Updates

Author: cmspresident

Polygrip SP 9

A sprayable synthetic rubber-based adhesive. The product is especially designed to provide long tack retention time (open time), suitable for bonding large components. It is recommended for bonding a variety of substrates such as foam to foam, foam to painted

Posted in Polymer Retail

Polygrip SH

A water-based milky white polyvinyl acetate based adhesive. The product is especially used in furniture industry for bonding wood to other substrates. It is also suitable for adhering similar and dissimilar substrates to achieve strong bonds. Pack size: 50 kg

Posted in Polymer Retail

Polygrip S (TF)

A brown coloured, fast curing, toluene-free synthetic rubber-based adhesive. The product is versatile and suitable for most of the substrates such as rubber, leather, wood, rexin, canvas and foam. It is also suitable for adhering similar and dissimilar substrates to

Posted in Polymer Retail

Polygrip RTU

A solvent-based, sprayable polyurethane adhesive which is used in combination with Polygrip HR hardener in a specified ratio. The system is recommended for bonding PVC sheet to wood for membrane door applications. The system has good area coverage with faster

Posted in Polymer Retail

Polygrip Rapid NXT

A synthetic polymer-based adhesive for spray application. The product offers low viscosity and quick drying time with maximum tack retention time of eight minutes. It is ideal for chair and large size sofa manufacturing applications, which require long tack time

Posted in Polymer Retail

Polygrip PG 40

A transparent liquid recommended as a primer for EVA substrates before application. Pack size: 1 L and 30 L

Posted in Polymer Retail

Polygrip MP (TF)

A fast curing, toluene-free, synthetic rubber-based adhesive. The product is versatile and suitable for most of the substrates such as rubber, wood, rexin, canvas and foams. It is also suitable for adhering similar and dissimilar substrates to achieve strong bonds.

Posted in Polymer Retail

Polygrip Locktape

A pressure sensitive paper tape for general purpose. The product can be used for marking, sealing, holding, bundling and other various jobs where temporary bonding is required. Pack size: 18 mm x 20 m and 24 mm x 20 m

Posted in Polymer Retail

Lapox Ultrafast

A one-component, solvent-free, room temperature curing cyanoacrylate adhesive. The product is useful in bonding plastic, flex, PVC, leather, rubber, glass and metal components where instant bonding is required. Pack size: 20 g and 50 g

Posted in Polymer Retail

Lapox Ultrabond UPVC

A solvent cement for joining UPVC pipes and fittings. The product is suitable for 6″ Schedule 40 pipes and 4″ Schedule 80 pipes. It conforms to ASTM D2564 standard. Pack size: 20 ml, 50 ml, 100 ml and 200 ml

Posted in Polymer Retail

Lapox Ultrabond CPVC

A solvent cement for joining CPVC pipes and fittings used for hot and cold water up to a maximum of 1800 F (820 C). The product is a yellow coloured, low VOC emission, fast setting, high strength CPVC solvent cement.

Posted in Polymer Retail

Lapox Ultra++

A two-component, modified epoxy adhesive. The product has excellent adhesion for bonding similar and dissimilar substrates such as ceramic, glass, marble, metal, stone and wood. Pack size: 1.8 kg and 9 kg

Posted in Polymer Retail

Lapox Procoat

A two-component, acrylic polyol and aliphatic isocyanate based polyurethane (PU) coating. The product is designed to protect the base waterproof layer as well as decorate the substrate. Polyurethane (PU) coating is a tough protective paint applied on exterior and interior

Posted in Polymer Retail

Lapox Marbobond HP

A solvent-based, transparent epoxy system. The product has a long pot life (80 – 110 minutes) to suit industry requirements. It easily penetrates into cracks due to its low viscosity. It exhibits good water resistance. Pack size: 1.5 kg and

Posted in Polymer Retail

Lapox Gem

A two-component, modified, viscous epoxy adhesive system. The product is best suitable in ceramic and handicraft industries. Pack size: 1.8 kg, 9 kg, 45 kg and 90 kg

Posted in Polymer Retail

Lapox Epogrout

A three-component, stain-free, waterproof epoxy tile grout especially designed for filling tile joints in wall and floor applications of ceramic tile, vitrified tile, mosaic, stone and structural glazed blocks. It is available in attractive shades. Pack size: 1 kg and

Posted in Polymer Retail

Lapox Clearset

A two-component, modified, solvent-less, viscous epoxy adhesive system. The product has a pot life of 60 – 75 minutes to suit industry requirements. Pack size: 500 g, 1 kg, 2 kg and 10 kg

Posted in Polymer Retail

Lapox Clear Glow

A two-component, modified, epoxy coating system. The product provides excellent smooth and glossy finish. It is widely used in lamination and coating on metal plates and household articles such as keychains, badges and trophies. Pack size: 1.5 kg and 7.5

Posted in Polymer Retail

Lapox Banglegrip S

A two-component, modified, solvent-less, viscous epoxy system. The product has a long pot life (250 – 300 minutes) to suit industry requirements. It can absorb fillers to make a paste thick. It exhibits good mechanical properties. Pack size: 1.8 kg

Posted in Polymer Retail

Lapox Banglefix

A two-component, modified, fast setting, viscous epoxy adhesive system. The product has a pot life of 40 – 50 minutes to suit industry requirements. It is best suitable for fixing gem stones and pearls in bangles. Pack size: 1.8 kg

Posted in Polymer Retail

May 2021: One spray, many solutions!

An effective, indigenously developed multipurpose maintenance spray that provides anti-rust properties, protects against corrosion, lubricates, removes stickiness and displaces moisture. With a refreshing citrus fragrance, Lacare AM 70 is available in three sizes.

Posted in PO Retail Updates

May 2021: Lapox Granito Cast in action!

A two-component, solvent-less, transparent epoxy system. The product can be easily poured due to its low viscosity. It has a long pot life which is required for achieving high thickness casting up to 25 mm. It creates bubble-free and crack-free

Posted in PO Retail Updates

March 2021: Atul enters its 70th year of operations!

Atul’s Polymers – Retail business celebrates as the Company enters its 70th year of operations.

Posted in PO Retail Updates

June 2021: Four Star Export House

We are happy to announce that Atul Ltd has been recognised as a Four Star Export House by the Ministry of Commerce and Industry, Government of India, for excelling in international trade and contributing to India’s foreign trade.

Posted in Global Updates

Para Anisic aldehyde, Food Grade

A key ingredient compliant to food safety standards, for imparting floral and almond-like note to flavours and | or fragrances used for industrial and consumer products.

Posted in Aromatics

April 2021: Nouryon partners Atul for MCA

MCA is used as an essential raw material for a variety of products, such as adhesives, pharmaceuticals and crop protection chemicals. Nouryon and Atul successfully started production at Anaven, a new joint venture in Gujarat, that will help meet the

Posted in Global Updates

March 2021: Indian soul • global footprint

Atul Ltd provides value-added services to manufacturers and customers of chemical products by offering a platform to establish meaningful business relationships. Read more: www.atul.co.in/value-added-services/

Posted in Global Updates

October 2020: Ankur – a project of Atul Foundation to nourish the mind and body

Atul Foundation imparting education to children and taking care of their nutrition. Your browser does not support the video tag.

Posted in Global Updates

APIN-10

Chemistry : 4,4’-Dichlorodiphenyl sulfone | Appearance : White powder | Melting point (oC) : 147 – 150 | Purity by HPLC (%) : Min 99.7 | Ash content (%) : Max 0.10

Posted in PO PM Product

Lapox APR-104 | Alkyl phenolic resins

Appearance : Pale yellow lumps | Colour (Gardner) : Max 7 | Methylol content (%) : 8 – 12 | Softening point oC : 70 – 90

Posted in PO PM Product

Lapox APR-103 | Alkyl phenolic resins

Appearance : Dark violet lumps | Methylol content (%) : 12 – 16 | Softening point oC : 85 – 105

Posted in PO PM Product

Lapox APR-102 | Alkyl phenolic resins

Appearance : Pale yellow lumps | Colour (Gardner) : Max 6 | Methylol content (%) : 14 – 17  | Softening point oC : 90 – 100

Posted in PO PM Product

Lapox APR-101 | Alkyl phenolic resins

Appearance : Pale yellow lumps | Colour (Gardner) : Max 4 | Methylol content (%) : 8 – 12 | Softening point oC : 65 – 80

Posted in PO PM Product

Lapox ARPN-53 | Epoxy phenol novolac resins; epoxy phenol novolac solution; chemical resistant coating; electrical applications; composite applications; protective coating

Colour (Gardner) : Max 4 | Epoxy equivalent weight (g/eq) : 167 – 179 | Viscosity @ 25oC (mPa.s) : 35,000 – 55,000

Posted in PO PM Product

September 2020: Atul turns 73

Your browser does not support the video tag.

Posted in Global Updates

Lapox ARCH-18 | Cycloaliphatic resins; higher toughness; outdoor coating; electrical casting; flooring; protective coating; UV resistance

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 130 – 143 | Viscosity @ 25oC (mPa.s) : 250 – 450 | CAS # : 2386-87-0

Posted in PO PM Product

Lapox ARCH-13 LV | Cycloaliphatic resins; higher toughness; outdoor coating; electrical casting; flooring; protective coating; UV resistance

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 210 – 230 | Viscosity @ 25oC (mPa.s) : 1,300 – 2,500 | CAS # : 30583-72-3

Posted in PO PM Product

Lapox ARP-24 X 80 | Solvent cut resins; polyester film coating; high molecular weight epoxy solution; primer; enamel; coating high flexibility

Epoxy equivalent weight (g/eq) : 300 – 336 | Viscosity @ 25oC (mPa.s) :  3,500 – 7,000 | Non-volatile content (%) : 79 – 81

Posted in PO PM Product

Lapox L-249 | Brominated resins; brominated resin solution; solution in methyl ethyl ketone; FR-4 laminates; fire retardant

Epoxy equivalent weight (g/eq) : 319 – 410 | Bromine content (%) : 44 – 48

Posted in PO PM Product

Lapox L-247 | Brominated resins; brominated resin solution; solution in methyl ethyl ketone; FR-4 laminates; fire retardant

Epoxy equivalent weight (g/eq) : 250 – 280 | Viscosity @ 25oC (mPa.s) : 700 – 1,100 | Bromine content (%) : 21 – 26

Posted in PO PM Product

Lapox ARP-13 LV | Bisphenol-A based solid resins; powder coating; protective coating

Epoxy equivalent weight (g/eq) : 714 – 752 | Viscosity @ 25oC (mPa.s) : 500 – 600 | Softening point oc : 95 – 101

Posted in PO PM Product

Lapox B-47 (ARB-18) | Bisphenol-A based modified liquid resins

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 177 – 187 | Viscosity @ 25oC (mPa.s) : 450 – 650

Posted in PO PM Product

Lapox B-42 (ARB-19) | Bisphenol-A based modified liquid resins;

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 182 – 200 | Viscosity @ 25oC (mPa.s) : 5,000 – 6,500

Posted in PO PM Product

Lapox B-41 (ARB-20) | Bisphenol-A based modified liquid resins;

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 179 – 192 | Viscosity @ 25oC (mPa.s) : 900 – 1,100

Posted in PO PM Product

Lapox ARC-44 | Bisphenol-A based modified liquid epoxy resin

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 218 – 226 | Viscosity @ 25oC (mPa.s) : 2000 – 2500

