Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50
Updates
Author: atul
Lapox B-47 | AH-416 | Maintenance, self-leveling system, low viscosity system, excellent gloss, excellent hardness, moderate chemical resistance
Posted in PO PM Industry
Lapox B-11 | AH-428 | Maintenance, self-leveling system, moderate viscosity system, excellent gloos, good chemical resistance, construction
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40
Posted in PO PM Industry
Lapox ARB-26 | AH-416 | Maintenance, self-leveling system, low viscosity system, high gloss finish
Mixing ratio (Parts by weight) :100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50
Posted in PO PM Industry
Lapox ARB-22 | AH-428 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction
Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35
Posted in PO PM Industry
Lapox ARB-22 | AH-416 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction
Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60
Posted in PO PM Industry
Lapox B-47 | K-41 | K-42 | Maintenance, mortar, screed, varying pot life, excellent chemical resistance, construction
Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330
Posted in PO PM Industry
Lapox B-47 | AH-713 | Maintenance, mortar, screed, standard system, system for extreme condition, screed lining, construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130
Posted in PO PM Industry
Lapox B-47 | AH-546 | Maintenance, mortar, screed, standard system, system for extreme condition, moist surface, construction
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80
Posted in PO PM Industry
Lapox ASH-11 | aerospace, curing agent, sulfone, 3,3′-Diaminodiphenyl sulfone, more reactive, fast curing, high productivity, powder
Chemistry : 3,3′-Diaminodiphenyl sulfone | Appearance : White to brownish white powder | Melting point (oC) : 167 – 175
Posted in None
Lapox ASH-10 MIC | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Micronised, micronised ASH-10, uniform dispersion in solvent-free resin, powder
Chemistry : 4,4′-Diaminodiphenyl sulfone Micronised | Appearance : White to off-white powder | Melting point (oC) : 176 – 180
Posted in None
Lapox ASH-10 FF | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Free Flow, Free flowin ASH-10, easy operation , easy handling, powder
Chemistry : 4,4′-Diaminodiphenyl sulfone Free Flow | Appearance : White to off-white powder | Melting point (oC) : 176 – 185
Posted in None
Lapox ASH-10 | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone, extremely slow reactivity, prepreg, advance composite, powder
Chemistry : 4,4′-Diaminodiphenyl sulfone | Appearance : White to off-white powder | Melting point (oC) : 176 – 185
Posted in None
Lapox AH-667
Chemistry : 4,4′-Diaminodiphenyl methane | Appearance : Viscous brownish liquid | Viscosity @ 60oC (mPa s) : 1,400 – 2,000
Posted in PO PM Industry
Lapox AH-618 (K-5200)
Appearance : Light yellow to brown liquid | Viscosity @ 25oC (mPa s) : 100 – 300
Posted in PO PM Industry
Lapox AH-442
Chemistry : 4,4′-Diaminodicyclohexyl methane | Appearance : Colourless transparent liquid | Melting point (oC) : 35 – 37
Posted in PO PM Industry
Lapox AH-422
Chemistry : 3,3’-Dimethyl-4,4’-diaminodicyclohexyl methane | Viscosity @ 25oC (mPa s) : 100 – 140
Posted in PO PM Industry
Lapox ARBMI-11 | aerospace, Bismaleimide resin, excellent thermal stability
Colour (Gardner) : Yellow powder | Melting point (oC) : 155 – 158
Posted in PO PM Industry
Lapox ARBZ-11 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability
Colour (Gardner) : Yellow solid | Viscosity @ 125oC (mPa s) : 50 – 500
Posted in PO PM Industry
Lapox ARBZ-10 A 75 | aerospace, benzoxazine resin, 75% solution in acetone
Colour (Gardner) : Yellowish liquid | Solid content (%) : 74 – 76 | Viscosity @ 25oC (mPa s) : 100 – 400
Posted in PO PM Industry
Lapox ARBZ-10 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability
Colour (Gardner) : Yellow solid | Viscosity @ 100oC (mPa s) : 1,000 – 7,000 | Softening point (oC) : 60 – 80
Posted in PO PM Industry
Lapox ARTF-50
Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 4.17 – 4.44 | Viscosity @ 85oC (mPa s) : 1,000 – 1,500
Posted in PO PM Industry
Lapox ARTF-38 | aerospace, multifunctional resin, distilled unmodified resin, m-amino phenol based, high performance
Epoxy value (Eq/kg) : 9.80 – 10.6 | Viscosity @ 25oC (mPa s) : 1,500 – 4,800
Posted in PO PM Industry
Lapox ARTF-37 | aerospace, multifunctional resin, unmodified resin, m-amino phenol based, high performance
Epoxy value (Eq/kg) : 9.10 – 9.80 | Viscosity @ 25oC (mPa s) : 7,000 – 13,000
Posted in PO PM Industry
Lapox ARTF-36 | aerospace, multifunctional resin, distilled unmodified resin, p-amino phenol based, high performance
Epoxy value (Eq/kg) : 9.40 – 10.50 | Viscosity @ 25oC (mPa s) : 550 – 850
Posted in PO PM Industry
Lapox ARTF-35 | aerospace, multifunctional resin, unmodified resin, p-amino phenol based, high performance
Epoxy value (Eq/kg) : 8.70 – 9.50 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000
Posted in PO PM Industry
Lapox ARTF-34 | aerospace, multifunctional resin, specialty resin, triphenol methane based, high performance
Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 5.88 – 6.66 | Viscosity @ 150oC (mPa s) : 30 – 55
Posted in PO PM Industry
Lapox ARTF-33 | aerospace, multifunctional resin, specialty resin, ethyl substituted MDA based, high performance
Colour (Gardner) : Max 7 | Epoxy value (Eq/kg) : 7.52 – 8.47 | Viscosity @ 25oC (mPa s) : 7,000 – 12,000
Posted in PO PM Industry
Lapox ARTF-23
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 8.55 – 9.00 | Viscosity @ 50oC (mPa s) : 3,000 – 6,000
Posted in PO PM Industry
Lapox ARTF-18 | aerospace, multifunctional resin, high viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000-19,000
Posted in PO PM Industry
Lapox ARTF-17 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 17,000-19,000
Posted in PO PM Industry
Lapox ARTF-16 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 13,000-15,000
Posted in PO PM Industry
Lapox ARTF-14 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 10,000 – 12,000
Posted in PO PM Industry
Lapox ARTF-13 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance
Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000 – 11,000
Posted in PO PM Industry
Lapox ARPN-56 | aerospace, Epoxy Phenol Novolac resin, solid resin, functionality of 5.6
Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.12 – 6.10 | Viscosity @ 50oC (mPa s) : 100 – 350
Posted in None
Lapox ARPN-25 | aerospace, Epoxy Phenol Novolac resin, low viscosity, average functionality, functionality of 2.5
Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.59 – 5.81 | Viscosity @ 52oC (mPa s) : 1,100 – 1,700
Posted in PO PM Industry
Lapox ARN-16 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, medium viscosity
Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 6.50 – 7.50 | Viscosity @ 50oC (mPa s) : 1,000 – 2,500 | Hycl : Max 0.20
Posted in PO PM Industry
Lapox ARL-15 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, low viscosity
Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,000
Posted in PO PM Industry
Lapox ARL-12 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.26 – 5.55 | Viscosity @ 25oC (mPa s) : 9,000 – 12,000
Posted in PO PM Industry
Lapox P-5 (ARP-17) | Bisphenol-A based solid resins, type 7, stoving lacquers, can coating, tube coating
Epoxy value (Eq/kg) : 0.53 – 0.59 | Viscosity @ 25oC (mPa s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120
Posted in PO PM Industry
Lapox K-541 (AH-541) | phenalkamine curing agent, high viscosity, marine coating, industrial coatings, protective coatings
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 15,000 – 35,000 | Amine value (mg KOH/g) : 290 – 325 | Pot life @ 25oC (minutes) : 40 – 85 | Mixing ratio (Parts by weight)…
Posted in None
Lapox K-540 (AH-540) | phenalkamine curing agent, low viscosity, marine coatng, industrial coating, maintenance coating, protective coatings
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Amine value (mg KOH/g) : 490 – 550 | Pot life @ 25oC (minutes) : 30 – 55 | Mixing ratio (Parts by weight)…
Posted in None
Lapox AH-543 (XH-80) | phenalkamine curing agent, low colour, low viscosity, heavy duty anti-corrosive coatings , marine applications, protective coatings
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Amine value (mg KOH/g) : 300 – 350 | Pot life @ 25oC (minutes) : 50 – 65 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-420 (K-964) | cycloaliphatic amine curing agent, very low viscosity, moderate pot life, flooring, better chemical resistance, protective coatings
Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-411 | unmodified cycloaliphatic amine curing agent, coatings, flooring applications, composite applications, protective coatings
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23
Posted in PO PM Industry
Lapox XH-61 (AH-321) | modified polyamine adduct solution, solution in xylene and butanol, clear coating, protective coating
Colour : Max 2 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000 | Amine value (Eq/kg) : 165 – 210 | Pot life @ 25oC (hours) : 4 – 6 | Mixing ratio (Parts by weight) : 30…
Posted in PO PM Industry
Lapox K-306 | Butylated melamine formaldehyde curing agent, enamel, polyester film coating, protective coating
Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)
Posted in PO PM Industry
Lapox K-105 | coal tar modified polyamine adduct, high build coatings, protective coating
Colour (Gardner) : Black | Viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : Min 20 | Mixing ratio (Parts by weight) : 100 (with resin ARB – 28)
Posted in PO PM Industry
Lapox K-54 (AH-356) | modified polyamine adduct, slids coating, mortar, adhesives, protective coating
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 2,900 – 3,600 | Amine value (mg KOH/g) : 398 – 415 | Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox K-48 (AH-319) | modified polyamine curing agent, low vapour pressurehigh reactivity, adhesives, composites, castings, coatings, protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 200 – 300 | Amine value (Eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) :…
Posted in PO PM Industry
Lapox K-7 | unmodified aliphatic polyamine curing agent, adhesives, castings, coatings, composites, protective coating
Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12
Posted in PO PM Industry
Lapox K-6 | unmodified aliphatic polyamine curing agent, casting, coatings, composites, protective coating
Colour (Gardner) : Max 3 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 10 – 12
Posted in PO PM Industry
Lapox AH-371 to AH-373 | modified polyamine curing agent, crack-filling, stone coating, mortar, adhesive, protective coating
Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : 100 – 550 | Amine value (mg KOH/g) : 500 – 1,000 | Pot life @ 25oC (minutes) : 5 – 30 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-351 | modified polyamine curing agent, chemical resistance, sulphuric acid resistance, protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-348 | unmodified aliphatic polyamine curing ag nr, flexible casting, transparent casting, coatings, protective coating
