | joints, hot cure, high temperature, construction adhesive

Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (minutes) : 170 – 190

Posted in PO PM Industry

Lapox A-16 | AH-800 | rapid cure, similar substrate, dissimilar substrate, construction adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 3 – 7

Posted in PO PM Industry

Lapox A-16 | AH-717 | marble, ceramic, metal, concrete, shock resistant, vibration resistant, construction adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 15,000 – 20,000 | Pot life @ 25oC (minutes) : 150 – 200

Posted in PO PM Industry

Lapox ARL-143 | AH-335 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; varying pot life; fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Pot life @ 25oC (minutes) : 85 – 95 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Product

Lapox ARL-143 | AH-319 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; varying pot life; fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Product

Lapox ARL-135LV | AH-422 | industrial; RTM; hand lay-up and infusion systems; long pot life; high Tg; high glass trransition temperature

Mixing ratio (Parts by weight) : 100 : 35 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Product

Lapox ARL-135LV | AH-411 | industrial; RTM; hand lay-up and infusion systems; very low viscosity; high Tg; high glass trransition temperature

Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (mPa s) : 250 – 400 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 125 – 135

Posted in PO PM Product

Lapox ARL-135 LV | AH-334 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARL-135 LV | AH-333 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1,200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox ARL-135 LV | AH-332 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARL-135 | AH-337 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product
Scroll Up