Posted in PO PM Product

Lapox ARC-43 | Bisphenol-A based modified liquid epoxy resin

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 220 – 255 | Viscosity @ 25oC (mPa.s) : 300 – 600

Posted in PO PM Product

Lapox ARB-47 | Bisphenol-A based modified liquid epoxy resin

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 180 – 195 | Viscosity @ 25oC (mPa.s) : 400 – 700

Posted in PO PM Product

Lapox ARB-44 | Bisphenol-A based modified liquid epoxy resin

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 189 – 204 | Viscosity @ 25oC (mPa.s) : 1,400 – 2,600

Posted in PO PM Product

Lapox ARB-43 | Bisphenol-A based modified liquid epoxy resin

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 180 – 193 | Viscosity @ 25oC (mPa.s) : 7,500 – 9,000

Posted in PO PM Product

Lapox B-770 | Bisphenol-A based unmodified liquid epoxy resin

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 280 – 300 | Viscosity @ 25oC (mPa.s) : 500 – 1,500

Posted in PO PM Product

Lapox B-7 | semi-solid; Bisphenol-A based unmodified liquid epoxy resin; can coating; coil coating; protective coating

Colour (APHA) : Max 100 | Epoxy equivalent weight (g/eq) : 225 – 280 | Viscosity @ 25oC (mPa.s) : 450 – 800

Posted in PO PM Product

June 2020: Urmi offers abhayā kadha mix

pure · wholesome · energising As the world tackles the COVID-19 pandemic, Urmi offers an effective ayurvedic kadha blend prepared with the finest of ingredients using an 800-year old tried and tested recipe. It is a recognised preventive for coronavirus

Posted in Global Updates

May 2020: Stepping up support

Atul Institute of Vocational Excellence (AIVE) has taken responsibility to develop 125 micro-entrepreneurs in various trades such as industrial sewing, air conditioning and refrigeration maintenance, mushroom harvesting, welding and mobile repairing. As the world faces a severe health challenge posed

Posted in Global Updates

May 2020: Touching lives

As the COVID-19 pandemic continues to loom over us, many homeless individuals and workmen are sometimes unable to even get one meal a day. To alleviate their suffering, Atul Foundation recently joined hands with Lokmangalam Charitable Trust to provide meals

Posted in Global Updates

May 2020: COVID-19: winning together

In step with our commitment to work together to overcome the ongoing COVID-19 pandemic, Atul Ltd has made a humble contribution of INR 3 cr to the PM CARES Fund and INR 2 cr to the Gujarat Chief Minister Relief

Posted in Global Updates

March 2020: Celebrating Women’s Day at Atul

Glimpses from the Women’s Day celebration at Atul, Gujarat. Talented, hardworking and happy women in our offices are making team Atul more powerful.

Posted in Global Updates

December 2019: Team Floras at SIAL

The Floras business of Atul Ltd recently participated at the 2019 edition of SIAL Middle East held at the Abu Dhabi National Exhibition Centre. It was lovely meeting everyone! The Global Food Marketplace (French: Salon International de l’alimentation, or SIAL)

Posted in Global Updates

November 2019: Team Atul at CPhI India

Members of Team Atul at CPhI India – teamwork makes the dream work!

Posted in Global Updates

October 2019: £ 2.5 m facility expansion at DPD Ltd

Your browser does not support the video tag.

Posted in Global Updates

September 2019: 5S launch program

The Company believes that 5S is key to achieve its goal of sustainable development. We had initiated the 5S movement a few years ago and have been implementing the initiative in our manufacturing plants at a base level. It is

Posted in Global Updates

Lapox APR-103 | Alhyl phenol formaldehyde resin; p-tert butyl phenol; polychloroprene rubber; Longer tack time; Footwear; Carpet; leather; Furniture; automotive;

Appearance : Dark violet lumps | Colour (Gardner) : > 18 | Methylol content (%) : 12 – 16 | Softening point (oC): 85 – 105

Posted in PO PM Industry

Lapox APR-102 | Alhyl phenol formaldehyde resin; p-tert butyl phenol; polychloroprene rubber; Longer tack time; Footwear; Carpet; leather; Furniture; automotive;

Appearance : Pale yellow lumps | Colour (Gardner) : Max 6 | Methylol content (%) : 14 – 17 | Softening point (oC) : 90 – 100

Posted in PO PM Industry

Lapox APR-101 | Alhyl phenol formaldehyde resin; p-tert butyl phenol; polychloroprene rubber; Longer tack time; Footwear; Carpet; leather; Furniture; automotive;

Appearance : Pale yellow lumps | Colour (Gardner) : Max 4 | Methylol content (%) : 8 – 12 | Melting point, capillary (oC) : 63 – 75 | Softening point (oC) : 65 – 80

Posted in PO PM Industry

August 2019: Yuvaan

Yuvaan, a fun-filled entertainment and engagement program to exhibit the talent of our team members was organised at Atul last week. The event fostered greater involvement and bonding with a variety of programs such as singing, dancing, drama and stand-up

Posted in Global Updates

July 2019: 42nd Annual General Meeting of Atul Ltd

The 42nd Annual General Meeting of the Members of Atul Ltd was held on Wednesday, July 31, 2019 at Ahmedabad Management Association in Ahmedabad.

Posted in Global Updates

June 2019: Green Gujarat Awards 2019

Green Gujarat Awards 2019 was awarded to Atul Ltd, Ankleshwar on the World Environment Day, June 5, 2019. The award was received from Shri Ganpatbhai Vasava, the Honourable Minister of Environment and Forest, Government of Gujarat. Honourable Minister of Energy,

Posted in Global Updates

June 2019: 5S Kaizen Excellence Award

RE team participated in Kaizen competition – 5S for Cultural Transformation at Home, Workplace and New India held on May 21 and May 22, 2019 in Surat. They shared best practices in implementation of 5S in respective units at Atul

Posted in Global Updates

Allyl caproate | CAS No. 123-68-2 | Allyl hexanoate; Hexanoic acid , 2-propenyl ester; aldehyde C19; Allyl ncaproate;2-Propenyl n – hexanoate; hexanoic acid, 2-propen-1- yl ester ; prop-2-en -1-yl hexanoate; prop-2-enylhexanoate; 2- propenyl hexanoate

An aroma ingredient to enhance pineapple, fruity, sweet and juicy odour, widely used by cosmetics and flavour industry.

Posted in Aromatics

Allyl heptanoate | CAS No. 142-19-8 | 2-Propenyl n – hexanoate

An aroma chemical with fruity, wine and banana like odour, used to make flavours and fragrances for personal care industry.

Posted in Aromatics

2-Methylcyclohexyl acetate (o-MCHA) | CAS No. 5726-19-2 | ortho Methyl cyclo hexyl acetate

A value added down-stream of ortho Cresol, which plays a key role in the manufacturing of hydrogen peroxide (H2O2). Atul Ltd is the only manufacturer of 2-Methylcyclohexyl acetate, with a captive source of ortho Cresol.

Posted in Aromatics

2 nitro para cresol | CAS No. 119-33-5 | 4-Methyl-2-nitrophenol

A dye intermediate in organic synthesis.

Posted in Aromatics

May 2019: Analyst Meet, Mumbai

Atul organised its annual Analyst Meet last week in Mumbai to share the performance of the Company.

Posted in Global Updates

April 2019: a new world @ their fingertips

As a small step forward in our endeavour to impart quality education to children of interior villages, Atul Foundation recently donated five tablets to a zilla parishad village school in the drought-hit Maan taluka of Satara, Maharashtra. So far, this

Posted in Global Updates

March 2019: 48th National Safety Week celebration

The 48th National Safety Week was celebrated from March 4-11, 2019. Various activities were organised to create awareness on industrial safety among members of the Atul family.

Posted in Global Updates

March 2019: CAC, Shanghai

Our Crop Protection team participated in China International Agrochemical and Crop Protection Exhibition, Shanghai. The Businesses took this opportunity to meet customers and business partners to discuss products, services and more.

Posted in Global Updates

January 2019: Atul at ICERP

Polymers Performance Materials Business participated in ICERP 2019 that was held at the Bombay Exhibition Center in Mumbai. The Businesses took this opportunity to share ideas and technical expertise with our customers.

Posted in Global Updates

December 2018: Nouryon’s visit to Atul Vidyamandir

Nouryan has partnered with Atul Foundation to provide iron-folic acid tablets to students of three institutes managed by the Foundation. The objective of this initiative is to improve haemoglobin levels of students (particularly tribal children). After conducting blood tests, students

Posted in Global Updates

November 2018: Polygrip® HVAC used for high-quality AC duct insulation for Statue of Unity

We are delighted to share that one of Atul’s products, Polygrip HVAC, was used for high-quality AC duct insulation during the construction of the Statue of Unity that was unveiled today by Narendra Modi, the Prime Minister of India.

Posted in Global Updates

November 2018: Polygrip® HVAC used for high-quality AC duct insulation for Statue of Unity

We are delighted to share that one of Atul’s products, Polygrip HVAC, was used for high-quality AC duct insulation during the construction of the Statue of Unity that was unveiled today by Narendra Modi, the Prime Minister of India.

Posted in PO Retail Updates

Lapox ARTF-39 | aerospace; multifunctional resin; MDA; high performance; Composites

Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 150oC (mPa s) : 2,500 – 4,000

Posted in PO PM Industry

Lapox ARTF-32 | aerospace; multifunctional resin; specialty resin; MDA based; Methylenediamine

Colour (Gardner) : Max 18 | Epoxy value (Eq/kg) : 7.40 – 8.50 | Viscosity @ 150oC (mPa s) : 2,000 – 4,000

Posted in PO PM Industry

Lapox 37% Formaldehyde | Construction; Formaldehyde; thermoset resin; chemical synthesis; 37% formaldehyde; Coatings

Appearance : Clear colourless solution | Formaldehyde content: 37 ± 0.50 | Methanol content: Max 5 | Specific gravity : 1.095 – 1.115 | pH : 2.80 – 5.00

Posted in PO PM Industry

Lapox ARL-13 | aerospace, bifunctional resin

Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,000

Posted in PO PM Industry

October 2018: Award for Excellence by The Institute of Cost Accountants of India

Atul Ltd has won the 1st prize for Excellence in Cost Management at the 15th National Awards presented by The Institute of Cost Accountants of India, under the category of Private – Manufacturing – Large (with turnover between Rs 2,500

Posted in Global Updates

Lapox 37% Formaldehyde | Construction; Formaldehyde; thermoset resin; chemical synthesis; 37% formaldehyde; Coatings

Appearance : Clear colourless solution | Formaldehyde content: 37 ± 0.50 | Methanol content: Max 5 | Specific gravity : 1.095 – 1.115 | pH : 2.80 – 5.00

Posted in PO PM Product

Lapox ARN-16 | bifunctional; Naphthalene based; structural adhesive; high performance

Colour (Gardner) : Max 16 | Viscosity @ 50oC (mPa.s) : 1,000 – 2,500 | HyCl (%) : Max 0.20

Posted in PO PM Product

Lapox ARTF-39 | aerospace; multifunctional resin; distilled unmodified resin; m-amino phenol based; high performance

Colour (Gardner) : Max 10 | Epoxy equivalent weight (g/eq) : 125 -143 | Viscosity @ 150oC (mPa.s) : 2,500 – 4,000 | HyCl (%) : Max 0.10

Posted in PO PM Product

Lapox ARTF-32 | aerospace; multifunctional resin; specialty resin; MDA based; high performance

Colour (Gardner) : Max 18 | Epoxy equivalent weight (g/eq) : 118 – 135 | Viscosity @ 150oC (mPa.s) : 2,000 – 4,000 | HyCl (%) : Max 0.10 | CAS # : 142675-09-0

Posted in PO PM Product

June 2018: Chemspec Europe

The Aromatics, Bulk Chemicals and Pharmaceuticals Businesses participated in Chemspec Europe that was held in Cologne, Germany. The Businesses took this opportunity to meet customers and business partners to discuss products, services and more.