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-341 | modified aliphatic polyamine curing agent, solids coating, long pot life, protective coating
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-313 | unmodified aliphatic polyamine curing agent, adhesives, casting, coating, composite applications, protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15
Posted in PO PM Industry
Lapox K-92 | Aromatic amine, ambient cure modified curing agent, chemical resistant coating, tank lining, flooring, protective coating
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 5,000 – 7,500 | Amine value (Eq/kg) : 4.40 – 5.10 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox ARL-143 | AH-335 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application
Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 85 – 95 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Industry
Lapox ARL-143 | AH-319 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application
Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Industry
Lapox ARCH-13 | Cycloaliphatic resins, higher toughness, outdoor coating, electrical casting, flooring, protective coating
Colour (APHA) : Max 100 | Epoxy value (Eq/kg) : 4.16 – 4.54 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000
Posted in PO PM Industry
Lapox ARF-15 | Bisphenol-F based resin, very low viscosity, distilled version, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 6.00 – 6.40 | Viscosity @ 25oC (mPa s) : 1,200 – 1,600
Posted in PO PM Industry
Lapox ARF-14 | Bisphenol-F based resin, high viscosity, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.30 | Viscosity @ 25oC (mPa s) : 5,000 – 7,000
Posted in None
Lapox ARF-13 | Bisphenol-F based resin, medium viscosity, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 3,300 – 4,100
Posted in None
Lapox ARF-12 | Bisphenol-F based resin, low viscosity, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 2,000 – 3,000
Posted in None
Lapox ARF-11 (XR-40) | standard Bisphenol-F based resin, constructon, composites, electrical, casting, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.70 – 6.30 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000
Posted in PO PM Industry
Lapox P-122 (ARP-14 A) | Bisphenol-A based solid resins, functional powder coating, rebar coating, protective coating
Epoxy value (Eq/kg) : 1.07 – 1.16 | Viscosity @ 25oC (mPa s) : 620 – 900 | Softening point (oC) : 100 – 110
Posted in None
Lapox P-62 (ARP-13) | Bisphenol-A based solid resins, standard solid resin, powder coating, protective coating
Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) : 95 – 101
Posted in PO PM Product
Lapox ARPN-36 | K-86 | industrial, prepregs and laminating systems, compressed laminate system, B-stage prepreg
Mixing ratio (Parts by weight) : 100 : 3-6 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 180
Posted in PO PM Industry
Lapox ARPN-36 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, very high Tg, very high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 32-40 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 170 – 185
Posted in PO PM Industry
Lapox L-247 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, general purpose system, fire retardant
Mixing ratio (Parts by weight) : 100 : 64 : 1-3 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox L-12 | K-24 | industrial, filament winding and pultrusion, hot cure system, low viscosity system, long pot life, high chemical resistance, high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 34 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 145 – 155
Posted in PO PM Industry
Lapox L-12 | K-12 K-13 | industrial, filament winding and pultrusion, hot cure system, standard system, fast reactivity
Mixing ratio (Parts by weight) : 100 : 100 : 1-3 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 95 –…
Posted in PO PM Industry
Lapox L-12 | AH-667 | industrial, filament winding and pultrusion, hot cure system, high chemical resistance, high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 27 | Mix viscosity @ 50oC (mPa s) : 3,000 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Industry
Lapox L-12 | AH-113 | K-13 | industrial, filament winding and pultrusion, hot cure system, flame retardancy
Mixing ratio (Parts by weight) : 100 : 95 : 0.5-2.0 | Mix viscosity @ 25oC (mPa s) : 1,900 – 2,100 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 165 –…
Posted in PO PM Industry
Lapox ARL-136 | AH-126 | industrial, filament winding and pultrusion, hot cure system, superior fiber wetting, excellent mechanical properties, good surface finish
Mixing ratio (Parts by weight) : 100 : 90 | Mix viscosity @ 25oC (mPa s) : 300 – 600 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 125
Posted in PO PM Industry
Lapox ARF-11 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, non-crystallisable, excellent chemical resistance
Mixing ratio (Parts by weight) : 100 : 90 : 1-3 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 –…
Posted in PO PM Industry
Lapox ARCH-11 | K-3 | K-13 | industrial, filament winding and pultrusion, hot cure system, out door application, UV resistance
Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 105 –…
Posted in PO PM Industry
Lapox L-12 | AH-337 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) oC : 90 – 105
Posted in PO PM Industry
Lapox L-12 | AH-336 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) oC : 90 – 105
Posted in PO PM Industry
Lapox L-12 | AH-335 | industrial, filament winding and pultrusion, ambient cure system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) oC : 90 – 105
Posted in PO PM Industry
Lapox L-12 | AH-315 | industrial, filament winding and pultrusion, ambient cure system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 800 | Pot life @ 25oC (minutes) : 7 – 9 hr | Glass transition temperature (Tg) oC : 85 –…
Posted in PO PM Industry
Lapox ARL-12 | AH-714 | industrial, filament winding and pultrusion, ambient cure system, superior adhesion, toughness
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 1,200 – 1,500 | Pot life @ 25oC (minutes) : 120 – 150 | Glass transition temperature (Tg) oC : 55 – 65
Posted in PO PM Industry
Lapox ARL-125 | AH-332 | aerospace, RTM, hand lay-up, infusion, long pot life, high Tg, high glass transition temperature
Mixing ratio (Parts by weight) : 100:32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ART-24 | AH-326 | automotive, tooling, gel coat system
Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115
Posted in PO PM Industry
Lapox ART-23 | AH-326 | automotive, tooling, gel coat system
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ART-21 | AH-326 | automotive, tooling, gel coat system
Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 LV | AH-411 | automotive, RTM, hand lay-up and infusion systems, very low viscosity, high Tg, high glass trransition temperature
Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (mPa s) : 250 – 400 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 125 – 135
Posted in PO PM Industry
Lapox ARL-135 LV | AH-333 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox B-7 | semi-solid, can coating, coil coating, protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 3.57 – 4.45 | Viscosity @ 25oC (mPa s) : 450 – 800
Posted in None
Lapox ARL-135 LV | AH-332 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox P-10 (ARP-14 E) | Bisphenol-A based solid resins, esterifcation, anodic electrodeposition
Epoxy value (Eq/kg) : 1.08 – 1.18 | Viscosity @ 25oC (mPa s) : 430 – 550 | Softening point (oC) : 90 – 100
Posted in PO PM Industry
Lapox ARP-14 HF | Bisphenol-A based solid resins, modified resin, powder coating, better flow
Epoxy value (Eq/kg) : 1.23 – 1.33 | Viscosity @ 25oC (mPa s) : 480 – 580 | Softening point (oC) : 80 – 90
Posted in None
Lapox ARP-13 LV | Bisphenol-A based solid resins, hybrid powder coating
Epoxy value (Eq/kg) : 1.33 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 600 | Softening point (oC) : 95 – 101
Posted in None
Lapox ARL-160 | AH-359 | automotive, prepreg system, FRP structural component
Mixing ratio (Parts by weight) : 100 : 5 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox ARL-159 | AH-357 | AC-22 | automotive, prepreg system, hot melt prepreg system, very high Tg, very high glass transition temperature,
Mixing ratio (Parts by weight) : 100 : 15 : 2 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 155 – 165
Posted in PO PM Industry
Lapox L-68 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, FR-4 laminate
Mixing ratio (Parts by weight) : 100 : 32 : 1-3 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox L-67 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, G-10 laminate
Mixing ratio (Parts by weight) : 100 : 23 : 0.5-3.0 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox ARP-13 HT | Bisphenol-A based solid resins, powder coating
Epoxy value (Eq/kg) : 1.25 – 1.35 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 | Glass transition temperature (Tg) (oC) : 55
Posted in None
Lapox L-12 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, shelf life upto 6 month, G-11 laminate
Mixing ratio (Parts by weight) : 100 : 35 : 1-3 | Pot life @ 25oC (weeks) : 6 – 8 weeks | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Industry
Lapox ARP-12 | Bisphenol-A based solid resins, medium molecular weight, powder coating
Epoxy value (Eq/kg) : 1.42 – 1.53 | Viscosity @ 25oC (mPa s) : 375 – 475 | Softening point (oC) : 80 – 90
Posted in PO PM Industry
Lapox AC-14 (K-65) | accelerator and catalysts, liquid tertiary amine, accelerate anhydrides, accelerate polyamides, accelerate amines
Appearance : Clear yellow liquid | Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 580 – 635
Posted in PO PM Industry
Lapox L-12 | K-5 | automotive, prepregs and laminating systems, compressed laminate, prepreg, shorter shelf life, G-10 laminate, G-11 laminate
Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (hours) : > 4 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Industry
Lapox K-302 | modified polyamine, curing agent, self-leveling flooring, solvent-free coating, clear casting
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 300 – 600 | Amine value (mg KOH/g) : 260 – 310 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-440 | Cycloaliphatic amine, curing agent, accelerated curing agent, solvent-free coating, flooring
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 150 – 300 | Amine value (mg KOH/g) : 335 – 375 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-428 | Cycloaliphatic amine, curing agent, low viscosity, fast reactivity, self-leveling, high gloss, colour stability
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 50 – 150 | Amine value (mg KOH/g) : 340 – 390 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox L-12 | K-918 | K-13 | automotive, filament winding and pultrusion system, hot cure
Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 600 – 900 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 130 –…
Posted in PO PM Industry
Lapox AH-424 | Cycloaliphatic amine, curing agent, self-leveling flooring, high filler loading
Colour (Gardner) : Max 2 | Amine value (mg KOH/g) : 330 – 360 | Pot life @ 25oC (minutes) : 20 – 50 | Mixing ratio (Parts by weight) : 45
Posted in PO PM Industry
Lapox L-12 | AH-422 | automotive, filament winding and pultrusion system, long pot life, high glass transition temperature, high Tg, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 1,500 – 2,500 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox AH-416 | Cycloaliphatic amine, curing agent, moderate viscosity, transparent, high gloss, self-leveling flooring
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 400 – 600 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 30 – 45 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-727 | curing agent, Polyamide, curing under wet/damp, excellent adhesion, adhesion with metal, adhesion with concrete, primer, coatings
Colour (Gardner) : Max 12 | Viscosity @ 25oC (mPa s) : 1,000 – 2,000 | Amine value (mg KOH/g) : 280 – 300 | Pot life @ 25oC (minutes) : 46 – 65 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox AH-716 (K-29) | curing agent, Polyamide, low viscosity, solids coating, primer, floor coating
Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa s) : 2,500 – 5,500 | Amine value (mg KOH/g) : 202 – 225 | Pot life @ 25oC (minutes) : 80 – 100 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox ARL-135 LV | AH-337 | automotive, filament winding and pultrusion system, low viscosity, variable pot life, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-714 | curing agent, Polyamide, low viscosity, grout, crack injection, primer, protective coating, tile gap filling, adhesive, mortar
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 425 – 450 | Pot life @ 25oC (minutes) : 120 – 130 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox ARL-135 LV | AH-336 | automotive, filament winding and pultrusion system, variable pot life, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-713 (K-46) | curing agent, Polyamide, moderate viscosity, solids coating, primer, grout, mortar, adhesive, marine coating, industrial paints
Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 12,000 – 18,000 | Amine value (mg KOH/g) : 350 – 400 | Pot life @ 25oC (minutes) : 60 – 80 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox ARL-135 LV | AH-335 | automotive, filament winding and pultrusion system, variable pot life, ambient cure
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox AH-712 | curing agent, Polyamide, high viscosity, protective coating, adhesive, flooring, marine coating, industrial paint
Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa s) : 45,000 – 60,000 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 110 – 130 | Mixing ratio (Parts by weight)…
Posted in PO PM Industry
Lapox ART-22 | AH-326
Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95
Posted in PO PM Industry
Lapox ARL-140 | AH-419
Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220
Posted in PO PM Industry
Lapox ARL-138 | AH-417 | aerospace, tooling, laminating system, low viscosity system, high Tg, high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 100 – 110
Posted in PO PM Industry
Lapox AH-711 | curing agent, Polyamide, high viscosity, adhesive, sealant
Colour (Gardner) : Max 9 | Viscosity @ 40oC (mPa s) : 50,000 – 75,000 | Amine value (mg KOH/g) : 210 – 230 | Mixing ratio (Parts by weight) : 100 – 125
Posted in PO PM Industry
Lapox K-49 | Aromatic amine, low viscosity, moderate reactivity, solvent-free coating, chemical resistant coating, floorings, linings
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 700 – 900 | Amine value (Eq/kg) : 4.70 – 5.00 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox ARL-138 | AH-339 | aerospace, laminating system, high Tg, high glass transition temperature, dimensional stability at high temperature
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Industry
Lapox K-42 | Aromatic amine, curing agent, low viscosity, high reactive
Appearance : Dark brown liquid | Colour (Gardner) : Max 16 | Viscosity @ 25oC (mPa s) : 15,000 – 21,000 | Amine value (Eq/kg) : 4.40 – 4.80 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox K-41 | Aromatic amine, curing agent, low viscosity, chemical resistant, industrial flooring, coatings, tank linings
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 3,800 – 5,800 | Amine value (Eq/kg) : 4.70 – 5.10 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Industry
Lapox XR-128 | Solvent cut resins, high molecular weight, primer, enamel, flexibility
Epoxy value (Eq/kg) : Max 0.08 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Non-volatile content (%) : 49 – 51 (160oC/2h)
Posted in PO PM Industry
Lapox P-101 HV | Solvent cut resins, type 1 solution, paint and coatings
Epoxy value (Eq/kg) : 1.80 – 2.20 | Viscosity @ 25oC (mPa s) : 14,000 – 20,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)
Posted in PO PM Industry
Lapox P-101 | Solvent cut resins, type 1 solution, paint and coatings
Epoxy value (Eq/kg) : 1.90 – 2.20 | Viscosity @ 25oC (mPa s) : 9,000 – 13,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)
Posted in PO PM Industry
Lapox B-7 X 80 | Solvent cut resins, solids coating, excellent adhesion, gloss, flexibility
Epoxy value (Eq/kg) : 3.10 – 3.40 | Viscosity @ 25oC (mPa s) : 600 – 850 | Non-volatile content (%) : 79 – 81 (150oC/1h)
Posted in PO PM Industry
Lapox ARPN-54 | modified epoxy phenol novolac resins, composite applications, electrical applications, coating applications, industrial coating
Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.50 – 6.00 | Viscosity @ 25oC (mPa s) : 25,000 – 35,000
Posted in PO PM Industry
Lapox ARPN-36 X 80 | Epoxy phenol novolac resins, epoxy phenol novolac solution, chemical resistant coating, electrical applications, composite applications, industrial coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 800 – 1,500 | Non-volatile content (%) :79 – 81 (150oC/1h)
Posted in PO PM Industry
Lapox ARPN-36 M 80 | Epoxy phenol novolac resins, epoxy phenol novolac solution, chemical resistant coating, electrical applications, composite applications, industrial coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.40 – 4.60 | Viscosity @ 25oC (mPa s) : 150 – 350 | Non-volatile content (%): 79 – 81 (105oC/2h)
Posted in PO PM Industry
Lapox ARL-135 | AH-337 | aerospace, RTM, hand lay-up, infusion, low viscosity system, high Tg, high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 | AH-336
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 | AH-335
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-135 | AH-334 GL
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-135 | AH-333
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-135 | AH-332
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 700 – 1200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox L-12 | AH-411
Mixing ratio (Parts by weight) : 100 : 22 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 140 – 155
Posted in PO PM Industry
Lapox ARL-158 | AH-419
Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 170 – 200
Posted in PO PM Industry
Lapox ARL-135 LV | AH-422
Mixing ratio (Parts by weight) : 100 : 35 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox ARL-125 | AH-368
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 350 – 450 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-367 GL
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-365 GL
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-336
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-335
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARL-125 | AH-334
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-125 | AH-333
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90
Posted in PO PM Industry
Lapox ARL-160 | AH-357 | AC-22 | aerospace, hot melt prepreg system, structural component, sporting goods, engineering application
Mixing ratio (Parts by weight) : 100 : 15 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Industry
Lapox ARL-159 | AH-619 | structural component, high temperature performance, defence, engineering application
Mixing ratio (Parts by weight) : 100 : 40 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 180 – 200
Posted in PO PM Industry
Lapox K-112 | accelerator and catalysts, Modified viscous tertiary amine, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating
Appearance : Clear brown liquid | Viscosity @ 25oC (mPa s) : 1,000 – 1,800
Posted in PO PM Industry
Lapox K-86 | accelerator and catalysts, Solid polyamine complex, accelerate aromatic amines
Appearance : White crystalline powder | Melting point (oC) : Min 75
Posted in PO PM Industry
Lapox AC-20 | accelerator and catalysts, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating
Appearance : Brown liquid or solid | Viscosity @ 25oC (mPa s) : Max 100 | Melting point (oC) : 36 – 42
Posted in PO PM Industry
Lapox AC-19 | accelerator and catalysts, Liquid low reactive triamine, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating
Appearance : Clear liquid | Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 30
Posted in PO PM Industry
Lapox AC-13 | accelerator and catalysts, Liquid triamine, accelerate anhydride, accelerate polyamides, accelerate amines, composite, electrical, coating
Appearance : Clear liquid | Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : Max 10
Posted in PO PM Industry
Lapox AC-11
Appearance : White crystal | Melting point (oC) : Min 127 – 134
Posted in PO PM Industry
Lapox ARPN-36 (L-238) | Epoxy phenol novolac resins, semi-solid, comosites, electrical, chemical resistant coating, floorings, industrial coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.70 | Viscosity @ 52oC (mPa s) : 20,000 – 50,000
Posted in PO PM Industry
Lapox ARD-59
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 6.20 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 0.20
Posted in PO PM Industry
Lapox K-450
Chemistry : 3,3′-Diethyl-4,4′-diaminodiphenyl methane| Appearance : Dark brown liquid | Viscosity @ 40oC (mPa s) : 250 – 400
Posted in PO PM Industry
Lapox K-5 | aerospace, curing agent, aromatic amine, elevated temperature curing, high glass transition temperature
Chemistry : 4,4′-Diaminodiphenyl methane | Appearance : White to tan pastilles | Melting point (oC) : 88 – 92
Posted in PO PM Industry
Lapox ARFM-13 (XR-60) | Bisphenol-A/F blends, low viscosity, coating, composites, floor coating, construction
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.50 – 5.75 | Viscosity @ 25oC (mPa s) : 4,500 – 6,500
Posted in PO PM Industry
Lapox ARFM-12 (XR-123) | Bisphenol-A/F blends, Medium viscosity, coating, composites, floor coating, construction
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.55 – 5.80 | Viscosity @ 25oC (mPa s) : 6,500 – 8,500
Posted in PO PM Industry
Lapox B-47 | Bisphenol-A based modified liquid epoxy resin, high gloss, heavy duty flooring, solids coating, grout, crack-filling
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 5.50 | Viscosity @ 25oC (mPa s) : 450 – 650
Posted in PO PM Industry
Lapox ARB-33 | Bisphenol-A based modified liquid epoxy resin, primer, mortar, grout, maintenance