Posted in Global Updates

June 2018: World Environment Day

Atul has been committed to environment conservation since its inception. As part of World Environment Day celebrations, a range of activities were organised to spread awareness about sustainable development, particularly environment protection. The week-long celebration kicked off with the screening

Posted in Global Updates

Lapox AH-338 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-337 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-336 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-335 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-334 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-333 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-332 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa.s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Lapox AH-311 | aliphatic amine; curing agent; composite; adhesive; coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 10 – 150 | Pot life @ 25oC : 10 min – 10 hr | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

May 2018: Analyst Meet.

Atul Ltd organised its annual Analyst Meet on May 4 at Vivanta by Taj-President to share performance details and future plans of the Company with fund managers, asset management companies, brokerage firms, mutual funds, analysts and other stakeholders. About 200

Posted in Global Updates

April 2018: urmi dukān – a step forward in the Urmi journey

Urmi was founded in 1953 by Atul Ltd with the objective of women empowerment. Over the years, sun dried, pounded and traditionally prepared spices have become the identity of the organisation. Each step of the production process is looked after

Posted in Global Updates

Lacare AM 70

A multi-purpose maintenance spray. The product is especially designed to meet the requirements of preventive and corrective maintenance for industrial use, automobiles, service centres and common household applications. Pack size: 45 g, 85 g and 328 g (400 ml)

Posted in Polymer Retail

Lacare Channel Spray

A superior polymer-based spray. The product is used for improving the sliding movement of glass in car windows. It is especially made to lubricate the rubber beading, plastic and other assemblies used in the sliding windows of automobiles. Pack size:

Posted in Polymer Retail

Lacare Chain Lube

A superior oil-based chain lubricant. The product is ideal for open chains of motorbikes driven at high speeds where the chain may be exposed to moisture and dust. It reduces friction, resists moisture and rusting, thereby increasing the life of

Posted in Polymer Retail

LAPOX® TILEGRIP: a recent addition to our Lapox® brand

LAPOX® TILEGRIP: a high performance, cementitious tile fixing adhesive APPLICATIONS – Fixing floor and wall tiles (internal and external) – Fixing thin bed tiles and medium format tiles – Cladding of vitrified tiles, ceramic tiles, porcelain, mosaic, granite and marble

Posted in PO Retail Updates

LACARE® CHANNEL SPRAY: a recent addition to our Lacare® brand

Lacare® is a recently introduced range of maintenance products for automobile, industrial and household applications. Channel spray: – Can be applied on rubber channels of glass windows used in cars – Ensures the smooth movement of manual and power window

Posted in PO Retail Updates

LACARE® CHAIN LUBE: a recent addition to our Lacare® brand

Lacare® is a recently introduced range of maintenance products for automobile, industrial and household applications. Chain Lube: – Can be applied on open chains of bikes driven at high speeds + standard chains, O-ring chains, X-ring chains and Z-ring chains

Posted in PO Retail Updates

February 2018: Urmi – Business opportunity

Urmi was founded by Atul Ltd in 1953 with an objective to empower women by engaging them in purposeful activities. Over the years, fresh and traditionally prepared spices, handmade by women from surrounding villages, have become the identity of the

Posted in Global Updates

February 2018: SILVER SHIELD – ICAI award for Excellence

We are delighted to share that Atul’s Annual Report 2016-17 recently won the Silver Shield by a Jury chaired by Shri M Damodaran, former Chairman, Securities and Exchange Board of India (SEBI), amongst the entries received under the Manufacturing Sector

Posted in Global Updates

March 2018: Visit us at CAC, Shanghai

Team Atul invites you to visit CAC 2018. We look forward to sharing more information on our products and technical expertise with our customers and partners. It will be a pleasure to meet you.

Posted in Global Updates

March 2018: Visit us at JEC WORLD | PAINT INDIA

Polymers Performance Materials business takes pleasure in inviting you to JEC WORLD | PAINTINDIA 2018. We will be showcasing our entire range of products and consider it an opportunity to share ideas and technical expertise with our customers. We hope

Posted in Global Updates

December 19, 2017: Remembering Shri Kasturbhai Lalbhai on his 123rd birth anniversary

It was not just the world of business that benefitted from Kasturbhai’s vision; he enriched the educational, social and cultural fabric of our nation with equal distinction. It was his steadfast adherence to values that made him truly remarkable. An

Posted in Global Updates

Lapox Granito ASR 200 | ASH 400

A two-component, solvent-less, transparent epoxy system. The product can be easily poured due to its low viscosity. It has a long pot life which is required for achieving high thickness casting up to 25 mm. It creates bubble-free and crack-free

Posted in Polymer Retail

November 2017: Atul at CPhI India

Atul representatives from Aromatics, Bulk Chemicals and Pharma Business participated at CPhI India, Mumbai.They reached out to customers and partners to discuss the solutions and high-quality products to satisfy their unique manufacturing requirements.

Posted in Global Updates

November 2017: Urmi now has its FSSAI license

Founded by Atul Ltd in 1953, Urmi works to empower women. Fresh and traditionally prepared spices are the identity of the organisation. Women from surrounding villages are engaged in drying, pounding, blending and packaging of these spices. Pounding gives a

Posted in Global Updates

October 2017: New power plant inauguration

On the auspicious day of Laabh Panchami 2017, Atul inaugurated its new power plant – the largest project in the history of the Company. The plant’s boilers, coal plant, turbine and ash handling units are DCS operated, and the entire

Posted in Global Updates

October 25, 2017: Colors Business inaugurated its new Analytical laboratory at Atul

On October 25, 2017 on the auspicious occasion of Laabh Pancham (Gyaan Panchami), our Colors Business inaugurated its new Analytical laboratory at Atul. Well-equipped with the latest spectroscopic instruments, this state-of-the-art facility will enhance the quality assurance of dyes and

Posted in Colors Updates

October 25, 2017: Colors Business inaugurated its new Analytical laboratory at Atul

On October 25, 2017 on the auspicious occasion of Laabh Pancham (Gyaan Panchami), our Colors Business inaugurated its new Analytical laboratory at Atul. Well-equipped with the latest spectroscopic instruments, this state-of-the-art facility will enhance the quality assurance of dyes and

Posted in Global Updates

October 2017: Visit us at AgroChemEx Shanghai, 2017

Atul will be participating at AgroChemEx Shanghai, 2017. AgroChemEx is an annual agrochemical symposium and exhibition organised by the China Crop Protection Industry Association. It provides a valuable platform for the exchange of information and business development opportunities by attracting

Posted in CP Brand Updates

September 2017: Efficax – a premium product launched by Crop Care

Efficax, launched by Atul, is a super spreader surfactant for agriculture use with high penetration. Key features of this product are outlined below. 100% pure trisiloxane increases efficacy of crop care chemicals used improves spraying efficiency safe to use with

Posted in CP Brand Updates

September 2017: National Aquatic Meet at Atul Vidyalaya

The 21st Association of Schools for the Indian School Certificate (ASISC) – National Aquatic Meet was held on September 30th and October 1st, 2017. The event was hosted for the fourth time by Atul Vidyalaya under the sponsorship of Atul

Posted in Global Updates

Lapox ARL-135 | AH-332 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

Lapox ARL-135 | AH-333 | industrial; RTM; hand lay-up and infusion systems; moderate viscosity system; small to large components

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (m Pas) : 700 – 1,200 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Product

September 19, 2017: Visit of Sadhguru Jaggi Vasudev to Atul – Rally for Rivers

Along with his team, Sadhguru is travelling by road from Kanyakumari to the Himalayas as part of Rally for Rivers, an initiative to spread awareness about the depletion of rivers and an urgent need to save them. Atul, located on

Posted in Global Updates

Lapox L-552 | K-552

Mixing ratio (Parts by weight) : 100 : 38 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 110 – 160 | Glass transition temperature (Tg) (o) : 115 – 130

Posted in PO PM Industry

Lapox ARD-57 (XR-104) | aerospace, aromatic-difunctional, aniline based reactive diluent, high performance composite

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 8.15 – 9.50 | Viscosity @ 25oC (mPa s) : 100 – 200

Posted in PO PM Industry

Lapox P-3 (ARP-11) | Bisphenol-A based solid resins. Type 1, protective coating, enamels

Epoxy value (Eq/kg) : 2.15 – 2.22 | Viscosity @ 25oC (mPa s) : 160 – 190 | Softening point (oC) : 65 – 75 |

Posted in PO PM Industry

Lapox ARCH-13 | AH-215

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 70 | Glass transition temperature (Tg) (oC) : 100 – 110 | Thermal class : F

Posted in PO PM Industry

Lapox ARC-16 | AH-118 | ADP-11 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Pre-filled, Hot cure Indoor

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 80 : 0 – 8 | Glass transition temperature (Tg) (oC) : 105 – 115 | Thermal class :

Posted in PO PM Industry

Lapox ARL-135 LV | AH-334 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 25 – 35 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox AH-618 (K-5200) | Aromatic amine; long pot life; Elevated temperature curing curing agent; high glass transition temperature; high Tg

Appearance : Yellow to brown liquid | Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa.s) : 100 – 300 | Amine value (mg KOH/g) : 628 – 634 | Mixing ratio (Parts by weight) : 24

Posted in PO PM Product

Lapox AH-315 | adhesives; casting; coating; composite applications; protective coatings; unmodified polyamine curing agent

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa.s) : 5 – 15 | Pot life @ 25oC (hours) : 7 – 9 | Mixing ratio (Parts by weight) : 32

Posted in PO PM Product

Coming soon

Coming soon

Posted in Life with Atul Updates

Coming soon

Coming soon

Posted in Life with Atul Updates

Coming soon

Coming soon

Posted in Life with Atul Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in Careers Updates

Coming soon

Coming soon

Posted in BI Updates

Launching BOND 70 Pan India retailer scheme

2017 marks the 70th anniversary of Atul Ltd. The history of the Company is closely linked to that of independent India: both started their journey in 1947 and endeavour to consistently improve over the years. In light of this, Polymers

Posted in PO Retail Updates

Launching ‘Lacare’

Polymers Retail is launching a new range of maintenance products under the brand Lacare for automobile, industrial and household applications. The upcoming product portfolio for this maintenance range is as follows: Generic name Application Multi-purpose maintenance spray Penetrates rust and

Posted in PO Retail Updates

Pilot launch of retail module at Valsad

Polymers Retail had a pilot launch of its retail module from April-June 2017 in Valsad, Pardi and Udwada. While it has been challenging for the Business to move from a no presence zone to a significant presence zone, the experience

Posted in PO Retail Updates

New R&D facility at Atul

New R&D facility at Atul

Posted in POPM Updates

Stall at ICERP – 2017

Polymers Performance Materials participated in ICERP 2017 in Mumbai. The exhibition was held on 10 – 12 January 2017. It gave us an opportunity to personally meet and discuss with the various personnel and decision makers of composites industry.

Posted in POPM Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Pharma Updates

Coming soon

Coming soon

Posted in Floras Updates

Flame Awards Asia, 2016

Atul Ltd received a certificate of merit for its greening the desert project by Flame Awards Asia, 2016

Posted in Floras Updates

Wholesome, fresh and delicious Barhee Dates now available at Atul

These fresh Barhee dates are from Atul’s farms in the beautiful Thar desert in Rajasthan and farmer fields in various parts of India, cultivated with Atul’s tissue culture raised date palms.

Posted in Floras Updates

Coming soon

Coming soon

Posted in CP Brand Updates

Coming soon

Coming soon

Posted in CP Brand Updates

Coming soon

Coming soon

Posted in CP Brand Updates

Coming soon

Coming soon

Posted in CP Bulk Updates

International Cropscience Conference and Exhibition

International Cropscience Conference and Exhibition

Posted in CP Bulk Updates

AgriBusiness Global – Trade Summit, Las Vegas, USA

AgriBusiness Global – Trade Summit, Las Vegas, USA

Posted in CP Bulk Updates

Launch of mobile application

Colors Business launched an innovative mobile application for effective customer service and was conferred with the Customer Excellence award.

Posted in Colors Updates

New machinery at Technical Services laboratory, Atul

Dr GVG Rao, President, Colors Business, inaugurated new machinery at the Technical Services (TS) laboratory, Atul. The TS laboratory focuses on customer support activities, particularly textile dyeing and printing application techniques.

Posted in Colors Updates

Seminar in Ethiopia

A representative from Colors Business participated in and conducted a technical seminar on ‘Selection, Evaluation, Application and Disposal of Dyes and Chemicals’ in Ethiopia. The seminar was organised by the Ethiopian Textile Industry Development Institute in twinning partnership with the

Posted in Colors Updates

Coming soon

Coming soon

Posted in BI Updates

Coming soon

Coming soon

Posted in BI Updates

Coming soon

Coming soon

Posted in Aromatics Updates

Coming soon

Coming soon

Posted in Aromatics Updates

Chemspec Europe – 2017, 31 May – 1 June 2017

Chemspec Europe – 2017, 31 May – 1 June 2017

Posted in Aromatics Updates

May 2017: Atul – AkzoNobel joint venture

AkzoNobel and Atul have announced their intention to jointly invest in the production of Monochloroacetic acid (MCA) in India. This will include setting up a world class MCA plant at the first manufacturing site of Atul located in Valsad (Gujarat).

Posted in Global Updates

April 2017: Atul declared a ‘cashless township’

On the occasion of Ambedkar Jayanti, Prime Minister Narendra Modi under the Niti Aayog’s Digi Dhan Vyapar Yojana declared Atul Ltd township in Valsad among the seventy five ‘cashless township’ of India, as more than 75% digital mode of payments

Posted in Global Updates

March 2017: Atul inaugurated its new office in Thane

Atul’s office in Thane.

Posted in Global Updates

Fresh Barhee date fruit available for sale at Atul

These fresh Barhee dates are from Atul’s farms in the beautiful Thar desert in Rajasthan and farmer fields in various parts of India, cultivated with Atul’s tissue-culture raised date palms.

Posted in Global Updates

2016-17: Atul Foundation organised eye and ENT camps benefitting 3,000+ patients

In 2016-17, Atul Foundation organised eye and ENT camps benefitting 3103 patients in 10 villages, 129 were operated for cataract and 551 were provided spectacles.

Posted in Global Updates

Biopearl – Seaweed extract | Biopearl; Seaweed extract

A bio-stimulant derived from seaweed extract (Ascophyllum nodusum). The product is used as a plant growth stimulant, enhancing plant vigour at critical stages and improving crop productivity.

Posted in Crop Protection Brands

Efficax – Silicone super spreader | Efficax; Silicone; Super spreader

A silicone based surfactant used as a tank mix with and herbicides, insecticides and fungicides to improve its bio-efficacy.

Posted in Crop Protection Brands

Xyris Gold – Pendimethalin 38.7% CS | Xyris Gold; Pendmethalin

A selective pre-emergence herbicide used to control most grasses and some broad-leaved weeds in various crops.

Posted in Crop Protection Brands

Xyris – Pendimethalin 30% EC | Xyris; Pendimethalin

A selective pre-emergence herbicide used to control most grasses and some broad-leaved weeds in various crops.

Posted in Crop Protection Brands

Ulmin – Atrazine 50% WP | Ulmin; Atrazine

A selective pre and early post-emergence herbicide of the Triazine group used to control a wide range of grasses and broad-leaved weeds in maize and sugarcane.

Posted in Crop Protection Brands

Photix – Bispyribac sodium 10% SC | Oryzae; Tricyclazole

A broad spectrum systemic post-emergence herbicide used to control grassy weeds such as Echinochloa spp, sedges and broad-leaved weeds in paddy.

Posted in Crop Protection Brands

Irio – Butachlor 50% EW | Irio; Butachlor

A selective, pre-emergence herbicide used to control most grasses and some broad-leaved weeds in transplanted paddy.

Posted in Crop Protection Brands

Cydus – Paraquat dichloride 24% SL | Cudus; Paraquat

A non-selective, post-emergence contact herbicide used to control annual grasses and broad-leaved weeds in tea, row crops and non-crop areas.

Posted in Crop Protection Brands

Oryzae – Tricyclazole 75% WP | Oryzae; Tricyclazole

A systemic insecticide with protective and curative action used to control blast in paddy.

Posted in Crop Protection Brands

Villo Gold – Sulphur 90% WDG | Villo gold; Sulphur

A sulphur based fertiliser for soil application used to overcome sulphur deficiencies and nutrition stress in plants and the soil.

Posted in Crop Protection Brands

Villo – Sulphur 80% WP | Villo; Sulphur

An inorganic contact fungicide with protective action and acaricidal activity. The product is recommended for controlling powdery mildews in various crops.

Posted in Crop Protection Brands

Mintho – Carbendazim 50% WP | Mintho; Carbendazim

A broad spectrum systemic fungicide of the Benzimidazole group used to control a range of diseases in various crops, with its protective and curative action.

Posted in Crop Protection Brands

Cantho – Copper oxychloride 50% WP | Cantho; COC; Copper oxychloride

A broad spectrum contact and protective fungicide and bactericide used to control wide range of fungal diseases in various crops.

Posted in Crop Protection Brands

Lypus – Imidacloprid 40% + Fipronil 40% WG | Lypus; Imida + Fipro; Imidacloprid + Fipronil

A systemic insecticide of the Neonicotinoid and Phenylpyrazole group with contact and stomach action. The product is used to control chewing and sucking insect pests.

Posted in Crop Protection Brands

Orax – Profenofos 50% EC | Orax; Profeno; Profenofos

A broad spectrum insecticide and acaricide of the Organophosphorus group used to control a range of chewing and sucking insects in various crops.

Posted in Crop Protection Brands

Galastar – Bifenthrin 10% EC | Galastar; Bifenthrin

A broad spectrum insecticide | miticide of the Synthetic pyrethroids group with contact and stomach action. The product is effective against a broad range of lepidopteran pests, sucking pests, mites and termites in various crops.

Posted in Crop Protection Brands

Balio – Chlorpyrifos 50% + Cypermethrin 5% EC | Balio; Chloro + Cyper; Chlorpyrifos + Cypermethrin

A non-systemic insecticide of Organophosphorus and Synthetic pyrethroids group with contact and stomach action. The product is used to control chewing and sucking insect pests.

Posted in Crop Protection Brands

Lapox Ultraquick

A one-component, solvent-free, nearly instant setting cyanoacrylate adhesive. It gets cured by absorbing moisture from atmosphere. The product is compatible with wide range of materials such as plastic, marble, wood, metal, glass and rubber. It is good for bonding small

Posted in Polymer Retail

Hexaconazole 5% EC | CAS No. 79983-71-4 | HS Code. 3808 92 90

A systemic fungicide that is used to control scab in apple, tikka leaf spot in groundnut, powdery mildew in mango and blast and sheath blight in rice.

Posted in Crop Protection Bulk Actives

Propiconazole technical 88% min | CAS No. 60207-90-1 | HS Code. 3808 92 90

A systemic fungicide of the Triazole group used to control fungal diseases. The product finds an application in wood preservation.

Posted in Crop Protection Bulk Actives

Lapox XR-110 | XH-68 | cable joints; composite adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Product

Lapox A-16 | AH-800 | rapid cure; similar substrate; dissimilar substrate; composite adhesive

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 3 – 7

Posted in PO PM Product

Lapox ARCH-11 | K-3 | K-13 | industrial; filament winding and pultrusion; hot cure system; out door application; UV resistance

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 105 –

Posted in PO PM Product

Lapox A-83 | K-83 | gap filling; standard adhesive; composite adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : Thixotropic | Pot life @ 25oC (minutes) : 35 – 45

Posted in PO PM Product

Lapox B-11 | K-48 | construction; Maintenance; repair; crack-filling; quick setting

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Product

Lapox B-47 | K-48 | construction; Maintenance; grouting; quick setting. excellent adhesion; good strength

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Product

Lapox B-11 | K-49 | construction; Maintenance; chemical resistant flooring; protection of metal structures; protection from corrosive chemicals; protection from alkali; protection from solvents

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110

Posted in PO PM Product

Lapox B-11 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; variable potlife system; excellent acid and alkali resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300

Posted in PO PM Product

Lapox ARPN-54 | K-41 | K-42 | construction; Maintenance; chemical resistant flooring; high viscosity system; variable pot life system; chemical resistance; industrial flooring

Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330

Posted in PO PM Product

Lapox ARPN-42 | AH-105 | construction; Maintenance; chemical resistant flooring; coal tar modified system; coating of pipes; vehile chassis; concrete structure

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Product

Lapox B-47 | AH-416 | Maintenance; self-leveling system; low viscosity system; excellent gloss; excellent hardness; moderate chemical resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox B-11 | AH-428 | Maintenance; self-leveling system; moderate viscosity system; excellent gloos; good chemical resistance; construction

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Product

Lapox ARB-26 | AH-416 | Maintenance; self-leveling system; low viscosity system; high gloss finish

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox ARB-22 | AH-428 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction

Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35

Posted in PO PM Product

Lapox ARB-22 | AH-416 | Maintenance; self-leveling system; long pot life; excellent mechanical properties; construction

Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60

Posted in PO PM Product

Lapox B-47 | K-41 | K-42 | Maintenance; mortar; screed; varying pot life; excellent chemical resistance; construction

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330

Posted in PO PM Product

Lapox B-47 | AH-714 | Maintenance; primer; low viscosity primer system; general application; construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150

Posted in PO PM Product

Lapox B-11 | AH-543 | Maintenance; primer; very low temperature curing; curing in high humidity; moist surface; construction

Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Product

Lapox ARA-30 | AH-735 | structural adhesive; high lap shear strength; composite adhesive

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 35 – 50

Posted in PO PM Product

Lapox ARA-17 | AH-354 | toughness; quick; composite adhesive

Mixing ratio (Parts by weight) : 100 : 80 | Mix viscosity @ 25oC (mPa s) : 75,000 – 1,25,000 | Pot life @ 25oC (minutes) : 8 – 10

Posted in PO PM Product

Lapox ARL-140 | AH-419 | industrial; tooling; laminating system; high Tg; high glass transition temperature; dimensional stability

Mixing ratio (Parts by weight) : 100 : 42 | Mix viscosity @ 25oC (mPa s) : 2,500 – 3,000 | Pot life @ 25oC (minutes) : 600 – 700 | Glass transition temperature (Tg) (oC) : 190 – 220

Posted in PO PM Product

Lapox ARL-138 | AH-339 | industrial; tooling; laminating system; standard tooling system; excellent Tg; excellent glass transition temperature

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 400 – 600 | Pot life @ 25oC (minutes) : 120 – 180 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Product

Lapox ART-24 | AH-326 | industrial; tooling; gel coat system; colourless gel coat system

Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115

Posted in PO PM Product

Lapox ART-23 | AH-326 | industrial; tooling; gel coat system; high hardness; high abrasion resistance; good finish

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ART-22 | AH-326 | industrial; tooling; gel coat system; high thermal conductivity; excellent hardness; excellent surface finish

Mixing ratio (Parts by weight) : 100 : 6 | Mix viscosity @ 25oC (mPa s) : Paste (grey) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 85 – 95

Posted in PO PM Product

Lapox ART-21 | AH-326 | industrial; tooling; gel coat system; general purpose

Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Product

Lapox ARTF-15 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 111,000 – 13,000

Posted in PO PM Industry

Cresol mixture | Phenol mixture

A cost effective substitute for cresylic acid and phenol.