Colour (Gardner) : Max 1 | Colour (AHPA) : Max 75 | Epoxy value (Eq/kg) : 5.12 – 5.55 | Viscosity @ 25oC (mPa s) : 500 – 700
Posted in PO PM Industry
Lapox ARB-32 | Bisphenol-A based modified liquid epoxy resin
Colour (Gardner) : Max 1 | Colour (APHA) : Max 150 | Epoxy value (Eq/kg) : 4.65 – 5.12 | Viscosity @ 25oC (mPa s) : 500 – 700
Posted in PO PM Industry
Lapox ARB-30 | Bisphenol-A based modified liquid epoxy resin, primer, mortar, floor coating
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 4,500 – 5,500
Posted in PO PM Industry
Lapox ARD-60
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 7.00 – 7.80 | Viscosity @ 25oC (mPa s) : 10 – 22 | HyCl (%) : Max 0.15
Posted in PO PM Industry
Lapox ARB-28 | Bisphenol-A based modified liquid epoxy resin, primer, mortar, floor coating
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.00 – 5.50 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000
Posted in PO PM Industry
Lapox ARB-26 | Bisphenol-A based modified liquid epoxy resin, floor coating, high gloss, defect free surface
Colour (Gardner) : Milky white liquid | Epoxy value (Eq/kg) : 4.80 – 5.10 | Viscosity @ 25oC (mPa s) : 550 – 750
Posted in PO PM Industry
Lapox ARB-22 (XR-118) | Bisphenol-A based modified liquid epoxy resin, primer, mortar, floor coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.90 – 5.20 | Viscosity @ 25oC (mPa s) : 800 – 1,200
Posted in PO PM Industry
Lapox B-11 | standard viscosity, Bisphenol-A based unmodified liquid epoxy resin, LER, BLR
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000
Posted in PO PM Industry
Lapox B-9 | low viscosity, Bisphenol-A based unmodified liquid epoxy resin
Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 8,000 – 11,000
Posted in PO PM Industry
Lapox ARL-141 | high viscosity, Bisphenol-A based unmodified liquid epoxy resin, high reactivity
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.30 – 4.70 | Viscosity @ 25oC (mPa s) : 20,000 – 28,000
Posted in PO PM Industry
Lapox AR-101 | standard viscosity, Bisphenol-A based unmodified liquid epoxy resin
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.25 – 5.45 | Viscosity @ 25oC (mPa s) : 11,000 – 15,000
Posted in PO PM Industry
Lapox P-6 (ARP-19) | type 9, can coating, coil coating
Epoxy value (Eq/kg) : 0.34 – 0.42 | Viscosity @ 25oC (mPa s) : 5,000 – 10,000 | Softening point (oC) : 125 – 140
Posted in PO PM Industry
Lapox ASH-11 MIC | curing agent, sulfone, 3,3′-Diaminodiphenyl sulfone Micronised, uniform dispersion in solvent-free resin, micronised ASH-11, powder
Chemistry : 3,3′-Diaminodiphenyl sulfone Micronised | Appearance : Off-white to yellowish brown powder | Melting point (oC) : 167 – 175
Posted in None
Lapox P-4 (ARP-14) | type 4, enamels, can coating, tube coating
Epoxy value (Eq/kg) : 1.12 – 1.20 | Viscosity @ 25oC (mPa s) : 550 – 700 | Softening point (oC) : 90 – 102
Posted in PO PM Industry
Lapox ARA-32 | AH-732
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARA-32 | AH-733
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 50 – 70 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARA-32 | AH-734
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox ARA-32 | AH-735
Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : Thixotropic paste | Pot life @ 25oC (minutes) : 130 – 170 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Industry
Lapox A-83 | K-83 | standard adhesive, gap filling, construction adhesive
Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 35 – 45
Posted in PO PM Industry
Lapox ARA-30 | AH-735 | structural adhesive, high lap shear strength, general purpose
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 35 – 50
Posted in PO PM Industry
Lapox ARA-17 | AH-354 | toughness, quick, mechanical strength, general purpose
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10
Posted in PO PM Industry
Lapox A-16 | K-6 | marble, crack sealing, bonding, frame, construction adhesive
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 4,000 – 6,000 | Pot life @ 25oC (minutes) : 20 – 30
Posted in PO PM Industry
Lapox C-51 | K-6 | electrical adhesive
Type of system : Unfilled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 10 | Glass transition temperature (Tg) (oC) : 60 – 70
Posted in PO PM Industry
Lapox XR-110 | XH-68 | cable joints, construction adhesive
Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 25 – 35
Posted in PO PM Industry
Lapox ARA-12 | AH-718 | multi-purpose, zari, speaker, marble, ceramic, construction adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 32,000 – 37,000 | Pot life @ 25oC (minutes) : 90 – 105
Posted in PO PM Industry
Lapox A-555 | K-555 | toughness, quick, mechanical strength, construction adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10
Posted in PO PM Industry
Lapox A-53 | K-6 | marble, steel, metal, construction adhesive
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 30 – 60
Posted in PO PM Industry
Lapox A-35 | K-35 | solvent based, excellent mechanical properties, construction adhesive
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 500 | Pot life @ 25oC (minutes) : > 60
Posted in PO PM Industry
Lapox A-31 | AH-717 | bonding, high shear strength, construction adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 25,000 – 40,000 | Pot life @ 25oC (minutes) : 40 – 80
Posted in PO PM Industry
Lapox A-16 | K-5 | joints, hot cure, high temperature, construction adhesive
Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (minutes) : 170 – 190
Posted in PO PM Industry
Lapox A-16 | AH-800 | rapid cure, similar substrate, dissimilar substrate, construction adhesive
Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 3 – 7
Posted in PO PM Industry
Lapox A-16 | AH-717 | marble, ceramic, metal, concrete, shock resistant, vibration resistant, construction adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 15,000 – 20,000 | Pot life @ 25oC (minutes) : 150 – 200
Posted in PO PM Industry
Lapox ARL-143 | AH-335 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; varying pot life; fire retardannt application
Mixing ratio (Parts by weight) : 100 : 15 | Pot life @ 25oC (minutes) : 85 – 95 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Product
Lapox ARL-143 | AH-319 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; varying pot life; fire retardannt application
Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105
Posted in PO PM Product
Lapox ARL-135LV | AH-422 | industrial; RTM; hand lay-up and infusion systems; long pot life; high Tg; high glass trransition temperature
Mixing ratio (Parts by weight) : 100 : 35 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Product
Lapox ARL-135 LV | AH-334 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox ARL-135 LV | AH-333 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox ARL-135 LV | AH-332 | industrial; RTM; hand lay-up and infusion systems; low viscosity system; variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox ARL-135 | AH-337 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox AC-20 | accelerator and catalysts; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating
Appearance : Brown liquid or solid | Viscosity @ 25oC (mPa.s) : Max 100 | Melting point (oC): 36 – 42
Posted in PO PM Product
Lapox AC-19 | accelerator and catalysts; Liquid low reactive triamine; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating
Appearance : Clear liquid | Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 10 – 30
Posted in PO PM Product
Lapox ARL-125 | AH-367GL | industrial; RTM; hand lay-up and infusion systems; low viscosity system; vacuum technique; pressure bag technique
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 300 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox A-16 | AH-717 | marble; ceramic; metal; concrete; shock resistance; vibration resistant; construction adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 15,000 – 20,000 | Pot life @ 25oC (minutes) : 150 – 200
Posted in PO PM Product
Lapox ARL-125 | AH-365GL | industrial; RTM; hand lay-up and infusion systems; low viscosity system; vacuum technique; pressure bag technique; GL approved system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 200 – 300 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 75 – 85
Posted in PO PM Product
Lapox AC-14 (K-65) | accelerator and catalysts; Liquid tertiary amine; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating
Appearance : Clear yellow liquid | Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa.s) : 150 – 300 | Amine value (mg KOH/g) : 580 – 635
Posted in PO PM Product
Lapox AC-13 (K-13) | accelerator and catalysts; Liquid triamine; accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating
Appearance : Clear liquid | Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : Max 10
Posted in PO PM Product
Lapox ARL-160 | AH-359 | industrial; prepreg; FRP; structural component
Mixing ratio (Parts by weight) : 100 : 5 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (oC) : 110 – 120
Posted in PO PM Product
Lapox ARL-160 | AH-357 | AC-22 | industrial; prepreg; hot melt system; structural component; infrastructure; general engineering application
Mixing ratio (Parts by weight) : 100 : 15 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (oC) : 110 – 120
Posted in PO PM Product
Lapox ASH-11 MIC | curing agent; 3,3’-Diaminodiphenyl sulfone Micronised; 3,3′-DDS
Chemistry : 3,3’-Diaminodiphenyl sulfone Micronised | Appearance : Micronised powder | Colour (Gardner) : Off-white to yellowish brown | Melting point (oC) : 167 – 175 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max…
Posted in PO PM Product
Lapox ASH-11 | curing agent; 3,3’-Diaminodiphenyl sulfone; 3,3′-DDS
Chemistry : 3,3’-Diaminodiphenyl sulfone | Appearance : Crystalline powder | Colour (Gardner) : White to brownish | Melting point (oC) : 167 – 175 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10
Posted in PO PM Product
Lapox ARL-159 | AH-619 | industrial; prepreg; structural component; high temperature performance
Mixing ratio (Parts by weight) : 100 : 40 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (oC) : 180 – 200
Posted in PO PM Product
Lapox A-16 | K-5 | joints; hot cure; high temperature; construction adhesive
Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (minutes) : 170 – 190
Posted in PO PM Product
Lapox ASH-10 FF | curing agent; 4,4’-Diaminodiphenyl sulfone Free Flow; 4,4′-DDS
Chemistry : 4,4’-Diaminodiphenyl sulfone Free Flow | Appearance : Crystalline powder | Colour (Gardner) : White to off-white | Melting point (oC) : 176 – 185 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max…
Posted in PO PM Product
Lapox ARL-159 | AH-357 | AC-22 | industrial; prepreg; hot melt system
Mixing ratio (Parts by weight) : 100 : 15 : 2 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 155 – 165
Posted in PO PM Product
Lapox ASH-10 MIC | curing agent; 4,4’-Diaminodiphenyl sulfone Micronised; 4,4′-DDS
Chemistry : 4,4’-Diaminodiphenyl sulfone Micronised | Appearance : Micronised powder | Colour (Gardner) : White to off-white | Melting point (oC) : 176 – 180 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10