Posted in Aromatics

TULACTV Navy CC | CAS No. Reactive Blue 250

An economical trichromatic navy dye with good dischargeability. The product is used to develop medium to dark shades.

Posted in Colors

TULACTIV Blue CC

A trichromatic blue dye with good dischargeability.

Posted in Colors

TULACTIV Ultra Carmine CC

A deep red dye used for scarlet, dark red, brown and burgundy shades.

Posted in Colors

TULACTIV Ultra Red CC

A red dye with high tinctorial strength and excellent build-up properties. The product is used to develop medium to dark shades.

Posted in Colors

TULACTIV Deep Red CC

A bluish red dye with high tinctorial strength.

Posted in Colors

TULACTIV Red CC

An economical bluish red dye used in trichromatic combinations.

Posted in Colors

TULACTIV Ultra Yellow CC

A golden yellow dye with high tinctorial strength used to develop deep shades with good all round fastness properties.

Posted in Colors

TULACTIV Yellow CC

A basic trichromatic golden yellow dye with good dischargeability.

Posted in Colors

TULAREVS Blue LF-R

A blue dye with good light fastness properties used for pale to medium shades.

Posted in Colors

TULAREVS Red LF-2B

A red dye with good light fastness properties used for pale to medium shades.

Posted in Colors

TULAREVS Yellow LF-2R

A yellow dye with good light fastness properties used for pale to medium shades.

Posted in Colors

TULAREVS Black B Conc (133%) | CAS No. Reactive Black 5

An economical navy dye with good build-up properties.

Posted in Colors

TULACTIV Black RL | CAS No. Reactive Black 31

A black dye used to develop black to grey shades. The product has good light fastness properties.

Posted in Colors

TULACTIV Turquoise H2GP | CAS No. Reactive Blue 77

A turquoise dye with good build-up properties.

Posted in Colors

TULACTIV Turquoise G (90%) | CAS No. Reactive Blue 21 133

A turquoise dye with good build-up properties.

Posted in Colors

TULACTIV Blue R (100%) | CAS No. Reactive Blue 19

A brilliant reddish blue dye used to develop bright royal blue shades.

Posted in Colors

TULACTIV Blue BB | CAS No. Reactive Blue 220

A trichromatic blue dye with good fastness properties. The product has good dischargeability.

Posted in Colors

TULACTIV Violet 5R | CAS No. Reactive Violet 5

A bright violet dye used for various shades of violet.

Posted in Colors

TULACTIV Red BS | CAS No. Reactive Red 111

An economical bluish red dye used for medium and dark shades.

Posted in Colors

TULACTIV Red RB | CAS No. Reactive Red 198

An economical trichromatic red dye.

Posted in Colors

TULACTIV Red 5 B | CAS No. Reactive Red 35

An economical trichromatic red dye with high tinctorial strength.

Posted in Colors

TULACTIV Orange 3R | CAS No. Reactive Orange 16

A bright orange dye used for orange and scarlet shades.

Posted in Colors

TULACTIV Orange 2R

An economical orange dye.

Posted in Colors

TULACTIV Yellow RNL | CAS No. Reactive Yellow 107

An economical golden yellow dye used in trichromatic combinations.

Posted in Colors

TULACTIV Yellow R | CAS No. Reactive Orange 201

A bright yellow dye used in tertiary combinations with good light fastness properties.

Posted in Colors

TULACTIV Yellow FG | CAS No. Reactive Yellow 42

A yellow dye with all round fastness properties.

Posted in Colors

NOVATIC Grey 2305 MD

An ideal grey component with excellent performance in Exhaust and Continuous dyeing applications by Soft flow and Pad Dry Pad steam techniques. The product has good all round fastness properties. It is available in Microperle and Micro disperse varieties.

Posted in Colors

NOVATIC Navy DS MD

A navy dye with excellent build-up properties used for coloration of workwear and institutional wear. The product is used in combination with Yellow 3R and Jade Green XBN for Exhaust application. It shows minimum shade change when used with flame

Posted in Colors

Xantho – Hexaconazole 5% EC | Xantho; Hexaconazole

A systemic fungicide with protective and curative action used to control broad spectrum fungal diseases in various field crops and fruits.

Posted in Crop Protection Brands

Rugo – 2,4-D Ethyl Ester 38% EC | 2,4-D | 2,4-D Ethyl ester | Rugo

A selective and systemic post-emergence herbicide readily absorbed by leaves. The product is used to control annual and perennial broad-leaved weeds in a range of crops.

Posted in Crop Protection Brands

para Cresol (UHP- Ultra high purity) | CAS No. 106-44-5 | 4-Methylphenol; p-Hydroxytoluene; p-Methylphenol; 4-Hydroxytoluene

A high purity grade of para Cresol for niche applications.

Posted in Aromatics

para Cresol | CAS No. 106-44-5 | 4-Methylphenol; p-Hydroxytoluene; p-Methylphenol; 4-Hydroxytoluene

A starting ingredient in most versatile phenolic group antioxidants.

Posted in Aromatics

Ambrettolide | CAS No. 28645-51-4 | 9-Hexadecenoic acid; 16-hydroxy-; o-lactone; Oxacycloheptadec-10-en-2-one

A naturally sourced aroma ingredient with a musk-like profile.

Posted in Aromatics

Skatole | CAS No. 83-34-1 | 3-Methyl-1H indole; Beta-methyl indole; 3-Methyl-4; 5-benzopyrrole

A key ingredient in specialty fragrance formulations.

Posted in Aromatics

Phenyl acetic acid | CAS No. 103-82-2 | Phenylethanoic acid; 2-Phenylacetic acid; α-Toluic acid; Benzeneacetic acid

An intermediate widely used by the Pharmaceuticals and Crop Protection Chemicals industry.

Posted in Aromatics

para Anisyl propanal | CAS No. 5462-06-6 | Hydrocinnamaldehyde p-methoxy- α –methyl 4-Methoxy-α-Methylbenzenepropanal 3-(4-methoxyphenyl)-2-methylpropanal 2-Methyl-3-(4-methoxyphenyl)propanal

An aroma ingredient with sweet, floral, fennel and basil-like, mildly fruity odour. The product finds a major application in oral care products, flavours and fragrances.

Posted in Aromatics

para Methoxy phenyl acetic acid | CAS No. 104-01-8 | 4-Methoxybenzeneacetic acid; Homoanisic acid; p-Anisylacetic acid

A key building block for Dextromethorphan, a widely used formulation to treat cough and cold.

Posted in Aromatics

Lapox B-47 | AH-714 | Maintenance, primer , low viscosity primer system, general application, construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 600 – 1,000 | Pot life @ 25oC (minutes) : 130 – 150

Posted in PO PM Industry

Lapox B-11 | AH-543 | Maintenance, primer , very low temperature curing, curing in high humidity, moist surface, construction

Mixing ratio (Parts by weight) : 100 : 66 | Mix viscosity @ 25oC (mPa s) : 4,500 – 5,500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Industry

Lapox AH-725 | polyamide curing agent, bonding, fast reactivity

Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 7,000 – 11,000 | Amine value (mg KOH/g) : 400 – 450 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox ARC-35 AH-676 | Electrical and Electronics, Electronics, Encapsulation, Pre-filled, “Hot cure Indoor”

Type of system : Pre-filled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 26 | Glass transition temperature (Tg) (oC) : 70 – 80 | Thermal class : F

Posted in PO PM Industry

Lapox ARC-30 | AH-714 | Electrical and Electronics, Vacuum potting, Pre-filled, “Cold cure Indoor”

Type of system : Pre-filled | Nature : Cold cure / Indoor | Mixing ratio (Parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 60 – 70 | Thermal class : B

Posted in PO PM Industry

Lapox ARL-111 | AH-358 | ARS-101

Type of system : Unfilled | Nature : Hot cure Indoor | Voltage class : MV / HV | Mixing ratio (parts by weight) : 100 : 15 | Glass transition temperature (Tg) (oC) : 80 – 90 | Thermal

Posted in PO PM Industry

Lapox K-24 | Aromatic amine, curing agent, construction, composite, coatings

Appearance : Yellow liquid | Colour (Gardner) : Max 8 | Viscosity @ 25oC (mPa s) : 1,000 – 2,500 | Amine value (Eq/kg) : 8.00 – 9.00 | Mixing ratio (Parts by weight) : 34

Posted in None

Lapox ARC-31 | AH-114 | AC-13 | Electrical and Electronics, Dry type Distribution Transformer, Encapsulation, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 100 : 0.0 – 0.2 | Glass transition temperature (Tg) (oC) : 90 – 100 | Thermal class :

Posted in PO PM Industry

Lapox ARD-58 | aromatic – monofunctional, reactive diluent, cardanol, coating, adhesives, electrical applications

Colour (Gardner) : Max 10 | Epoxy value (Eq/kg) : 2.20 – 2.60 | Viscosity @ 25oC (mPa s) : 20 – 50 | HyCl (%) : Max 1.00

Posted in PO PM Industry

Lapox ARD-15 (K-513) | aromatic – monofunctional, reactive diluent, cardanol, coating, adhesives, electrical applications

Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 1.80 – 2.40 | Viscosity @ 25oC (mPa s) : 40 – 70 | HyCl (%) : Max 1.00

Posted in PO PM Industry

Lapox ARD-12 (XR-59) | aromatic – monofunctional, reactive diluent, p-tertiary butyl phenol, high chemical resistance, flooring

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 4.10 – 4.50 | Viscosity @ 25oC (mPa s) : 20 – 35 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox ARD-11 (K-103) | aromatic – monofunctional, reactive diluent, phenol, flooring, electrical application

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.90 – 6.30 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox ARD-10 (K-100) | aromatic – monofunctional, reactive diluent, o-Cresol, high gloss, high mechanical strength, flooring, electrical application

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.30 – 6.00 | Viscosity @ 25oC (mPa s) : 6 – 8 | HyCl (%) : Max 0.20

Posted in PO PM Industry

Lapox C-1 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F

Posted in PO PM Industry

Lapox C-59 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, Hot cure Indoor

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (Parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F

Posted in PO PM Industry

Lapox C-2 | K-1 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoo | Mixing ratio (parts by weight) : 100 : 30 | Glass transition temperature (Tg) (oC) : 115 – 130 | Thermal class : F

Posted in PO PM Industry

Lapox ARC-18 | AH-123 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Prefilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio (parts by weight) : 100 : 25 | Glass transition temperature (Tg) (oC) : 122 – 132 | Thermal class : F

Posted in PO PM Industry

Lapox C-50 | K-225 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC) : 90 – 105 | Thermal class : H

Posted in PO PM Industry

Lapox C-50 | K-61 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC): 105 – 125 | Thermal class : H

Posted in PO PM Industry

Lapox C-17 | K-12 | K-13 | K-14 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Indoor | Mixing ratio : 100 : 100 : 0.5 – 1.5 : 0 – 20 | Glass transition temperature (Tg) (oC): 85 – 95 | Thermal class :

Posted in PO PM Industry

Lapox ARCH-12 | AH-215 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 80 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F

Posted in PO PM Industry

Lapox ARD-65 | aliphatic – trifunctional, reactive diluent, castor oil, concrete, flooring, thermal shock resistance

Colour (Gardner) : Max 6 | Epoxy value (Eq/kg) : 1.54 – 2.00 | Viscosity @ 25oC (mPa s) : 250 – 500

Posted in PO PM Industry

Lapox ARCH-12 | AH-214 | K-13 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 80 : 0.5 – 2.0 | Glass transition temperature (Tg) (oC) : 75 – 85 | Thermal class : F

Posted in PO PM Industry

Lapox ARCH-11 | AH-215 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio (Parts by weight) : 100 : 90 | Glass transition temperature (Tg) (oC): 100 – 110 | Thermal class : F

Posted in PO PM Industry

Lapox ARCH-11 | AH-214 | K-13 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Unfilled, “Hot cure Indoor”

Type of system : Unfilled | Nature : Hot cure / Outdoor | Mixing ratio : 100 : 90 : 0.5 – 2.0 | Mix viscosity : 1,000/80 | Glass transition temperature (Tg) (oC): 100 – 110 | Thermal class

Posted in PO PM Industry

Lapox ARD-55 (XR-85) | aerospace, reactive diluent, aliphatic-trifunctional, Trimethylol propane based reactive diluent

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 7.00 – 8.00 | Viscosity @ 25oC (mPa s) : 100 – 200 | HyCl (%) : Max 0.15

Posted in None

Lapox ARC-15 | AH-122 | Electrical and Electronics, Bushings, Conventional Vacuum Casting, Pre-filled, “Hot cure Indoor”

Type of system : Pre-filled | Nature : Hot cure Indoor | Mixing ratio (parts by weight) : 100 : 100 | Glass transition temperature (Tg) (oC) : 110 – 120 | Thermal class : H

Posted in PO PM Industry

Lapox ARD-56 (XR-87)

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.90 – 8.00 | Viscosity @ 25oC (mPa s) : 12 – 18 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-54 (XR-19)

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 2.90 – 3.20 | Viscosity @ 25oC (mPa s) : 40 – 90 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-52 (XR-86) | aliphatic – difunctional, reactive diluent, 1,6-hexane diol, aerospace

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 6.80 | Viscosity @ 25oC (mPa s) : 15 – 30 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-51 (K-77) | aliphatic – difunctional, reactive diluent, 1,4-butane diol

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 7.00 – 7.80 | Viscosity @ 25oC (mPa s) : 10 – 22 | HyCl (%) : Max 0.15

Posted in PO PM Industry

Lapox ARD-14 (XR-83) | aliphatic – monofunctional, reactive diluent, extreme low viscosity, construction, flooring

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 6.20 – 7.30 | Viscosity @ 25oC (mPa s) : Max 2 | HyCl (%) : Max 0.10

Posted in PO PM Industry

Lapox ARD-13 (XR-80) | aliphatic – monofunctional, reactive diluent, excellent wetting, excellent flexibility, flooring, coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 3.35 – 3.70 | Viscosity @ 25oC (mPa s) : 4 – 12 | HyCl (%) : Max 0.10

Posted in PO PM Industry

Lapox ARCH-11 (XR-34) | Cycloaliphatic resins, electrical casting, potting, UV resistance, outdoor coating

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.50 – 6.30 | Viscosity @ 25oC (mPa s) : 500 – 1,100

Posted in PO PM Industry

Lapox ARFM-14 (XR-106) | Bisphenol-A/F blends, solids coating, construction, floor coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.10 – 5.40 | Viscosity @ 25oC (mPa s) : 860 – 960

Posted in PO PM Industry

Lapox A-38 | K-99 | joints, moisture resistance, high adhesion, chemical resistant, construction adhesive

Mixing ratio (Parts by weight) : 100 : 40 | Mix viscosity @ 25oC (mPa s) : 50,000 – 1,00,000 | Pot life @ 25oC (minutes) : 20 – 25

Posted in PO PM Industry

Lapox ARPN-54 | K-41 | K-42 | Maintenance, mortar, screed, excellent chemical resistance, varying pot life, construction

Mixing ratio (Parts by weight) : 100 : 65 | Mix viscosity @ 25oC (mPa s) : 8,000 – 10,000 | Pot life @ 25oC (minutes) : 15 – 330

Posted in PO PM Industry

Lapox ARL-135 LV | Bisphenol-A based modified liquid epoxy resin, FRP , composites

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,000 – 1,500

Posted in PO PM Industry

Lapox ARL-135 | Bisphenol-A based modified liquid epoxy resin, FRP , composites

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.40 – 5.90 | Viscosity @ 25oC (mPa s) : 1,700 – 2,500

Posted in PO PM Industry

Lapox B-11 | K-48 | construction, Maintenance, repair, crack-filling, quick setting

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Industry

Lapox B-47 | K-48 | construction, Maintenance, grouting, quick setting, excellent adhesion, good strength

Mixing ratio (Parts by weight) : 100 : 18 | Mix viscosity @ 25oC (mPa s) : 600 – 700 | Pot life @ 25oC (minutes) : 15 – 25

Posted in PO PM Industry

Lapox B-11 | K-49 | construction, Maintenance, chemical resistant flooring, protection of metal structure, protection from corrossive chemicals, protection from alkali, protection from solvents

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,000 | Pot life @ 25oC (minutes) : 100 – 110

Posted in PO PM Industry

Lapox B-11 | K-41 | K-42 | construction, Maintenance, chemical resistant flooring, variable potlife system, excellent acid and alkali resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 6,000 – 8,000 | Pot life @ 25oC (minutes) : 15 – 300

Posted in PO PM Industry

Lapox ARPN-54 | AH-351 | Maintenance, mortar, screed, fast reactive system, excellent chemical resistance, construction

Mixing ratio (Parts by weight) : 100 : 30 | Mix viscosity @ 25oC (mPa s) : 5,000 – 7,000 | Pot life @ 25oC (minutes) : 25 – 35

Posted in PO PM Industry

Lapox ARPN-42 | AH-105 | construction, Maintenance, chemical resistant flooring, coal tar modified system, coating of pipes, vehile chassis, concrete structure

Mixing ratio (Parts by weight) : 100 : 100 | Mix viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Industry

Lapox B-47 | AH-416 | Maintenance, self-leveling system, low viscosity system, excellent gloss, excellent hardness, moderate chemical resistance

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Industry

Lapox B-11 | AH-428 | Maintenance, self-leveling system, moderate viscosity system, excellent gloos, good chemical resistance, construction

Mixing ratio (Parts by weight) : 100 : 45 | Mix viscosity @ 25oC (mPa s) : 800 – 1,200 | Pot life @ 25oC (minutes) : 30 – 40

Posted in PO PM Industry

Lapox ARB-26 | AH-416 | Maintenance, self-leveling system, low viscosity system, high gloss finish

Mixing ratio (Parts by weight) :100 : 60 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 40 – 50

Posted in PO PM Industry

Lapox ARB-22 | AH-428 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction

Mixing ratio (Parts by weight) : 100 : 43 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : 30 – 35

Posted in PO PM Industry

Lapox ARB-22 | AH-416 | Maintenance, self-leveling system, long pot life, excellent mechanical properties, construction

Mixing ratio (Parts by weight) : 100 : 55 | Mix viscosity @ 25oC (mPa s) : 500 – 700 | Pot life @ 25oC (minutes) : 45 – 60

Posted in PO PM Industry

Lapox B-47 | K-41 | K-42 | Maintenance, mortar, screed, varying pot life, excellent chemical resistance, construction

Mixing ratio (Parts by weight) : 100 : 60 | Mix viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : 35 – 330

Posted in PO PM Industry

Lapox B-47 | AH-713 | Maintenance, mortar, screed, standard system, system for extreme condition, screed lining, construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,500 – 4,500 | Pot life @ 25oC (minutes) : 110 – 130

Posted in PO PM Industry

Lapox B-47 | AH-546 | Maintenance, mortar, screed, standard system, system for extreme condition, moist surface, construction

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 3,000 – 4,500 | Pot life @ 25oC (minutes) : 60 – 80

Posted in PO PM Industry

Lapox ASH-11 | aerospace, curing agent, sulfone, 3,3′-Diaminodiphenyl sulfone, more reactive, fast curing, high productivity, powder

Chemistry : 3,3′-Diaminodiphenyl sulfone | Appearance : White to brownish white powder | Melting point (oC) : 167 – 175

Posted in None

Lapox ASH-10 MIC | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Micronised, micronised ASH-10, uniform dispersion in solvent-free resin, powder

Chemistry : 4,4′-Diaminodiphenyl sulfone Micronised | Appearance : White to off-white powder | Melting point (oC) : 176 – 180

Posted in None

Lapox ASH-10 FF | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone Free Flow, Free flowin ASH-10, easy operation , easy handling, powder

Chemistry : 4,4′-Diaminodiphenyl sulfone Free Flow | Appearance : White to off-white powder | Melting point (oC) : 176 – 185

Posted in None

Lapox ASH-10 | aerospace, curing agent, sulfone, 4,4′-Diaminodiphenyl sulfone, extremely slow reactivity, prepreg, advance composite, powder

Chemistry : 4,4′-Diaminodiphenyl sulfone | Appearance : White to off-white powder | Melting point (oC) : 176 – 185

Posted in None

Lapox AH-667

Chemistry : 4,4′-Diaminodiphenyl methane | Appearance : Viscous brownish liquid | Viscosity @ 60oC (mPa s) : 1,400 – 2,000

Posted in PO PM Industry

Lapox AH-618 (K-5200)

Appearance : Light yellow to brown liquid | Viscosity @ 25oC (mPa s) : 100 – 300

Posted in PO PM Industry

Lapox AH-442

Chemistry : 4,4′-Diaminodicyclohexyl methane | Appearance : Colourless transparent liquid | Melting point (oC) : 35 – 37

Posted in PO PM Industry

Lapox AH-422

Chemistry : 3,3’-Dimethyl-4,4’-diaminodicyclohexyl methane | Viscosity @ 25oC (mPa s) : 100 – 140