Posted in PO PM Product
Lapox L-68 | K-66 | K-13 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; FR-4 laminate
Mixing ratio (Parts by weight) : 100 : 32 : 1-3 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Product
Lapox ASH-10 | curing agent; 4,4’-Diaminodiphenyl sulfone; 4,4′-DDS
Chemistry : 4,4’-Diaminodiphenyl sulfone | Appearance : Crystalline powder | Colour (Gardner) : White to off-white | Melting point (oC) : 176 – 185 | Purity by HPLC (%) : Min 99.0 | Ash content (%) : Max 0.10
Posted in PO PM Product
Lapox L-67 | K-66 | K-13 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; G-10 laminate
Mixing ratio (Parts by weight) : 100 : 23 : 0.5-3.0 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Product
Lapox AH-727 | Modified polyamide curing agent; curing agent for wet/damp condition; excellent adhesion with metal; excellent adhesion with concrete; flooring; primer
Colour (Gardner) : Max 12 | Viscosity @ 25oC (mPa.s) : 1,000 – 2,000 | Amine value (mg KOH/g) : 280 – 300 | Pot life @ 25oC (minutes) : 46 – 65 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox A-16 | K-6 | marble; crack sealing; bonding; frames; construction adhesive
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 4,000 – 6,000 | Pot life @ 25oC (minutes) : 20 – 30
Posted in PO PM Product
Lapox AH-725 | polyamide curing agent; bonding; fast reactivity
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa.s) : 7,000 – 11,000 | Amine value (mg KOH/g) : 400 – 450 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox L-12 | K-10 | K-86 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; shelf life upto 6 months; G-11 laminate
Mixing ratio (Parts by weight) : 100 : 35 : 1-3 | Pot life @ 25oC (weeks) : 6 – 8 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Product
Lapox AH-716 (K-29) | polyamide curing agent; low viscosity; solids coating; primer; floor coatings; protective coatings
Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa.s) : 2,500 – 5,500 | Amine value (mg KOH/g) : 202 – 225 | Pot life @ 25oC (minutes) : 80 – 100 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox L-12 | K-5 | industrial; prepregs and laminating systems; compressed laminate system; prepreg; shorter shelf life; G-10 laminate; G-11 laminate
Mixing ratio (Parts by weight) : 100 : 27 | Pot life @ 25oC (hours) : > 4 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Product
Lapox AH-714 | polyamide curing agent; low viscosity; grouts; crack injection; primer; tile gap filling; mortar
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa.s) : 500 – 1,000 | Amine value (mg KOH/g) : 425 – 450 | Pot life @ 25oC (minutes) : 120 – 130 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox ARPN-36 | K-86 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg
Mixing ratio (Parts by weight) : 100 : 3-6 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 180
Posted in PO PM Product
Lapox AH-713 (K-46) | polyamide curing agent; moderate viscosity; solids coating; primer; grouts; mortar; adhesives
Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa.s) : 12,000 – 18,000 | Amine value (mg KOH/g) : 350 – 400 | Pot life @ 25oC (minutes) : 60 – 80 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox ARPN-36 | K-10 | K-86 | industrial; prepregs and laminating systems; compressed laminate system; B-stage prepreg; very high Tg; very high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 32-40 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 170 – 185
Posted in PO PM Product
Lapox A-35 | K-35 | solvent based; excellent mechanical properties; construction adhesive
Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 500 | Pot life @ 25oC (minutes) : > 60
Posted in PO PM Product
Lapox AH-712 | polyamide curing agent; high viscosity; adhesives; floorings; marine coatings; industrial paints; protective coatings
Colour (Gardner) : Max 9 | Viscosity @ 25oC (mPa.s) : 45,000 – 60,000 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 110 – 130 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox L-247 | K-918 | K-13 | industrial; filament winding and pultrusion; hot cure system; general purpose system; fire retardant
Mix viscosity @ 25oC : 100 : 64 : 1-3 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120
Posted in PO PM Product
Lapox A-38 | K-99 | joints; moisture resistance; high adhesion; chemical resistant; construction adhesive
Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 20 – 25
Posted in PO PM Product
Lapox AH-711 | polyamide curing agent; high viscosity; adhesives; sealants
Colour (Gardner) : Max 9 | Viscosity @ 40oC (mPa.s) : 50,000 – 75,000 | Amine value (mg KOH/g) : 210 – 230 | Mixing ratio (Parts by weight) : 100 – 125
Posted in PO PM Product
Lapox L-12 | K-5200 | industrial; filament winding and pultrusion; hot cure system; low viscosity system; long pot life; high chemical resistance; high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (m Pas) : 4,000 – 6,000 | Pot life @ 25oC (days) : 2 – 3 | Glass transition temperature (Tg) (oC) : 180 – 190
Posted in PO PM Product
Lapox L-12 | K-918 | K-13 | industrial; filament winding and pultrusion; hot cure system; low viscosity; long pot life system; high chemical resistance; high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (m Pas) : 600 – 900 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 130 –…
Posted in PO PM Product
Lapox A-53 | K-6 | marble; steel; metal; construction adhesive
Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 30 – 60
Posted in PO PM Product
Lapox L-12 | K-24 | industrial; filament winding and pultrusion; hot cure system; low viscosity system, long pot life,high chemical resistance; high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 34 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 145 – 155
Posted in PO PM Product
Lapox L-12 | K-12 | K-13 | industrial; filament winding and pultrusion; hot cure system; standard system; fast reactivity
Mixing ratio (Parts by weight) : 100 : 100 : 1-3 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 95 –…
Posted in PO PM Product
Lapox L-12 | AH-667 | industrial; filament winding and pultrusion; hot cure system; high chemical resistance; high abrasion resistance
Mixing ratio (Parts by weight) : 100 : 27 | Mix viscosity @ 50oC : 3,000 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 150 – 160
Posted in PO PM Product
Lapox A-555 | K-555 | toughness; quick; mechanical strength; construction; adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10
Posted in PO PM Product
Lapox K-540 (AH-540) | low viscosity curing agent; phenalkamine curing agent; marine coating; industrial; maitenance coating
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Amine value (mg KOH/g) : 490 – 550 | Pot life @ 25oC (minutes) : 30 – 55 | Mixing ratio (Parts by weight)…
Posted in None
Lapox L-12 | AH-113 | K-13 | industrial; filament winding and pultrusion; hot cure system; flame retardancy
Mixing ratio (Parts by weight) : 100 : 95 : 0.5-2.0 | Mix viscosity @ 25oC (mPa s) : 1,900 – 2,100 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 165 –…
Posted in PO PM Product
Lapox ARA-12 | AH-718 | multi-purpose; zari; speaker; marble; ceramic; construction adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 32,000 – 37,000 | Pot life @ 25oC (minutes) : 90 – 105
Posted in PO PM Product
Lapox ARL-136 | AH-126 | industrial; filament winding and pultrusion; hot cure system; superior fiber wetting; excellent mechanical properties; good surface finish
Mixing ratio (Parts by weight) : 100 : 90 | Mix viscosity @ 25oC (mPa s) : 300 – 600 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 125
Posted in PO PM Product
Lapox AH-543 (XH-80) | low colour; low viscosity; phenalkamine curing agent; anti-corrosive coating; marine coating
Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa.s): 2,000 – 5,000 | Amine value (mg KOH/g) : 300 – 350 | Pot life @ 25oC (minutes) : 50 – 65 | Mixing ratio (Parts by weight) : 67…
Posted in PO PM Product
Lapox ARF-11 | K-918 | K-13 | industrial; filament winding and pultrusion; hot cure system; non-crystallisable; excellent chemical resistance
Mixing ratio (Parts by weight) : 100 : 90 : 1-3 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 –…
Posted in PO PM Product
Lapox K-302 | modified polyamine; curing agent; self-leveling flooring; solvent-free coating; clear casting; protective coatings
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 300 – 600 | Amine value (mg KOH/g) : 260 – 310 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox L-12 | AH-422 | industrial; filament winding and pultrusion; ambient cure system; long pot life; high Tg; high glass transition temperature
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 1,500 – 2,500 | Pot life @ 25oC (minutes) : 300 – 350 | Glass transition temperature (Tg) (oC) : 130 – 140
Posted in PO PM Product
Lapox L-12 | AH-411 | industrial; filament winding and pultrusion; ambient cure system; very high Tg; very high glass transition temperature; moderate viscosity
Mixing ratio (Parts by weight) : 100 : 22 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 140 – 155
Posted in PO PM Product
Lapox AH-440 | Cycloaliphatic amine; curing agent; accelerated curing agent; solvent-free coating; flooring; protective coatings
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 150 – 300 | Amine value (mg KOH/g) : 335 – 375 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox ARC-15 | AH-122 | Electrical and Electronics; Bushings; Conventional Vacuum Casting; Pre-filled; Hot cure Indoor
Type of system : Pre-filled | Nature : Hot cure / Indoor| Mixing ratio (Parts by weight) : 100 : 100 | Glass transition temperature (Tg) (oC) : 110 – 120 | Thermal class : H | Applications : Switchgears, Insulators, Bushings
Posted in PO PM Product
Lapox L-12 | AH-337 | industrial; filament winding and pultrusion; ambient cure system; high Tg; high glass transition temperature;variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) (oC) : 90 – 105
Posted in PO PM Product
Lapox AH-428 | Cycloaliphatic amine; curing agent;low viscosity;fast reactivity;self-leveling;high gloss;colour stability
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 50 – 150 | Amine value (mg KOH/g) : 340 – 390 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox L-12 | AH-336 | industrial; filament winding and pultrusion; ambient cure system; high Tg; high glass transition temperature; variable pot life
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) (oC) : 90 – 105
Posted in PO PM Product
Lapox ARC-16 | AH-118 | ADP-11
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 80 : 0 – 8 | Glass transition temperature (Tg) (oC) : 105 – 115 | Thermal class : F | Applications : Switchgears, Insulators, Bushings, Instrument…
Posted in PO PM Product
Lapox L-12 | AH-335 | industrial; filament winding and pultrusion; ambient cure system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) (oC) : 90 – 105
Posted in PO PM Product
Lapox AH-424 | Cycloaliphatic amine; curing agent; self-leveling flooring; high filler loading; protective coatings