Posted in PO PM Industry

Lapox ARBMI-11 | aerospace, Bismaleimide resin, excellent thermal stability

Colour (Gardner) : Yellow powder | Melting point (oC) : 155 – 158

Posted in PO PM Industry

Lapox ARBZ-11 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability

Colour (Gardner) : Yellow solid | Viscosity @ 125oC (mPa s) : 50 – 500

Posted in PO PM Industry

Lapox ARBZ-10 A 75 | aerospace, benzoxazine resin, 75% solution in acetone

Colour (Gardner) : Yellowish liquid | Solid content (%) : 74 – 76 | Viscosity @ 25oC (mPa s) : 100 – 400

Posted in PO PM Industry

Lapox ARBZ-10 | aerospace, benzoxazine resin, excellent moisture resistance, low shrinkage, moderate flammability

Colour (Gardner) : Yellow solid | Viscosity @ 100oC (mPa s) : 1,000 – 7,000 | Softening point (oC) : 60 – 80

Posted in PO PM Industry

Lapox ARTF-50

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 4.17 – 4.44 | Viscosity @ 85oC (mPa s) : 1,000 – 1,500

Posted in PO PM Industry

Lapox ARTF-38 | aerospace, multifunctional resin, distilled unmodified resin, m-amino phenol based, high performance

Epoxy value (Eq/kg) : 9.80 – 10.6 | Viscosity @ 25oC (mPa s) : 1,500 – 4,800

Posted in PO PM Industry

Lapox ARTF-37 | aerospace, multifunctional resin, unmodified resin, m-amino phenol based, high performance

Epoxy value (Eq/kg) : 9.10 – 9.80 | Viscosity @ 25oC (mPa s) : 7,000 – 13,000

Posted in PO PM Industry

Lapox ARTF-36 | aerospace, multifunctional resin, distilled unmodified resin, p-amino phenol based, high performance

Epoxy value (Eq/kg) : 9.40 – 10.50 | Viscosity @ 25oC (mPa s) : 550 – 850

Posted in PO PM Industry

Lapox ARTF-35 | aerospace, multifunctional resin, unmodified resin, p-amino phenol based, high performance

Epoxy value (Eq/kg) : 8.70 – 9.50 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000

Posted in PO PM Industry

Lapox ARTF-34 | aerospace, multifunctional resin, specialty resin, triphenol methane based, high performance

Colour (Gardner) : Max 13 | Epoxy value (Eq/kg) : 5.88 – 6.66 | Viscosity @ 150oC (mPa s) : 30 – 55

Posted in PO PM Industry

Lapox ARTF-33 | aerospace, multifunctional resin, specialty resin, ethyl substituted MDA based, high performance

Colour (Gardner) : Max 7 | Epoxy value (Eq/kg) : 7.52 – 8.47 | Viscosity @ 25oC (mPa s) : 7,000 – 12,000

Posted in PO PM Industry

Lapox ARTF-23

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 8.55 – 9.00 | Viscosity @ 50oC (mPa s) : 3,000 – 6,000

Posted in PO PM Industry

Lapox ARTF-18 | aerospace, multifunctional resin, high viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000-19,000

Posted in PO PM Industry

Lapox ARTF-17 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 17,000-19,000

Posted in PO PM Industry

Lapox ARTF-16 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 13,000-15,000

Posted in PO PM Industry

Lapox ARTF-14 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 10,000 – 12,000

Posted in PO PM Industry

Lapox ARTF-13 | aerospace, multifunctional resin, medium viscosity, specialty resin, MDA based, high performance

Colour (Gardner) : Max 12 | Epoxy value (Eq/kg) : 7.46 – 8.55 | Viscosity @ 50oC (mPa s) : 7,000 – 11,000

Posted in PO PM Industry

Lapox ARPN-56 | aerospace, Epoxy Phenol Novolac resin, solid resin, functionality of 5.6

Colour (Gardner) : Max 4 | Epoxy value (Eq/kg) : 5.12 – 6.10 | Viscosity @ 50oC (mPa s) : 100 – 350

Posted in None

Lapox ARPN-25 | aerospace, Epoxy Phenol Novolac resin, low viscosity, average functionality, functionality of 2.5

Colour (Gardner) : Max 3 | Epoxy value (Eq/kg) : 5.59 – 5.81 | Viscosity @ 52oC (mPa s) : 1,100 – 1,700

Posted in PO PM Industry

Lapox ARN-16 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, medium viscosity

Colour (Gardner) : Max 16 | Epoxy value (Eq/kg) : 6.50 – 7.50 | Viscosity @ 50oC (mPa s) : 1,000 – 2,500 | Hycl : Max 0.20

Posted in PO PM Industry

Lapox ARL-15 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin, low viscosity

Colour (APHA) : Max 50 | Epoxy value (Eq/kg) : 5.71 – 5.95 | Viscosity @ 25oC (mPa s) : 4,000 – 5,000

Posted in PO PM Industry

Lapox ARL-12 | aerospace, bifunctional resin, Bisphenol-F based epoxy resin

Colour (Gardner) : Max 1 | Epoxy value (Eq/kg) : 5.26 – 5.55 | Viscosity @ 25oC (mPa s) : 9,000 – 12,000

Posted in PO PM Industry

Lapox P-5 (ARP-17) | Bisphenol-A based solid resins, type 7, stoving lacquers, can coating, tube coating

Epoxy value (Eq/kg) : 0.53 – 0.59 | Viscosity @ 25oC (mPa s) : 1,800 – 2,600 | Softening point (oC) : 110 – 120

Posted in PO PM Industry

Lapox K-541 (AH-541) | phenalkamine curing agent, high viscosity, marine coating, industrial coatings, protective coatings

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 15,000 – 35,000 | Amine value (mg KOH/g) : 290 – 325 | Pot life @ 25oC (minutes) : 40 – 85 | Mixing ratio (Parts by weight)

Posted in None

Lapox K-540 (AH-540) | phenalkamine curing agent, low viscosity, marine coatng, industrial coating, maintenance coating, protective coatings

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000 | Amine value (mg KOH/g) : 490 – 550 | Pot life @ 25oC (minutes) : 30 – 55 | Mixing ratio (Parts by weight)

Posted in None

Lapox AH-543 (XH-80) | phenalkamine curing agent, low colour, low viscosity, heavy duty anti-corrosive coatings , marine applications, protective coatings

Colour (Gardner) : Max 15 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000 | Amine value (mg KOH/g) : 300 – 350 | Pot life @ 25oC (minutes) : 50 – 65 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-420 (K-964) | cycloaliphatic amine curing agent, very low viscosity, moderate pot life, flooring, better chemical resistance, protective coatings

Colour (Gardner) : Max 3 | Viscosity @ 25oC (mPa s) : 40 – 60 | Amine value (mg KOH/g) : 320 – 340 | Pot life @ 25oC (minutes) : 25 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-411 | unmodified cycloaliphatic amine curing agent, coatings, flooring applications, composite applications, protective coatings

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 10 – 20 | Pot life @ 25oC (minutes) : 90 – 120 | Mixing ratio (Parts by weight) : 23

Posted in PO PM Industry

Lapox XH-61 (AH-321) | modified polyamine adduct solution, solution in xylene and butanol, clear coating, protective coating

Colour : Max 2 | Viscosity @ 25oC (mPa s) : 1,500 – 2,000 | Amine value (Eq/kg) : 165 – 210 | Pot life @ 25oC (hours) : 4 – 6 | Mixing ratio (Parts by weight) : 30

Posted in PO PM Industry

Lapox K-306 | Butylated melamine formaldehyde curing agent, enamel, polyester film coating, protective coating

Colour (Gardner) : Clear liquid | Viscosity @ 25oC (mPa s) : 850 – 1,200 | Mixing ratio (Parts by weight) : 100 (with resin ARL-148)

Posted in PO PM Industry

Lapox K-105 | coal tar modified polyamine adduct, high build coatings, protective coating

Colour (Gardner) : Black | Viscosity @ 25oC (mPa s) : 3,000 – 6,000 | Pot life @ 25oC (minutes) : Min 20 | Mixing ratio (Parts by weight) : 100 (with resin ARB – 28)

Posted in PO PM Industry

Lapox K-54 (AH-356) | modified polyamine adduct, slids coating, mortar, adhesives, protective coating

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 2,900 – 3,600 | Amine value (mg KOH/g) : 398 – 415 | Pot life @ 25oC (minutes) : 15 – 30 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox K-48 (AH-319) | modified polyamine curing agent, low vapour pressurehigh reactivity, adhesives, composites, castings, coatings, protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 200 – 300 | Amine value (Eq/kg) : 17.00 – 17.80 | Pot life @ 25oC (minutes) : 25 – 35 | Mixing ratio (Parts by weight) :

Posted in PO PM Industry

Lapox K-7 | unmodified aliphatic polyamine curing agent, adhesives, castings, coatings, composites, protective coating

Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : Max 10 | Pot life @ 25oC (minutes) : 20 – 25 | Mixing ratio (Parts by weight) : 10 – 12

Posted in PO PM Industry

Lapox K-6 | unmodified aliphatic polyamine curing agent, casting, coatings, composites, protective coating

Colour (Gardner) : Max 3 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight) : 10 – 12

Posted in PO PM Industry

Lapox AH-371 to AH-373 | modified polyamine curing agent, crack-filling, stone coating, mortar, adhesive, protective coating

Colour (Gardner) : Max 5 | Viscosity @ 25oC (mPa s) : 100 – 550 | Amine value (mg KOH/g) : 500 – 1,000 | Pot life @ 25oC (minutes) : 5 – 30 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-351 | modified polyamine curing agent, chemical resistance, sulphuric acid resistance, protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 500 – 1,000 | Amine value (mg KOH/g) : 650 – 750 | Pot life @ 25oC (minutes) : 30 – 40 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-348 | unmodified aliphatic polyamine curing ag nr, flexible casting, transparent casting, coatings, protective coating

Colour (Gardner) : Max 1 | Viscosity @ 25oC (mPa s) : 5 – 10 | Amine value (mg KOH/g) : 680 – 720 | Pot life @ 25oC (minutes) : 40 – 50 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-341 | modified aliphatic polyamine curing agent, solids coating, long pot life, protective coating

Colour (Gardner) : Max 2 | Viscosity @ 25oC (mPa s) : 30 – 100 | Amine value (mg KOH/g) : 290 – 320 | Pot life @ 25oC (minutes) : 100 – 125 | Mixing ratio (Parts by weight)

Posted in PO PM Industry

Lapox AH-313 | unmodified aliphatic polyamine curing agent, adhesives, casting, coating, composite applications, protective coating

Colour (Gardner) : Max 4 | Viscosity @ 25oC (mPa s) : 50 – 60 | Pot life @ 25oC (minutes) : 35 – 50 | Mixing ratio (Parts by weight) : 15

Posted in PO PM Industry

Lapox K-92 | Aromatic amine, ambient cure modified curing agent, chemical resistant coating, tank lining, flooring, protective coating

Appearance : Brown liquid | Colour (Gardner) : Max 13 | Viscosity @ 25oC (mPa s) : 5,000 – 7,500 | Amine value (Eq/kg) : 4.40 – 5.10 | Mixing ratio (Parts by weight) : 60

Posted in PO PM Industry

Lapox ARL-143 | AH-335 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 85 – 95 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Industry