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 20 – 50 | Amine value (mg KOH/g) : 330 – 360 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox L-12 | AH-315 | industrial; filament winding and pultrusion; ambient cure system
Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 800 | Pot life @ 25oC (hours) : 7 – 9 hr | Glass transition temperature (Tg) (oC) : 85 –…
Posted in PO PM Product
Lapox AH-422 | Cycloaliphatic amine; unmodified low viscosity; curing agent; high Tg; high glass transition temperature; long pot life
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 100 – 140 | Pot life @ 25oC (minutes) : 200 – 250 | Mixing ratio (Parts by weight) : 32
Posted in PO PM Product
Lapox ARCH-11 | AH-214 | K-13
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 90 : 0.5 – 2.0 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F | Applications : Switchgears, Insulators, Bushings,…
Posted in PO PM Product
Lapox ARCH-11 | AH-215
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight): 100 : 90 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F | Applications : Switchgears, Insulators, Bushings, Instrument Transformers
Posted in PO PM Product
Lapox AH-420 (K-964) | Cycloaliphatic amine; very low viscosity; moderate pot life; protective coating; flooring; chemical resistance
Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa.s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight) :…
Posted in PO PM Product
Lapox ARCH-12 | AH-214 | K-13
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 80 : 0.5 : 2.0 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class :…
Posted in PO PM Product
Lapox AH-416 | Cycloaliphatic amine; moderate viscosity; transparent curing agent
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 400 – 600 | Amine value (mg KOH/g) : 250 – 300 | Pot life @ 25oC (minutes) : 30 – 45 | Mixing ratio (minutes) : 60
Posted in PO PM Product
Lapox ARCH-12 | AH-215
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 80 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F | Applications :…
Posted in PO PM Product
Lapox AH-412 (K-552) | Cycloaliphatic amine; low viscosity curing agent; excellent mechanical properties
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 50 – 150 | Pot life @ 25oC (minutes) : 110 – 160 | Mixing ratio (Parts by weight) : 38
Posted in PO PM Product
Lapox AH-411 | unmodified cycloaliphatic amine curing agent; coatings; flooring applications; composite applications; protective coatings
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23
Posted in PO PM Product
Lapox ARCH-13 | AH-215
Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 70 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F | Applications :…
Posted in PO PM Product
Lapox ARL-12 | AH-714 | industrial; filament winding and pultrusion; ambient cure system; superior adhesion; toughness
Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 1,200 – 1,500 | Pot life @ 25oC (minutes) : 120 – 150 | Glass transition temperature (Tg) (oC) : 55 – 65
Posted in PO PM Product
Lapox (AH-618) K-5200 | Aromatic amine; Elevated temperature curing curing agent; high Tg,high glass transition temperature;long pot life
Appearance : Yellow to brown liquid | Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 100 – 300 | Amine value (mg KOH/g) : 628 – 634 | Mixing ratio (Parts by weight) : 24
Posted in PO PM Product
Lapox K-450 | Aromatic amine; liquid curing agent; very low reactivity; composite
Appearance : Dark brown liquid (solidifies upon storage) | Viscosity @ 40oC (mPa.s) : 250 – 400 | Amine value (mg KOH/g) : 430 – 450 | Mixing ratio (Parts by weight) : 34
Posted in PO PM Product
Lapox K-92 | Aromatic amine; ambient cure modified curing agent; chemical resistant coating; tank lining; flooring; protective coating
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa.s) : 5,000 – 7,500 | Amine value (Eq/kg) : 4.40 – 5.10 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Product
Lapox C-17 | K-12 | K-13 | K-14
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.5 – 1.5 : 0 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95…
Posted in PO PM Product
Lapox K-49 | Aromatic amine; low viscosity; moderate reactivity; solvent-free coating; chemical resistant coating; floorings; linings; curing agent; protective coating
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa.s) : 700 – 900 | Amine value (Eq/kg) : 4.70 – 5.00 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Product
Lapox K-112 | accelerator and catalysts; Modified viscous tertiary amine;accelerate anhydride; accelerate polyamides; accelerate amines; composite; electrical; coating
Appearance : Clear brown liquid | Viscosity @ 25oC (mPa.s) : 1,000 – 1,800
Posted in PO PM Product
Lapox C-50 | K-61
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 80 | Glass transition temperature (Tg) (oC) : 105 – 125 | Thermal class : H | Applications :…
Posted in PO PM Product
Lapox K-42 | Aromatic amine; curing agent; low viscosity; high reactive; protective coating
Appearance : Dark brown liquid | Colour (Gardner) : Max 16 | Viscosity @ 25oC (mPa.s) : 15,000 – 21,000 | Amine value (Eq/kg) : 4.40 – 4.80 | Mixing ratio (Parts by weight) : 60
Posted in PO PM Product
Lapox K-86 | accelerator and catalysts; Solid polyamine complex; accelerate aromatic amines
Appearance : White crystalline powder | Melting Point (oC) : Min 75
Posted in PO PM Product
Lapox C-50 | K-225
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 80 | Glass transition temperature (Tg) (oC) : 90 – 105 | Thermal class : H | Applications :…
Posted in PO PM Product
Lapox K-41 | Aromatic amine; curing agent; low viscosity; chemical resistant; industrial flooring; coatings; tank linings; protective coating
Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa.s): 3,800 – 5,800 | Amine value (Eq/kg) : 4.70 – 5.10| Mixing ratio (Parts by weight) : 60
Posted in PO PM Product
Lapox ARC-30 | AH-714
Type of system : Pre-filled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B | Applications :…
Posted in PO PM Product
Lapox C-2 | K-1
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F | Applications :…
Posted in PO PM Product
Lapox C-59 | K-1
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F | Applications :…
Posted in PO PM Product
Lapox K-5 | Aromatic amine; curing agent; Pure 4,4′-diamino diphenyl methane; curing at elevated temperature
Appearance : White to tan pastilles | Mixing ratio (Parts by weight) : 26
Posted in PO PM Product
Lapox ARL-111 | AH-358 | ARS-101
Type of system : Unfilled | Nature : Hot cure Indoor | Mixing ratio (Parts by weight) : 100 : 15 | Glass transition temperature (Tg) (oC) : 80 – 90 | Thermal class : F | Applications : Paper…
Posted in PO PM Product
Lapox AH-667 | Aromatic amine; curing agent; DDM based semi solid; composite
Appearance : Brown liquid | Colour (Gardner) : Max 12 | Viscosity @ 80oC (mPa.s) : 80 – 120 | Mixing ratio (Parts by weight) : 28
Posted in PO PM Product
Lapox C-1 | K-1
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F | Applications :…
Posted in PO PM Product
Lapox AH-664 | Aromatic amine; curing agent; viscous liquid; low reactivity; composite
Appearance : Dark brown liquid | Colour (Gardner): Max 12 | Viscosity @ 25oC (mPa.s) : 3,500 – 6,500 | Amine value (mg KOH/g) : 430 – 470 | Mixing ratios (Parts by weight) : 34
Posted in PO PM Product
Lapox AH-657 | Aromatic amine;curing agent;modified low viscosity;high Tg;high glass transition temperature;filament winding;pultrusion;composite
Appearance : Dark brown liquid | Colour (Gardner): Max 18 | Viscosity @ 25oC (mPa.s) : 9,000 – 14,000 | Amine value (mg KOH/g) : 555 – 625 | Mixing ratio (Parts by weight) : 27
Posted in PO PM Product
Lapox ARC-18 | AH-123
Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 122 – 132 | Thermal class : F | Applications :…
Posted in PO PM Product
Lapox ARC-31 | AH-114 | AC-13
Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.0 – 0.2 | Glass transition temperature (Tg) (oC) : 90 – 100 | Thermal class :…
Posted in PO PM Product
Lapox ARC-35 | AH-676
Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 26 | Glass transition temperature (Tg) (oC) : 70 – 80 | Thermal class : F | Applications : Electronic assembly
Posted in PO PM Product
Lapox XH-61 (AH-321) | Modified polyamine adduct solution in xylene and butanol; clear coating
Colour: Max 2 | Viscosity @ 25oC (mPa.s) : 1,500 – 2,000 | Amine value (mg KOH/g) : 165 – 210 | Pot life @ 25oC (hours) : 4 – 6 | Mixing ratio (Parts by weight) : 30 (with resin P-101)
Posted in PO PM Product
Lapox K-306 | Butylated melamine formaldehyde curing agent; backing enamel; polyester film coating
Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa.s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)
Posted in PO PM Product
Lapox K-105 | Coal tar modified polyamine adduct; curing agent; high build coatings
Colour (Gardner) : Black | Viscosity @ 25oC (mPa.s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : Min 20 | Mixing ratio (Parts by weight) : 100 (with resin ARB-28)
Posted in PO PM Product
Lapox K-54 (AH-356) | Modified polyamine adduc; curing agent; high solids coating; mortar; adhesives
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 2,900 – 3,600 | Amine value (mg KOH/g) : 398 – 415 |Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight) : 35
Posted in PO PM Product
Lapox AH-319 (K-48) | Modified polyamine; curing agent; low vapour pressure; high reactivity; adhesive; casting; coating; composite
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 200 – 300 | Amine value (Eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) : 18
Posted in PO PM Product
Lapox K-7 | Unmodified aliphatic polyamine; curing agent; adhesive; casting; coating; composite
Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa.s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12
Posted in PO PM Product
Lapox K-6 | Unmodified aliphatic polyamine; curing agent; adhesive; casting; coating; composite
Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa.s) : – | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 10 – 12
Posted in PO PM Product
Lapox AH-371 to AH-373 | modified polyamine; curing agent; crack-filling; stone coating; mortar; adhesive
Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa.s) : 100 – 550 | Amine value (mg KOH/g) : 500 – 1,000 | Pot life @ 25oC (minutes) : 5 – 30 | Mixing ratio (Parts by weight) : 18-25
Posted in PO PM Product
Lapox AH-354 | aliphatic amine; curing agent; high viscosity; extremely fast reactvity; fast setting adhesive; putty
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa.s) : 60,000 – 1,00,000 | Amine value (mg KOH/g) : 340 – 375 | Pot life @ 25oC (minutes) : 5 – 10 | Mixing ratio (Parts by weight) : 100
Posted in PO PM Product
Lapox AH-351 | modified polyamine curing agent; chemical resistance; sulphuric acid resistance; protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 25
Posted in PO PM Product
Lapox AH-350 | Modified polyamine adduct; curing agent; high reactivity; sealants; adhesives
Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa.s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 3 – 4 | Mixing ratio (Parts by weight) : 40
Posted in PO PM Product
Lapox AH-348 | Unmodified aliphatic polyamine; curing agent; transparent casting; flexible casting; flexible coating
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 5-10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight) : 21
Posted in PO PM Product
Lapox AH-342 | Modified polyamine adduct; curing agent; high reactivity; sealants; adhesives
Colour (Gardner) : Yellow brown | Viscosity @ 25oC (mPa.s) : 19,000 – 31,000 | Amine value (mg KOH/g) : 500 – 640 | Pot life @ 25oC (minutes) : 15 – 25 | Mixing ratio (Parts by weight) : 80
Posted in PO PM Product
Lapox AH-341 | modified aliphatic polyamine; high solids coating; long potlife; curing agent
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight) : 40
Posted in PO PM Product
Lapox AH-315 | unmodified polyamine curing agent, adhesives, casting, coating, composite applications, protective coating
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 15 | Pot life @ 25oC (hours) : 7 – 9 | Mixing ratio (Parts by weight) : 32
Posted in PO PM Industry
Lapox AH-313 | unmodified aliphatic polyamine curing agent; adhesives; casting; coating; composite applications; protective coating
Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15
Posted in PO PM Product
Lapox ARD-57 (XR-104) | aromatic – difunctional; reactive diluent; aniline; high performance composites
Colour (Gardner) : Max 16 | Viscosity @ 25oC (mPa.s) : 100 – 200
Posted in PO PM Product
Lapox ARD-58 | aromatic – monofunctional; reactive diluent; cardanol; coating; adhesives; electrical applications
Colour (Gardner) : Max 10 | Viscosity @ 25oC (mPa.s) : 20 – 50 | HyCl (%) : Max 1.00
Posted in PO PM Product
Lapox ARD-15 (K-513) | aromatic – monofunctional; reactive diluent; cardanol; coating; adhesives; electrical applications
Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa.s) : 40 – 70 | HyCl (%) : Max 1.00
Posted in PO PM Product
Lapox ARD-12 (XR-59) | aromatic – monofunctional; reactive diluent; p-tertiary butyl phenol; high chemical resistance; flooring
Colour (Gardner) : Max 2| Viscosity @ 25oC (mPa.s) : 20 – 35 | HyCl (%) : Max 0.20
Posted in PO PM Product
Lapox ARD-11 (K-103) | aromatic – monofunctional; reactive diluent; phenol; flooring; electrical application
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 6-8 | HyCl (%) : Max 0.20
Posted in PO PM Product
Lapox ARD-10 (K-100) | aromatic – monofunctional; reactive diluent; o-Cresol; high gloss; high mechanical strength; flooring; electrical application
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 6 – 8 | HyCl (%) : Max 0.20
Posted in PO PM Product
Lapox ARD-65 | aliphatic – trifunctional; reactive diluent; castor oil ; concrete; flooring; thermal shock resistance
Colour (Gardner) : Max 6 | Viscosity @ 25oC (mPa.s) : 250 – 500
Posted in PO PM Product
Lapox ARD-55 (XR-85) | aliphatic – trifunctional; reactive diluent; trimethylol propane; composite; coatings
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 100 – 200
Posted in PO PM Product
Lapox ARD-60 | aliphatic – difunctional; reactive diluent; 1,4-butane diol; composite application
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 15 – 22 | HyCl (%) : Max 0.15
Posted in PO PM Product
Lapox ARD-59 | aliphatic – difunctional; reactive diluent; dipropylene glycol; composite application
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 20 – 50 | HyCl (%) : Max 0.20
Posted in PO PM Product
Lapox ARD-56 (XR-87) | aliphatic – difunctional; reactive diluent; neopentyl glycol; coating applications; construction; composites
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 12 – 18 | HyCl (%) : Max 0.15
Posted in PO PM Product
Lapox ARD-54 (XR-19) | aliphatic – difunctional; reactive diluent; polypropylene glycol
Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa.s) : 40 – 90 | HyCl (%) : Max 0.15
Posted in PO PM Product
Lapox ARD-52 (XR-86) | aliphatic – difunctional; reactive diluent; 1,6-hexane diol; coating applications
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 15 – 30 | HyCl (%) : Max 0.15
Posted in PO PM Product
Lapox ARD-51 (K-77) | aliphatic – difunctional; reactive diluent; 1,4-butane diol
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 10 – 22 | HyCl (%) : Max 0.15
Posted in PO PM Product
Lapox ARD-14 (XR-83) | aliphatic – monofunctional; reactive diluent; extreme low viscosity; construction; flooring
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : Max 2 | HyCl (%) : Max 0.10
Posted in PO PM Product
Lapox ARD-13 (XR-80) | aliphatic – monofunctional; reactive diluent; excellent wetting; excellent flexibility; flooring; coating
Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 4 – 12 | HyCl (%) : Max 0.10
Posted in PO PM Product
Lapox ARTF-50 | multifunctional resin; dicyclopentadiene; aerospace; composite; electrical applications; excellent moisture resistance; high thermal stability; low dielectric constant
Colour (Gardner) : Max 16 | Viscosity @ 85oC (mPa.s) : 1,000 – 1,500 | HyCl (%) : Max 0.05
Posted in PO PM Product
Lapox ARTF-34 | trifunctional resin; triphenol methane; aerospace; high performance composites; electrical applications; electronic applications
Colour (Gardner) : Max 13 | Viscosity @ 150oC (mPa.s) : 30 – 55 | HyCl (%) : Max 0.05
Posted in PO PM Product
Lapox ARF-15 | pure viscous Bisphenol-F resin
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 156 – 167 | Viscosity @ 25oC (mPa.s) : 1,200 – 1,600 | CAS # : 9003-36-53 | 42423-25-6
Posted in PO PM Product
Lapox ARC-28 | Bisphenol-A based resin; electrical machine; impregnation; aerospace
Colour (APHA) : Max 50 | Viscosity @ 25oC (mPa.s) : 4,000 – 5,500 | HyCl (%) : Max 0.03
Posted in PO PM Product
Lapox ARBZ-11 | aerospace; benzoxazine resin; excellent moisture resistance; low shrinkage; moderate flammability
Colour (Gardner) : Yellow solid | Softening point (oC) : 60 – 80 | Viscosity @ 125oC (mPa.s) : 50 – 500 | Gel time (sec) : 250 – 550 sec @ 220oC
Posted in PO PM Product
Lapox ARBZ-10 A 75 | aerospace; benzoxazine resin; 75% solution in acetone
Colour (Gardner) : Yellowish liquid | Solid content (%) : 74 – 76 | Viscosity @ 25oC (mPa.s) : 100 – 400 | Gel time (%) : 380 – 420 sec @ 220oC
Posted in PO PM Product
Lapox ARBZ-10 | aerospace; benzoxazine resin; excellent moisture resistance; low shrinkage; moderate flammability
Colour (Gardner) : Yellow solid | Softening point (oC) : 60 – 80 | Viscosity @ 100oC (mPa.s) : 1,000 – 7,000 | Gel time (sec) : 200 – 450 sec @ 220oC
Posted in PO PM Product
Lapox ARBMI-11 | aerospace; Bismaleimide resin; excellent thermal stability
Colour (Gardner) : Yellow powder | Melting point (oC) : 155 – 158 | HyCl (%) : Acid value: <1
Posted in PO PM Product
Lapox ARTF-38 | aerospace; multifunctional resin; distilled unmodified resin; m-amino phenol based; high performance
Epoxy equivalent weight (g/eq) : 94 -102 | Viscosity @ 25oC (mPa.s) : 1,500 – 4,800 | HyCl (%) : Max 0.20 | CAS # : 71604-74-5
Posted in PO PM Product
Lapox ARTF-37 | aerospace; multifunctional resin; unmodified resin; m-amino phenol based; high performance
Epoxy equivalent weight (g/eq) : 102 – 110 | Viscosity @ 25oC (mPa.s) : 7,000 – 13,000 | HyCl (%) : Max 0.30 | CAS # : 71604-74-5
Posted in PO PM Product
Lapox ARTF-36 | aerospace; multifunctional resin; distilled unmodified resin; p-amino phenol based; high performance
Epoxy equivalent weight (g/eq) : 95 – 106 | Viscosity @ 25oC (mPa.s) : 550 – 850 | HyCl (%) : Max 0.20 | CAS # : 5026-74-4
Posted in PO PM Product
Lapox ARTF-35 | aerospace; multifunctional resin; unmodified resin; p-amino phenol based; high performance
Epoxy equivalent weight (g/eq) : 105 – 115 | Viscosity @ 25oC (mPa.s) : 2,000 – 5,000 | HyCl (%) : Max 0.30 | CAS # : 5026-74-4
Posted in PO PM Product
Lapox ARTF-33 (XR-93) | aerospace; multifunctional resin; specialty resin; ethyl substituted MDA base; high performance
Colour (Gardner) : Max 7 | Epoxy equivalent weight (g/eq) : 118 – 133 | Viscosity @ 25oC (mPa.s) : 7,000 – 12,000 | HyCl (%) : Max 0.10 | CAS # : 130728-76-6
Posted in PO PM Product
Lapox ARTF-23 (XR-23) | aerospace; multifunctional resin; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 3,000 – 6,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARTF-18 | aerospace; multifunctional resin; general purpose; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 7,000 – 19,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARTF-17 | aerospace; multifunctional resin; high viscosity; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 17,000 – 19,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARTF-16 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 13,000 – 15,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARTF-15 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 11,000 – 13,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARTF-14 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 10,000 – 12,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARTF-13 | aerospace; multifunctional resin; medium viscosity; specialty resin; MDA based; high performance
Colour (Gardner) : Max 12 | Epoxy equivalent weight (g/eq) : 117 – 134 | Viscosity @ 50oC (mPa.s) : 7,000 – 11,000 | HyCl (%) : Max 0.10 | CAS # : 28768-32-3
Posted in PO PM Product
Lapox ARPN-54 | modified epoxy phenol novolac resins; composite applications; electrical applications; coating applications; protective coating
Colour (Gardner) : Max 2 | Epoxy equivalent weight (g/eq) : 167 – 182 | Viscosity @ 25oC (mPa.s) : 25,000 – 35,000
Posted in PO PM Product
Lapox ARPN-36 X 80 | Epoxy phenol novolac resins; epoxy phenol novolac solution; chemical resistant coating; electrical applications; composite applications; protective coating
Colour (Gardner) : Max 2 | Epoxy equivalent weight (g/eq) : 215 – 231 | Viscosity @ 25oC (mPa.s) : 800 – 1,500 | Non-volatile content (%) : 79 – 81 (150oC/1h)
Posted in PO PM Product
Lapox ARPN-36 M 80 | Epoxy phenol novolac resins; epoxy phenol novolac solution; chemical resistant coating; electrical applications; composite applications; protective coating
Colour (Gardner) : Max 2 | Epoxy equivalent weight (g/eq) : 215 – 231 | Viscosity @ 25oC (mPa.s) : 150 – 350 | Non-volatile content (%) : 79 – 81 (105oC/2h)
Posted in PO PM Product
Lapox ARPN-36 (L-238) | Epoxy phenol novolac resins; semi-solid; composites; electrical, chemical resistant coating; floorings; protective coating
Colour (APHA) : Max 250 | Epoxy equivalent weight (g/eq) : 175 – 182 | Viscosity @ 52oC (mPa.s) : 20,000 – 50,000
Posted in PO PM Product
Lapox ARPN-25 | Epoxy phenol novolac resins; aerospace; low viscosity; average functionality; functionality of 2.5
Colour (APHA) : Max 250 | Epoxy equivalent weight (g/eq) : 172 – 179 | Viscosity @ 52oC (mPa.s) : 1,100 – 1,700
Posted in PO PM Product
Lapox A-31 AH-717 | standard adhesive; composite adhesive
Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 25,000 – 40,000 | Pot life @ 25oC (minutes) : 130 – 150
Posted in PO PM Product
Lapox ARCH-13 | Cycloaliphatic resins; higher toughness; outdoor coating; electrical casting; flooring; protective coating; UV resistance
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 220 – 240 | Viscosity @ 25oC (mPa.s) : 2000 – 4000 | CAS # : 30583-72-3