Lapox ARL-143 | AH-319 | industrial, RTM, hand lay-up and infusion systems, moderate viscosity system, varying pot life, fire retardannt application

Mixing ratio (Parts by weight) : 100 : 15 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : 20 – 25 | Glass transition temperature (Tg) (oC) : 95 – 105

Posted in PO PM Industry

Lapox ARCH-13 | Cycloaliphatic resins, higher toughness, outdoor coating, electrical casting, flooring, protective coating

Colour (APHA) : Max 100 | Epoxy value (Eq/kg) : 4.16 – 4.54 | Viscosity @ 25oC (mPa s) : 2,000 – 4,000

Posted in PO PM Industry

Lapox ARF-15 | Bisphenol-F based resin, very low viscosity, distilled version, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 6.00 – 6.40 | Viscosity @ 25oC (mPa s) : 1,200 – 1,600

Posted in PO PM Industry

Lapox ARF-14 | Bisphenol-F based resin, high viscosity, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.30 | Viscosity @ 25oC (mPa s) : 5,000 – 7,000

Posted in None

Lapox ARF-13 | Bisphenol-F based resin, medium viscosity, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 3,300 – 4,100

Posted in None

Lapox ARF-12 | Bisphenol-F based resin, low viscosity, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.80 – 6.10 | Viscosity @ 25oC (mPa s) : 2,000 – 3,000

Posted in None

Lapox ARF-11 (XR-40) | standard Bisphenol-F based resin, constructon, composites, electrical, casting, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 5.70 – 6.30 | Viscosity @ 25oC (mPa s) : 2,000 – 5,000

Posted in PO PM Industry

Lapox P-122 (ARP-14 A) | Bisphenol-A based solid resins, functional powder coating, rebar coating, protective coating

Epoxy value (Eq/kg) : 1.07 – 1.16 | Viscosity @ 25oC (mPa s) : 620 – 900 | Softening point (oC) : 100 – 110

Posted in None

Lapox P-62 (ARP-13) | Bisphenol-A based solid resins, standard solid resin, powder coating, protective coating

Epoxy value (Eq/kg) : 1.25 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 700 | Softening point (oC) : 95 – 101

Posted in PO PM Product

Lapox ARPN-36 | K-86 | industrial, prepregs and laminating systems, compressed laminate system, B-stage prepreg

Mixing ratio (Parts by weight) : 100 : 3-6 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 165 – 180

Posted in PO PM Industry

Lapox ARPN-36 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, very high Tg, very high glass transition temperature

Mixing ratio (Parts by weight) : 100 : 32-40 : 1-3 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 170 – 185

Posted in PO PM Industry

Lapox L-247 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, general purpose system, fire retardant

Mixing ratio (Parts by weight) : 100 : 64 : 1-3 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Industry

Lapox L-12 | K-24 | industrial, filament winding and pultrusion, hot cure system, low viscosity system, long pot life, high chemical resistance, high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 34 | Mix viscosity @ 25oC (mPa s) : 3,500 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) oC : 145 – 155

Posted in PO PM Industry

Lapox L-12 | K-12 K-13 | industrial, filament winding and pultrusion, hot cure system, standard system, fast reactivity

Mixing ratio (Parts by weight) : 100 : 100 : 1-3 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 95 –

Posted in PO PM Industry

Lapox L-12 | AH-667 | industrial, filament winding and pultrusion, hot cure system, high chemical resistance, high abrasion resistance

Mixing ratio (Parts by weight) : 100 : 27 | Mix viscosity @ 50oC (mPa s) : 3,000 – 5,000 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Industry

Lapox L-12 | AH-113 | K-13 | industrial, filament winding and pultrusion, hot cure system, flame retardancy

Mixing ratio (Parts by weight) : 100 : 95 : 0.5-2.0 | Mix viscosity @ 25oC (mPa s) : 1,900 – 2,100 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 165 –

Posted in PO PM Industry

Lapox ARL-136 | AH-126 | industrial, filament winding and pultrusion, hot cure system, superior fiber wetting, excellent mechanical properties, good surface finish

Mixing ratio (Parts by weight) : 100 : 90 | Mix viscosity @ 25oC (mPa s) : 300 – 600 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 – 125

Posted in PO PM Industry

Lapox ARF-11 | K-918 | K-13 | industrial, filament winding and pultrusion, hot cure system, non-crystallisable, excellent chemical resistance

Mixing ratio (Parts by weight) : 100 : 90 : 1-3 | Mix viscosity @ 25oC (mPa s) : 300 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 115 –

Posted in PO PM Industry

Lapox ARCH-11 | K-3 | K-13 | industrial, filament winding and pultrusion, hot cure system, out door application, UV resistance

Mixing ratio (Parts by weight) : 100 : 85 : 1-3 | Mix viscosity @ 25oC (mPa s) : 200 – 500 | Pot life @ 25oC (minutes) : > 8 | Glass transition temperature (Tg) (oC) : 105 –

Posted in PO PM Industry

Lapox L-12 | AH-337 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 400 – 700 | Pot life @ 25oC (minutes) : 300 – 380 | Glass transition temperature (Tg) oC : 90 – 105

Posted in PO PM Industry

Lapox L-12 | AH-336 | industrial, filament winding and pultrusion, ambient cure system, high Tg, high glass transition temperature, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 80 – 100 | Glass transition temperature (Tg) oC : 90 – 105

Posted in PO PM Industry

Lapox L-12 | AH-335 | industrial, filament winding and pultrusion, ambient cure system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 1,200 | Pot life @ 25oC (minutes) : 50 – 60 | Glass transition temperature (Tg) oC : 90 – 105

Posted in PO PM Industry

Lapox L-12 | AH-315 | industrial, filament winding and pultrusion, ambient cure system

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 500 – 800 | Pot life @ 25oC (minutes) : 7 – 9 hr | Glass transition temperature (Tg) oC : 85 –

Posted in PO PM Industry

Lapox ARL-12 | AH-714 | industrial, filament winding and pultrusion, ambient cure system, superior adhesion, toughness

Mixing ratio (Parts by weight) : 100 : 50 | Mix viscosity @ 25oC (mPa s) : 1,200 – 1,500 | Pot life @ 25oC (minutes) : 120 – 150 | Glass transition temperature (Tg) oC : 55 – 65

Posted in PO PM Industry

Lapox ARL-125 | AH-332 | aerospace, RTM, hand lay-up, infusion, long pot life, high Tg, high glass transition temperature

Mixing ratio (Parts by weight) : 100:32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 80 – 90

Posted in PO PM Industry

Lapox ART-24 | AH-326 | automotive, tooling, gel coat system

Mixing ratio (Parts by weight) : 100 : 20 | Mix viscosity @ 25oC (mPa s) : Paste (colourless) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 95 – 115

Posted in PO PM Industry

Lapox ART-23 | AH-326 | automotive, tooling, gel coat system

Mixing ratio (Parts by weight) : 100 : 10 | Mix viscosity @ 25oC (mPa s) : Paste (blue) | Pot life @ 25oC (minutes) : 15 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ART-21 | AH-326 | automotive, tooling, gel coat system

Mixing ratio (Parts by weight) : 100 : 14 | Mix viscosity @ 25oC (mPa s) : Paste (white) | Pot life @ 25oC (minutes) : 25 – 30 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox ARL-135 LV | AH-411 | automotive, RTM, hand lay-up and infusion systems, very low viscosity, high Tg, high glass trransition temperature

Mixing ratio (Parts by weight) : 100 : 24 | Mix viscosity @ 25oC (mPa s) : 250 – 400 | Pot life @ 25oC (minutes) : 90 – 120 | Glass transition temperature (Tg) (oC) : 125 – 135

Posted in PO PM Industry

Lapox ARL-135 LV | AH-333 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 750 | Pot life @ 25oC (minutes) : 14 – 20 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox B-7 | semi-solid, can coating, coil coating, protective coating

Colour (Gardner) : Max 2 | Epoxy value (Eq/kg) : 3.57 – 4.45 | Viscosity @ 25oC (mPa s) : 450 – 800

Posted in None

Lapox ARL-135 LV | AH-332 | automotive, RTM, hand lay-up and infusion systems, low viscosity system, variable pot life

Mixing ratio (Parts by weight) : 100 : 32 | Mix viscosity @ 25oC (mPa s) : 600 – 800 | Pot life @ 25oC (minutes) : 8 – 14 | Glass transition temperature (Tg) (oC) : 75 – 85

Posted in PO PM Industry

Lapox P-10 (ARP-14 E) | Bisphenol-A based solid resins, esterifcation, anodic electrodeposition

Epoxy value (Eq/kg) : 1.08 – 1.18 | Viscosity @ 25oC (mPa s) : 430 – 550 | Softening point (oC) : 90 – 100

Posted in PO PM Industry

Lapox ARP-14 HF | Bisphenol-A based solid resins, modified resin, powder coating, better flow

Epoxy value (Eq/kg) : 1.23 – 1.33 | Viscosity @ 25oC (mPa s) : 480 – 580 | Softening point (oC) : 80 – 90

Posted in None

Lapox ARP-13 LV | Bisphenol-A based solid resins, hybrid powder coating

Epoxy value (Eq/kg) : 1.33 – 1.40 | Viscosity @ 25oC (mPa s) : 500 – 600 | Softening point (oC) : 95 – 101

Posted in None

Lapox ARL-160 | AH-359 | automotive, prepreg system, FRP structural component

Mixing ratio (Parts by weight) : 100 : 5 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 110 – 120

Posted in PO PM Industry

Lapox ARL-159 | AH-357 | AC-22 | automotive, prepreg system, hot melt prepreg system, very high Tg, very high glass transition temperature,

Mixing ratio (Parts by weight) : 100 : 15 : 2 | Pot life @ 25oC (hours) : > 8 | Glass transition temperature (Tg) (oC) : 155 – 165

Posted in PO PM Industry

Lapox L-68 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, FR-4 laminate

Mixing ratio (Parts by weight) : 100 : 32 : 1-3 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Industry

Lapox L-67 | K-66 | K-13 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, G-10 laminate

Mixing ratio (Parts by weight) : 100 : 23 : 0.5-3.0 | Pot life @ 25oC (weeks) : 2 – 3 | Glass transition temperature (Tg) (oC) : 130 – 140

Posted in PO PM Industry

Lapox ARP-13 HT | Bisphenol-A based solid resins, powder coating

Epoxy value (Eq/kg) : 1.25 – 1.35 | Viscosity @ 150oC (mPa s) : 4,500 – 6,500 | Glass transition temperature (Tg) (oC) : 55

Posted in None

Lapox L-12 | K-10 | K-86 | automotive, prepregs and laminating systems, compressed laminate, B-stage prepreg, shelf life upto 6 month, G-11 laminate

Mixing ratio (Parts by weight) : 100 : 35 : 1-3 | Pot life @ 25oC (weeks) : 6 – 8 weeks | Glass transition temperature (Tg) (oC) : 150 – 160

Posted in PO PM Industry

Lapox ARP-12 | Bisphenol-A based solid resins, medium molecular weight, powder coating

Epoxy value (Eq/kg) : 1.42 – 1.53 | Viscosity @ 25oC (mPa s) : 375 – 475 | Softening point (oC) : 80 – 90

Posted in PO PM Industry
Scroll Up
WordPress Video Lightbox