Posted in PO PM Product
Lapox ARCH-12 | Cycloaliphatic resins; modified resin; low viscosity; thermal shock resistance; electrical casting; protective coating; UV resistance
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 180 – 200 | Viscosity @ 25oC (mPa.s) : 350 – 750
Posted in PO PM Product
Lapox ARCH-11 (XR-34) | Cycloaliphatic resins; electrical casting; potting; UV resistance; outdoor coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 159 – 182 | Viscosity @ 25oC (mPa.s) : 500 – 1,100 | CAS # : 1395383-69-32 | 5493-45-8
Posted in PO PM Product
Lapox XR-128 | Solvent cut resins; polyester film coating; high molecular weight epoxy solution; primer; enamel; coating high flexibility
Epoxy equivalent weight (g/eq) : 12,500 | Viscosity @ 25oC (mPa.s) : 2,000 – 5,000 | Non-volatile content (%) : 49 – 51 (160oC/2h)
Posted in PO PM Product
Lapox C-51 | K-6
Type of system : Unfilled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 10 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B | Applications :…
Posted in PO PM Product
Lapox P-101 HV | Solvent cut resins; type 1; resin solution in xylene; paint and coatings; protective coating
Epoxy equivalent weight (g/eq) : 606 – 741 | Viscosity @ 25oC (mPa.s) : 14,000 – 20,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)
Posted in PO PM Product
Lapox P-101 | Solvent cut resins; type 1; resin solution in xylene; paint and coatings; protective coating
Epoxy equivalent weight (g/eq) : 606 – 702 | Viscosity @ 25oC (mPa.s) : 9,000 – 13,000 | Non-volatile content (%) : 74 – 76 (150oC/2h)
Posted in PO PM Product
Lapox L-68 | Brominated resins; brominated resin solution; solution in methyl ethyl ketone; FR-4 laminates; fire retardant
Epoxy equivalent weight (g/eq) : 450 – 500 | Viscosity @ 25oC (mPa.s) : 2,200 – 3,000 | Bromine content (%) : 19 – 23
Posted in PO PM Product
Lapox B-7 X 80 | Solvent cut resins; solids coating; excellent adhesion; high gloss; flexibility
Epoxy equivalent weight (g/eq) : 294 – 323 | Viscosity @ 25oC (mPa.s) : 600 – 850 | Non-volatile content (%) : 79 – 81 (150oC/1h)
Posted in PO PM Product
Lapox ARL-154 | Solvent cut resins; polyester film coating
Viscosity @ 25oC (mPa s) : 50 – 350 | Non-volatile content (%) : 50 – 55 (120oC/2h)
Posted in PO PM Product
Lapox ARL-148 | Solvent cut resins;polyester film coating
Viscosity @ 25oC (mPa s) : 50 – 350 | Non-volatile content (%) : 48 – 52 (120oC/2h)
Posted in PO PM Product
Lapox ARFM-14 (XR-106) | Bisphenol-A/F blends;solids coating;construction;floor coating
Colour (Gardner) : Max 2 | Epoxy equivalent weight (g/eq) : 185 – 196 | Viscosity @ 25oC (mPa.s) : 860 – 960
Posted in PO PM Product
Lapox ARFM-13 (XR-60) | Bisphenol-A/F blends ;low viscosity;coating;composites;floor coating;construction
Colour (Gardner) : Max 2 | Epoxy equivalent weight (g/eq) : 174 – 182 | Viscosity @ 25oC (mPa.s) : 4,500 – 6,500
Posted in PO PM Product
Lapox ARFM-12 (XR-123) | Bisphenol-A/F blends; Medium viscosity; coating; composites; floor coating; construction
Colour (Gardner) : Max 2 | Epoxy equivalent weight (g/eq) : 172 – 180 | Viscosity @ 25oC (mPa.s) : 6,500 – 8,500
Posted in PO PM Product
Lapox ARF-14 | Bisphenol-F based resin; high viscosity; constructon; composites; electrical; casting; protective coating
Colour (APHA) : Max 200 | Epoxy equivalent weight (g/eq) : 159 – 172 | Viscosity @ 25oC (mPa.s) : 5,000 – 7,000 | CAS # : 9003-36-53 | 42423-25-6
Posted in PO PM Product
Lapox ARF-13 | Bisphenol-F based resin; medium viscosity; constructon; composites; electrical; casting; protective coating
Colour (APHA) : Max 200 | Epoxy equivalent weight (g/eq) : 164 – 172 | Viscosity @ 25oC (mPa.s) : 3,300 – 4,100 | CAS # : 9003-36-53 | 42423-25-6
Posted in PO PM Product
Lapox ARF-12 | Bisphenol-F based resin; low viscosity; constructon; composites; electrical; casting; protective coating
Colour (APHA) : Max 200 | Epoxy equivalent weight (g/eq) : 164 – 172 | Viscosity @ 25oC (mPa.s) : 2,000 – 3,300 | CAS # : 9003-36-53 | 42423-25-6
Posted in PO PM Product
Lapox ARF-11 (XR-40) | standard Bisphenol-F based resin; construction; composites; electrical; casting; protective coating
Colour (APHA) : Max 200 | Epoxy equivalent weight (g/eq) : 159 – 175 | Viscosity @ 25oC (mPa.s) : 2,000 – 5,000 | CAS # : 9003-36-53 | 42423-25-6
Posted in PO PM Product
Lapox P-122 (ARP-14 A) | Bisphenol-A based solid resins;functional powder coatin;rebar coating; protective coating
Epoxy equivalent weight (g/eq) : 862 – 935 | Viscosity @ 25oC (mPa.s) : 620 – 900 | Softening point (oC) : 100 – 110
Posted in PO PM Product
Lapox P-62 (ARP-13) | Bisphenol-A based solid resins; standard solid resin; powder coating; protective coating
Epoxy equivalent weight (g/eq) : 741 – 800 | Viscosity @ 25oC (mPa.s) : 600 – 700 | Softening point (oC) :95 – 101
Posted in PO PM Product
Lapox P-10 (ARP-14 E) | Bisphenol-A based solid resins, esterifcation, anodic electrodeposition, protective coating
Epoxy equivalent weight (g/eq) : 847 – 926 | Viscosity @ 25oC (mPa.s) : 430 – 550 | Softening point (oC) : 90 – 100
Posted in PO PM Product
Lapox P-6 (ARP-19) | Bisphenol-A based solid resins; type 9; can coating; coil coating
Epoxy equivalent weight (g/eq) :2,381 – 2,941 | Viscosity @ 25oC (mPa.s) :5,000 – 10,000 | Softening point (oC) :125 – 140
Posted in PO PM Product
Lapox P-5 (ARP-17) | type 7; stoving lacquers; can coating; tube coating; Bisphenol-A based solid resins
Epoxy equivalent weight (g/eq) : 1,695 – 1,887 | Viscosity @ 25oC (mPa.s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120
Posted in PO PM Product
Lapox P-4 (ARP-14) | Bisphenol-A based solid resins; type 4; enamels; can coating; tube coating
Epoxy equivalent weight (g/eq) : 833 – 893 | Viscosity @ 25oC (mPa.s) : 550 – 700 | Softening point (oC) : 90 – 102
Posted in PO PM Product
Lapox P-3 (ARP-11) | Bisphenol-A based solid resins; type 4; esterification; enamels; exterior coating of can; tube coating; protective coating
Epoxy equivalent weight (g/eq) : 450 – 465 | Viscosity @ 25oC (mPa.s) : 160 – 190 | Softening point (oC) : 65 – 75
Posted in PO PM Product
Lapox ARP-14 HF | Bisphenol-A based solid resins; modified resin; powder coating; better flow; protective coating
Epoxy equivalent weight (g/eq) : 781 – 855 | Viscosity @ 25oC (mPa.s) : 480 – 580 | Softening point (oC) : 85 – 90
Posted in PO PM Product
Lapox ARP-13 LV | Bisphenol-A based solid resins; hybrid powder coating; protective coating
Epoxy value (Eq/kg) : 1.33 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 600 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 | Softening point (oc) : 95 – 101
Posted in None
Lapox ARP-13 HT | Bisphenol-A based solid resins; powder coating; protective coating
Epoxy equivalent weight (g/eq) : 769 – 847 | Viscosity @ 150oC (mPa.s) : 6,000 – 8,000 | Glass transition temperature (Tg) oc : Min 55
Posted in PO PM Product
Lapox ARP-12 | Bisphenol-A based solid resins; medium molecular weight; powder coating; protective coating
Epoxy equivalent weight (g/eq) : 653 – 704 | Viscosity @ 25oC (mPa.s) : 375 – 475 | Softening point (oC) : 80 – 90
Posted in PO PM Product
Lapox B-47 | Bisphenol-A based modified liquid epoxy resin; high gloss; heavy duty flooring; solids coating; grout; crack-filling
Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.20 – 5.50 | Viscosity @ 25oC (mPa s) : 450 – 650
Posted in PO PM Product
Lapox ARPN-52 (L-552) | Bisphenol-A based modified liquid epoxy resin; FRP; composites; aerospace; Epoxy Phenol Novolac resin; modified resin; high functionality; static condition; dynamic condition; ambient temperature; elevated temperature
Colour (APHA) : Max 2 | Epoxy equivalent weight (g/eq) : 146 – 150 | Viscosity @ 25oC (mPa.s) : 1,000 – 1,500
Posted in PO PM Product
Lapox ARL-143 | Bisphenol-A based modified liquid epoxy resin; low viscosity; fire retardant
Epoxy equivalent weight (g/eq) : 195 – 205 | Viscosity @ 25oC (mPa.s) : 1,500 – 2,500
Posted in PO PM Product
Lapox ARL-136 | Bisphenol-A based modified liquid epoxy resin; filament winding; pultrusion
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 175 – 189 | Viscosity @ 25oC (mPa.s) : 2,500 – 4,500
Posted in PO PM Product
Lapox ARL-135 LV | Bisphenol-A based modified liquid epoxy resin; FRP ; composites
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 169 – 185 | Viscosity @ 25oC (mPa.s) : 1,000 – 1,500
Posted in PO PM Product
Lapox ARL-135 | Bisphenol-A based modified liquid epoxy resin; FRP; composites
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 169 – 185 | Viscosity @ 25oC (mPa.s) : 1,700 – 2,500
Posted in PO PM Product
Lapox ARB-33 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; grout; maintenance; protective coating
Colour (APHA) : Max 150 | Epoxy equivalent weight (g/eq) : 180 – 195 | Viscosity @ 25oC (mPa.s) : 500 – 700
Posted in PO PM Product
Lapox ARB-32 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor top coating; crack-filling; solids coatings; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 195 – 215 | Viscosity @ 25oC (mPa.s) : 500 – 700
Posted in PO PM Product
Lapox ARB-30 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor coating; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 182 – 200 | Viscosity @ 25oC (mPa.s) : 4,500 – 5,500
Posted in PO PM Product
Lapox ARB-28 | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor coating; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 182 – 200 | Viscosity @ 25oC (mPa.s) : 1,500 – 2,000
Posted in PO PM Product
Lapox ARB-26 | Bisphenol-A based modified liquid epoxy resin; floor coating; high gloss; defect free surface; protective coating
Colour (APHA) : Milky white liquid | Epoxy equivalent weight (g/eq) : 192 – 205 | Viscosity @ 25oC (mPa.s) : 450 – 750
Posted in PO PM Product
Lapox ARB-22 (XR-118) | Bisphenol-A based modified liquid epoxy resin; primer; mortar; floor coating; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 192 – 204 | Viscosity @ 25oC (mPa.s) : 800 – 1,200
Posted in PO PM Product
Lapox B-11 | standard viscosity; Bisphenol-A based unmodified liquid epoxy resin; LER; BLR; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 184 – 191 | Viscosity @ 25oC (mPa.s) : 11,000 – 15,000 | CAS # : 1675-54-3 | 25068-38-6
Posted in PO PM Product
Lapox B-9 | low viscosity; Bisphenol-A based unmodified liquid epoxy resin; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 180 – 187 | Viscosity @ 25oC (mPa.s) : 8,000 – 11,000 | CAS # : 1675-54-3 | 25068-38-6
Posted in PO PM Product
Lapox B-7 | semi-solid; can coating; coil coating; protective coating
Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 3.57 – 4.45 | Viscosity @ 25oC (mPa s) : 450 – 800
Posted in None
Lapox ARL-141 | High viscosity; Bisphenol-A based unmodified liquid epoxy resin; high reactivity; protective coating
Colour (APHA) : Max 150 | Epoxy equivalent weight (g/eq) : 213 – 233 | Viscosity @ 25oC (mPa.s) : 20,000 – 26,000
Posted in PO PM Product
Lapox AR-101 | standard viscosity; Bisphenol-A based unmodified liquid epoxy resin; protective coating
Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 184 – 191 | Viscosity @ 25oC (mPa.s) : 11,000 – 15,000 | CAS # : 1675-54-3 | 25068-38-6
Posted in PO PM Product